QA

How High To Install Shower Curtain Rod

Shower Curtain Rod Height A standard shower curtain is typically 72 inches long, so the curtain rod should be installed around 75 to 77 inches from the floor. This height will keep the shower curtain from touching the floor.

Where should the shower curtain rod be placed?

For best fit, shower curtain should be 6″ – 12″ wider than shower rod. Mount rod approximately 3″ inside the point a straight rod is normally mounted. The midpoint of the rod should extend several inches past the outside rim of the tub. Depending upon tub model, mount rod between 6″ and 8″ from center line of the tub.

How far off floor should shower curtain hang?

The curtain rod should be installed around 75 to 77 inches from the floor, since a standard shower curtain is 72 inches long. The shower curtain can’t touch the floor.

Should shower curtain be higher than shower head?

The rule of thumb is to put the shower curtain rod three to five inches higher than the shower curtain’s length. At the least, you want the curtain to hang at least six inches past the rim of the tub.

How high do you hang a curved shower curtain rod?

The standard shower curtain is 72 inches (183 cm) long, and when it is linked to shower hooks, it usually gains another two inches (five cm). To prevent the curtain from dragging on the floor of the tub, hang the curved shower rod at a height of 74 inches or more.

Do shower curtains go inside or outside of the tub?

The primary purpose of a curtain liner is to prevent the water from splashing out while you take a bath. Hence, it should be kept inside the tub or the shower base. Many shower curtain liners will have some magnets attached to the bottom part, so they stick to the inside of the tub.

Should you keep your shower curtain open or closed?

A shower curtain should be closed when not in use. Once you leave it open, mold and mildew can develop inside the folds. This is because an open shower curtain folds on itself which makes causes the water to get trapped between the plastic and makes it hard to dry. This can eventually cause mold to grow.

Should shower liner be shorter than curtain?

The length of your curtain is really less about sanitation issues than it is about style and functionality. If you choose, you can keep your curtain long enough to touch the floor, as long as your inner liner reaches at least 6 inches into your tub to reduce any potential water leakage.

Do shower curtains need to touch the floor?

No, your shower curtain is not supposed to touch the floor. The simple reason for this is it will help prevent the bottom of the curtain from collecting too much moisture and dirt. Therefore, leave at least two inches of space between the curtain hem and the bathroom floor.

How do you measure a curved shower rod?

Measure from either the wall of the tub or the floor, just as long as the mark on both walls is at the same height. Extend the measuring tape from the wall at the front of the tub or shower enclosure to the wall at the other end — lengthwise — of the shower enclosure. Mark down the measurement on a piece of paper.

Why do hotels use cloth shower curtains?

They are decorative, in keeping with the decorative scheme employed in the bathroom. They also provide privacy for the person showering. However, they also are available in clear plastic. As others have said, having a clear curtain and/or liner allows light into the shower.

Are 2 shower curtains necessary?

Having two shower curtains makes for a unique aesthetic. There are two general reasons you would want to use two shower curtains—you have a large shower area to cover or you wish to design a distinctive space. If you want to make a big impact on the overall look of your bathroom, then this is the way to do it.

Why do shower curtains turn yellow?

Most discoloration on shower curtains, whether plastic or fabric, comes from soap scum and mildew. Even if the curtain is very discolored, stains that come from soap and water can usually be removed with soap and water.

How often should plastic shower curtains be replaced?

Shower Curtains & Shower Curtain Liners: Every 6 Months If you have a plastic shower curtain liner, it’s easy to see when mold, mildew, or other buildup has accumulated. You can wash it with a diluted bleach solution and a sponge, throw it in the washing machine (hang to dry), or just toss it and purchase a new one.

Do shower curtains grow mold?

Mildew growth on your shower curtain is mainly caused by moisture that remains after you shower or bathe. Although many people may discard their shower curtain and replace it with a fresh, new curtain or liner, there are preventative steps you can take on a regular basis to stop mildew growth before it occurs.

What is the standard shower curtain rod size?

Since the standard shower curtain height is between 70 and 72 inches, the standard shower curtain rod height is around 75 and 77 inches.

What size shower rod do I need?

Measure the width of the entire space the curtain will fit over. This typically is the front section of the shower or bathtub. Measure in inches, then choose a rod that fits the opening. Keep in mind that standard shower curtains are 70 or 72 inches wide.

What is the diameter of a shower curtain rod?

Shower Rod – 1-1/4 inch diameter, 72 inches long, 18 gauge.

What do you do when your shower curtain is too short?

These 3 Cheap Hacks Can Fix The Most Annoying Shower Curtain Problem Link Extra Sets Of Shower Rings Together. Use String Or Ribbon Instead of Shower Rings and Adjust the Length to Fit. Use Extra-Long Shower Curtain Rings.