Table of Contents
As a general rule of thumb, the best height for most walls sits around one-third the distance up the wall from the floor. So, in an eight-foot-tall room, you’d want to hang your chair rail moulding at around 32 inches from the ground. Other experts say that around 25% of the wall’s height is a better placement.
How do you measure for chair rail molding?
To determine the height of the chair rail, measure the height of the ceiling and divide it by three. The general rule is that the chair rail should be about 1/3 of the way up from the floor (between 32″ and 36″ for an 8′ ceiling). You can also slide a chair up to the wall and mark where it would hit the wall.
Do you wallpaper above or below a chair rail?
WALLPAPER IDEAS Install a chair rail to divide the walls of a large room horizontally, then wallpaper only above or below this chair rail and paint the remainder.
Is chair rail out of style 2020?
Chair rails are still used today to create a more formal and traditional design. If that’s the look your sister wants, chair rails would be a good choice.
Can you put chair rail on only one wall?
A chair rail, also known as a dado rail, is a horizontal piece of trim that usually runs the perimeter of a room approx 36″ from the floor, but can also be awkwardly placed on a single wall (popular in the ’90s).
Which side of chair rail goes up?
There is no right or wrong orientation for a chair rail unless the shape is very obviously intended to have a shelf along the top. It’s a design feature that you can fit to express your own likes and room design.
Does chair rail have to match baseboards?
Like many creative pursuits, interior design has guidelines, but no hard and fast rules. The typical trend is to match your chair rail and baseboard colors, but playing with this trend the right way can also make a dramatic visual statement.
Can I use chair rail for crown molding?
In a traditional sense – no. Crown molding is not used as a chair rail. Crown molding is designed to cover imperfections where the walls of a room meet the ceiling. A chair rail, which sits much lower on the walls, typically has a much slimmer profile and doesn’t extend as far from the wall as crown molding.
What color should chair rail be?
It is best to paint the lighter or warmer color on the upper portion of the wall to create a more open feel to the room. The chair rail and other trim should be painted in a neutral or light complementary color.
Does chair rail add value?
Value! Of all the home improvements you can make, chair rail is one of the least demanding in terms of cost and labor. Studies have shown that installing moldings (like crown or chair rail) can have a positive impact on the selling price of a home.
Can you put a chair rail in a bedroom?
Simply install a chair rail in the bedroom and you’re on your way. Bedroom chair rail molding is inexpensive and easy to install, and provides an opportunity to introduce a second paint color, wallpaper, or beadboard above or below the molding, as these bedroom chair rail ideas demonstrate beautifully.
What can I use instead of a chair rail?
Chair Rail Alternatives Ribbon. Use ribbon as a chair rail alternative by adhering it with a thin coating of wallpaper glue. Paint Shades and Patterns. Fabric. Vinyl Appliqués. Decorative Buttons.
What height should wainscoting be?
What is the proper height for wainscoting? Generally, the cap sits about one-third the way up the wall. So if the ceiling is 9 feet, go for 3-foot wainscoting. For taller wainscoting, such as one with a plate rail, cap it two-thirds the way up the wall.
Do you caulk chair rail?
As with any woodwork, chair rails require a certain amount of maintenance. Most moldings are attached using nothing but nails and over time can become loose. Using caulk to seal the seams of chair rails can give them just the extra bit of flex they need to maintain their position for years to come.
What is best height for chair rail with 9 ceilings?
“About 28 to 32 inches is an optimum range for chair rail height,” says Hull. “Lower is always better than higher. For me, a good rule of thumb is to install chair rail molding at 25% of the height of the room. In a room with a 10-foot-high ceiling, the chair rail should be 30 inches off the floor.
What’s the difference between chair rail and wainscoting?
Wainscoting is usually a complete piece of paneling (usually wood). Panel molding reaches above the chair rail (typical chair rail height is approximately 32″ above the floor) and sometimes covers the entire wall.
How wide should chair rail be?
The chair rail should measure, at minimum, as wide as the top bar of the chairs. If the chair rail is for decoration or you aren’t working with a homeowner directly, choose a rail between two and four inches wide. Wider chair rails work better in rooms with higher ceilings.
Does chair rail go on top of wainscoting?
Add Molding Add the trim using the same basic method as the paneling. Use a nail gun or hammer and nail set to attach the chair-rail molding over top of the wainscoting.
How high do you put beadboard?
While the height of beadboard may vary from room to room, 30 to 54 inches is the general height range for most uses.
What is the standard height of a stair rail?
Handrail height on the stairs should be no less than 34 inches and no greater than 38 inches. The way this is measured is to begin at the leading edge of the stair nosing and run an imaginary vertical line upward until it reaches the top of the railing.
How far apart should handrail brackets be placed?
We recommend spacing the Brackets 36 to 48 inches apart. In most cases, it is desirable to transition the Handrail past the last stair with a horizontal rail of 6 to 12 inches. Some local codes require this extension be 12 inches. Contact your local authorities to confirm requirements.
How do you install a chair rail without a nail gun?
How To Install Chair Rail Without A Nail Gun: 5 Easy Steps Step #1. Measure your space. Step #2. Cut the molding. Step #3. Drill into the studs of your wall. Step #4. Fasten your molding. Step #5. Do the finishing touches.
