Table of Contents
What Is Code For Deck Railing Height? The IRC requires guardrails to be at least 36″ in height measured from the deck surface to the top of the rail. Commercial decks attached to multifamily buildings regulated under the International Building Code (IBC) require 42″ high guardrails.
What is the best deck railing height?
Deck stair railing should stand at least 34 inches high, measuring vertically from the nose of the stair tread to the top of the rail. The IRC specifies that deck stair railing should measure between 34 and 38 inches high, so homeowners may wish to use railing that is even higher than 34 inches for their deck stairs.
What is code for deck railing posts?
U.S. building code requires support posts for the rail structure to be no further apart than 6 feet on a deck with 4×4′ deck rail posts and no more than 8 feet apart for decks with 6×6′ deck rail posts. Posts should be no further apart than 5.5 feet on stairs.
How high is a railing supposed to be?
Handrails should be no less than 34 inches above the stair or ramp and no more than 38 inches above. If you are working with alternating tread devices or ship ladders, you should measure above the tread nosings. The handrail should be between 30-34 inches above.
How tall should a second story deck railing be?
Guard rails on second story decks ordinarily should not exceed a height of 42 inches or the minimum height required by local building codes, whichever is greater.
How far apart should balusters be on a deck?
Balusters are the vertical guards that support the handrail. They must be installed close enough that the space between them is less than 4 inches. Most city inspectors carry a 4-inch ball with them to test the spacing.
Can you notch a 4×4 deck railing post?
Say “No” to notching pressure-treated deck posts. We want you to build an outdoor railing system that you, your family and guests can enjoy without worrying about safety issues. In order to do so, you need to know this building shortcut is not advisable, and we recommend avoiding it at all costs.
Can I use 4×4 posts for my deck?
Deck posts must be a minimum of 4×4 according to the IRC but many jurisdictions require a 6×6 post as a standard. To avoid code violations, many deck builders choose the 6×6 even if the 4×4 is acceptable.
What is the standard height of a balcony railing?
The International Residential Code requires balcony railings to be 36 inches high for homes. For business or fencing use, the railings should be 42 or 48 inches. Each community has different height requirements to determine if the porch or balcony requires railings.
Does my deck need a railing?
If your deck is below 30 inches, a railing is not required. With that said, if you choose to build a deck, even if it is only 24 inches off the ground, that is still high enough that even an adult could injure themselves. When you take your kids and pets into account, the risk is even higher.
What is the maximum height of a deck without railing?
He’d made a point of building his deck so as to stay under the 30-inch requirement–which is the maximum deck height you can have without a railing.
How do you evenly space a deck spindle?
How to Evenly Space Spindles on Decks Measure the width of the gap between the inner surfaces of the two support posts. Measure the width of a single spindle. Add the two figures together. Count the number of spindles to be used and add one. Divide the sum of the width by the sum of the number of spindles.
What is the maximum gap between balusters?
U.S. building codes mandate that balusters have no more than a 4-inch gap between them. This relatively tight amount of spacing still allows for visibility between spindles, but also stands as a safety measure to prevent small children from becoming stuck between spindles or from slipping through the balusters.
How do you attach a railing to an existing deck?
After the decking is finished, it will be time to install the top and bottom rails, balusters, top cap and any other parts. Mark rail post centers. Mark for the exact position. Cut the post and tack a guide nail. Plumb and clamp the post. Drill holes for the bolts. Pound the bolts through.
How do you tie 2 4×4 posts together?
To connect 2 4x4s use a half-lap joint secured with construction adhesive, two steel plates, and four to six 1/2″ or 5/8” through bolts. Posts that support roofs or platforms should lap between 20” and 24”, other structures should connect for 6” to 10” along the centerline.
Can balusters be used in place of posts?
T/F: Balusters can be used in place of posts if there is adequate infill between them. T/F: End-grains of vertical posts and balusters should be cut level. Deck planking segments should bear on a minimum of _____ joists. T/F: Deck planking should be laid together as tightly as possible.
Should deck joists be 2×6 or 2×8?
In general terms, joists spaced 16 inches on center can span 1.5 times in feet their depth in inches. A 2×8 up to 12 feet; 2×10 to 15 feet and 2×12 to 18 feet. The larger the deck, the larger the joists. 2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards.
Can a 4×6 be used as a deck post?
While there may be a handful of circumstances that only require the minimum 4×4 deck post, you will more than likely want to choose a 6×6 post for the deck. It provides more stability for larger decks, the ability to hold a heavier load, and more room for notching.
How many posts are needed for a 10×10 deck?
An attached 10’x10′ deck needs 2 posts supporting a 2-ply non-incised 2×8 beam, upgrading the beam to 3-ply using incised wood. A freestanding 10′ x10′ deck needs 4 posts, supporting two pairs of 2-ply non-incised 2×8 beam, upgrading the beam to 3-ply using incised wood.
