Table of Contents
It’s probably about 22.5-25.5 inches from the ground to the top of the mattress (25 inches is typical for most standard beds). Choose a nightstand that’s approximately 23.5 inches high for the perfect fit.
Should a nightstand be higher or lower than the bed?
Proper Nightstand Height As a general rule of thumb, the top of your nightstand should be level with the top of your mattress, or about 2-4” taller. It’s much easier for somebody to reach above to grab something when they’re laying on the bed, as opposed to reaching below.
Can a nightstand be lower than the bed?
RULE: 24”-27” is the ideal height for a nightstand but just keep the height 5″ higher or lower than the top of your mattress. Ideally, your nightstand will be around the exact same height as the top of your mattress so that you can easily access it.
Do nightstands have to be the same height?
First, think about the scale and height of nightstands in relation to the bed. And, while many people opt for matching nightstands, that’s not absolutely necessary. That’s the traditional approach, yes—but as with all design traditions, rules are meant to be broken!Oct 4, 2020.
How far from the wall should a nightstand be?
Your bedside table should be within reach of your bed. Spacing in a room is important, so it should be at least one or two inches from the side of your bed, level with your mattress, or a few inches taller. However, it can be further depending on your reach and your personal design preferences.
How tall should a bedside table lamp be?
Assuming that your nightstand is the same height as your mattress (or within a couple of inches), look for a lamp the same height as your nightstand plus an extra 2 or 3 inches. So if your nightstand is 24 inches high, a lamp that is around 27 inches tall will look best.
How tall should an end table be?
Standard end table height ranges between 18-24 inches. In other words, these tables range from approximately 1.5-2 feet off the ground, with an average width of around 16-22 inches.
What is the purpose of a nightstand?
They are often used to support items that might be useful during the night, such as a table lamp, alarm clock, reading matter, cell phone, eyeglasses, tissues, sex toys, a drink, or medication.
How can I make my nightstand taller?
Some of the ways to raise your nightstand include: Add something on top to make your nightstand higher. Use furniture risers on the bottom of your nightstand. Use a piece of furniture to raise the nightstand. Pay a carpenter to raise it however you like.
Should my nightstand match my bed?
Matching nightstands is the best option to begin with. Nightstands are smaller in proportion to the bed, or a wardrobe. As long as the bed is central and of a different style and finish it will break the pair up. Saying that, you do not have to match your nightstands.
Can you use end tables as nightstands?
An end table may make a perfectly good nightstand if it fits into your bedroom decor, while a piece marketed as a nightstand may look great in the living room with no one the wiser.
How much space should be between foot and bed?
For ideal bed placement, allow at least 24 inches between the bed and the wall to get out of bed comfortably and allow 36 inches between the end of the bed and the bedroom or bathroom door.
Can nightstands go in front of windows?
A large nightstand will naturally look good in front of a window because it will fill up the entire space and give it a proportional feel. Versus a small nightstand in front of a window might look out of place. I would say 30 to 32 inches should be the maximum height for a nightstand in front of a window.
Where should end tables be placed?
The most obvious place to put an end table is on either side of your sofa. Placing these tables in this position means that you will have everything you need at an arm’s length.
How wide should a nightstand be for a queen bed?
NIGHTSTAND WIDTH & DEPTH Queen beds: 22″ to 24″ x 23″ to 27″ is a great size range for nightstands paired with a queen bed. King bed: 23″ to 25″ and larger width and depth will work well with you king size bed.
Should a bedside lamp be higher than the headboard?
For a bed with a tall and ornate headboard, a tall, ornate lamp will work well. It will complement the size of the headboard and the décor of the room. For a floor lamp, The top of the lampshade should ideally be no more than 48 inches from the top of the mattress.
Does lamp height include shade?
The shade should be twice as wide as the lamp base, and one third of the total height of the lamp. So for a 6-inch lamp base, the shade should be at least 12 inches wide. And if the total height of the lamp (including the bulb and harp) is 24 inches, the shade should be 8 inches tall.
What is the average height of a bedside table?
It’s probably about 22.5-25.5 inches from the ground to the top of the mattress (25 inches is typical for most standard beds). Choose a nightstand that’s approximately 23.5 inches high for the perfect fit.
What is the average size of a bedside table?
An average nightstand measures around 20″ wide and 20″ deep. The height of the nightstand should be equal — or close to — the height of your bed frame and mattress so that the pieces align properly.
How tall should living room end tables be?
“End tables for living rooms are usually 25 to 30 inches tall, but the arm height of most sofas is 25 inches, which means most end tables are taller than the sofa arm,” he said. “It’s not a good look. Your guests should be able to place a martini on the table without reaching up to the heavens.”Nov 3, 2010.
