Table of Contents
It’s probably about 22.5-25.5 inches from the ground to the top of the mattress (25 inches is typical for most standard beds). Choose a nightstand that’s approximately 23.5 inches high for the perfect fit.
Should a bedside table be higher or lower than the bed?
As a general rule of thumb, the top of your nightstand should be level with the top of your mattress, or about 2-4” taller. It’s much easier for somebody to reach above to grab something when they’re laying on the bed, as opposed to reaching below.
Can nightstands be shorter than bed?
RULE: 24”-27” is the ideal height for a nightstand but just keep the height 5″ higher or lower than the top of your mattress. Ideally, your nightstand will be around the exact same height as the top of your mattress so that you can easily access it.
Can bedside tables be lower than the bed?
Can nightstands be different heights? They absolutely can be different heights! Nightstand sellers need to be able to accommodate a variety of bed heights. The average height of a nightstand is 24”-28” inches, but they can be over 30”.
Should you have 2 bedside tables?
You really need two bedside tables if you want to balance the look and aesthetics of your room. A single bedside table can provide focus and accent to a room. Whereas two bedside tables that are of different styles can add a unique look to a bedroom.
How high is too high for mattress?
While the average bed height sits around 25 inches, if you prefer a bed with a fuller look or are tall yourself, you may prefer a bed around 30 inches off the ground. However, if your own height is below average, a 30-inch bed may be too high for you.
How far from the wall should a nightstand be?
Your bedside table should be within reach of your bed. Spacing in a room is important, so it should be at least one or two inches from the side of your bed, level with your mattress, or a few inches taller. However, it can be further depending on your reach and your personal design preferences.
Do nightstands have to be the same height?
First, think about the scale and height of nightstands in relation to the bed. And, while many people opt for matching nightstands, that’s not absolutely necessary. That’s the traditional approach, yes—but as with all design traditions, rules are meant to be broken!Oct 4, 2020.
Can side tables be higher than bed?
A nightstand can be higher than a bed, according to style experts. However, not just any height of nightstand that is higher than the bed will do, and it’s best to keep the difference in height no more than a few inches.
Can I have just one bedside table?
You are more than welcome to only have one bedside table, in fact, the choice is entirely yours. Stylistically bedrooms do tend to look chicer and more visually pleasing when they are styled symmetrically, however, if you have a smaller space or the need for only one bedside then choosing to go solo is more than fine.
How do I know what size bedside table to buy?
Upon determining the proper size of bed to purchase, you’ll then want to look into nightstand measurements. “The advice I give is that the height of the average bedside table should be between 24 and 28 inches in height, giving you 25 inches from the floor to the mattress,” Lau shared.
How high is an end table?
“End tables for living rooms are usually 25 to 30 inches tall, but the arm height of most sofas is 25 inches, which means most end tables are taller than the sofa arm,” he said.
How tall should bedroom lamps be compared to a headboard?
The bedside lamp should be 28″-30″ tall. Your lamps should look large enough to handle the bed and nightstands. It should be substantial. If you have a tall headboard, aim for the top of the lamp to cascade down slightly from the headboard.
Can I put my bed against the wall?
Feng shui — which considers spatial relationships in relation to the flow of life energy, or chi — usually would come out strongly in favor of pushing the bed up against the main wall of a bedroom. But it warns against doing so if there are bathroom drainage pipes or gas pipes running through the wall.
Why are American beds so high?
Why are American beds so high? – Quora. There are two things: the height of the bedframe and thickness of the boxspring/mattress assembly. The taller bed height was simply style. Some of it can be traced back to the sumptuous, over done styles of the 1980’s, where everything was bigger, taller, grander than before.
Is 32 inches too high for a bed?
A comfortable total-bed maximum height is 33 inches. A range of 30 to 32 inches for sleeping height makes a visually attractive design statement, supports a traditional theme as well as allows under-bed storage. A high-bed strategy is the largest option for mattress heights.
How do you get into a bed that is too high?
Use Steps Or Risers to Get in Bed You can build or purchase steps or risers for your tall bed. This option does not exactly lower your bed frame, but it makes it easier to get in bed if your bed frame is too tall. This option prevents you from having to jump or strain yourself getting in bed each day.
