QA

Quick Answer: How High Should Kitchen Cabinets Be From Countertop

Height Matters The standard distance between the top of a kitchen counter and the bottom of the wall cabinets above it is 18 inches. For the average person, this distance is the ideal balance between plenty of space to work on the countertop and the ability to reach all of the shelves in the cabinet.

How high should cabinets be above countertop?

How high should wall cabinets be hung above the counter? “The standard distance is 18 inches” from the top of the counter to the bottom of the wall cabinet, Scott says.

What is the normal height for upper kitchen cabinets?

What is the standard size for upper kitchen Cabinets? The average wall or upper kitchen cabinets are 30”-42” in Height, 12”-24” in Depth, and 9”-36” in Width.

How high is too high for upper cabinets?

Anything over 20 inches above counter top is too high.

How high should a cabinet be from the floor?

The standard height for upper cabinets from the floor is 54 inches, or 4 feet and 6 inches. This means the bottom of the upper cabinets should be this far from the floor. This comes from the sum of 34-and-a half-inch base cabinets, a 1-and-a-half inch thick countertop, and an 18-inch backsplash.

How high should the bottom of upper cabinets be?

The height between the top of the countertop and the bottom of the upper cabinet should be 18 inches, the height of a standard backsplash.

How high should cabinets be for an 8 foot ceiling?

Ceiling Height A general rule of thumb is for wall cabinets to be mounted so the bottom edge is 54 inches above the floor, which means that an 8-foot-tall ceiling creates 42 inches of available space for wall cabinets, while a 9-foot-tall ceiling has 54 available inches.

How high should wall cabinets be above worktop?

Wall Cupboards are usually fitted 500mm above a 900mm high worktop, though if your worktop is thicker than 30mm then this dimension will diminish. 500mm is a comfortable dimension and if you have any Tall Cupboards in your kitchen the cupboard tops will line through.

Do upper and lower kitchen cabinets have to line up?

Luckily, there are few rules about cabinet placement. Upper and lower cabinets may align at each end, and they sometimes do. However, aligning every upper and lower cabinet throughout the room is rare. As long as the cabinets are installed securely, almost anything goes.

How do you add height to kitchen cabinets?

How To Add Height To Kitchen Cabinets Step 1: Remove Existing Crown Moulding. Step 2: Lumber & Trim Moulding. Step 3: Attaching the Boards. Step 4: Adding Trim & Crown Moulding. Step 5: Caulk, Prime & Paint.

Why do kitchen cabinets not go to ceiling?

Disadvantages of Kitchen Cabinets That Go All The Way Up to the Ceiling. Ceiling height cabinets are not easy to access as they are very high up in the ceiling. Anything up there at the top of these cabinets is quite hard to access hence you will need to have something to step on in order to reach these things.

Can kitchen cabinets be too tall?

For those with extra high ceilings in the kitchen, those ceilings higher than 10 feet, the general rule of thumb is not to take the cabinetry to the ceiling. Functionally, cabinets higher than 10 feet would be extremely difficult to get to, and aesthetically, cabinets that are too tall can overwhelm the space.

How do you fill the gap between kitchen cabinets and ceiling?

You can build the cabinets to the ceiling (most expensive option), keep the area open (no cost!), build a soffit to match the cabinets, or add a drywall soffit.

How high should kitchen cabinets be UK?

Most worktop surfaces measures 900mm above the finished floor level. When they arrive, our British Standard under-counter cupboards measure 900mm in height, including a 30mm scribe to the bottom of the legs and plinth.

Do you install upper or lower cabinets first?

Installing upper cabinets first allows better access for lifting the cabinets in place, whether you use extra manpower or special tools such as cabinet lifts. But installing lowers first can also have advantages. If floors are uneven, leveling the lowers first is important to establish uniform spacing for the uppers.

Should backsplash go past cabinets?

Run your kitchen backsplash between upper and lower cabinets. The backsplash connects the two sets of cabinets, which helps the room feel bigger and more cohesive. Do not put a backsplash behind your fridge unless you can clearly see that wall.

How much space should be between cabinet and wall?

The distance between the base cabinet (including kitchen countertops) and wall cabinet is normally between 18 and 20 inches. This is low enough to provide easy access to the wall cabinet contents for most people, and still have enough space to keep and use small appliances as well as use the workspace comfortably.

Do kitchen cabinets need to match trim?

Interiors Place recommends matching trim to kitchen cabinets in some instances, feeling that it looks best in more conventional homes with smaller, separate kitchens. Interiors Place advises homeowners that mixing trim colors work better in open-concept homes.

How tall should lower kitchen cabinets be?

Base Cabinet Height, Depth, and Width Height, without countertop 34 1/2 inches Height, with countertop 35 to 36 inches Depth (front to wall), without countertop 24 inches Depth, with countertop 25 to 26 inches Standard widths 12, 18, 24, 30, 33, 36, 48 inches.

What is the box above kitchen cabinets called?

Kitchen cabinet soffits are box-like structures built below the ceiling and above your cabinetry to hide the inner workings of your home, such as wiring and pipes. Soffits may also be used for purely aesthetic purposes to fill the space between the ceiling and kitchen cabinets.

What do you do with dead space above kitchen cabinets?

11 Smart Ways to Use the Space Above Your Cabinets Display serving pieces. Use canisters to conceal clutter. Or bust out the baskets. Show off a collection. Display cookbooks. Store your wine. Grow something. Add another shelf.

How thick is a countertop?

The industry standard thickness for kitchen, bathroom, and other countertop surfaces in natural stone is 1.25 inches. This thickness provides the strength and stability required to create an unbroken surface without the need for stabilizing it with a plywood backing.

Are kitchen soffits outdated?

Kitchen soffits are out of style, with fewer people retaining these fixtures in their homes and fewer still having them installed at all. Their outdated look often makes a room look smaller, and when building new kitchens, it’s better to free up that space for a bigger and brighter feel.