Table of Contents
It’s probably about 22.5-25.5 inches from the ground to the top of the mattress (25 inches is typical for most standard beds). Choose a nightstand that’s approximately 23.5 inches high for the perfect fit.
Should a bedside table be higher or lower than the bed?
As a general rule of thumb, the top of your nightstand should be level with the top of your mattress, or about 2-4” taller. It’s much easier for somebody to reach above to grab something when they’re laying on the bed, as opposed to reaching below.
Can bedside tables be lower than the bed?
Can nightstands be different heights? They absolutely can be different heights! Nightstand sellers need to be able to accommodate a variety of bed heights. The average height of a nightstand is 24”-28” inches, but they can be over 30”.
Should you have 2 bedside tables?
You really need two bedside tables if you want to balance the look and aesthetics of your room. A single bedside table can provide focus and accent to a room. Whereas two bedside tables that are of different styles can add a unique look to a bedroom.
How high is too high for mattress?
While the average bed height sits around 25 inches, if you prefer a bed with a fuller look or are tall yourself, you may prefer a bed around 30 inches off the ground. However, if your own height is below average, a 30-inch bed may be too high for you.
Should nightstand be shorter than bed?
RULE: 24”-27” is the ideal height for a nightstand but just keep the height 5″ higher or lower than the top of your mattress. Ideally, your nightstand will be around the exact same height as the top of your mattress so that you can easily access it.
Can I have just one bedside table?
You are more than welcome to only have one bedside table, in fact, the choice is entirely yours. Stylistically bedrooms do tend to look chicer and more visually pleasing when they are styled symmetrically, however, if you have a smaller space or the need for only one bedside then choosing to go solo is more than fine.
What is the average size of a bedside table?
An average nightstand measures around 20″ wide and 20″ deep. The height of the nightstand should be equal — or close to — the height of your bed frame and mattress so that the pieces align properly.
How high is an end table?
“End tables for living rooms are usually 25 to 30 inches tall, but the arm height of most sofas is 25 inches, which means most end tables are taller than the sofa arm,” he said.
How far should a nightstand be from the bed?
Your bedside table should be within reach of your bed. Spacing in a room is important, so it should be at least one or two inches from the side of your bed, level with your mattress, or a few inches taller. However, it can be further depending on your reach and your personal design preferences.
Do nightstands have to be the same height?
First, think about the scale and height of nightstands in relation to the bed. And, while many people opt for matching nightstands, that’s not absolutely necessary. That’s the traditional approach, yes—but as with all design traditions, rules are meant to be broken!Oct 4, 2020.
Is 32 inches too high for a bed?
A comfortable total-bed maximum height is 33 inches. A range of 30 to 32 inches for sleeping height makes a visually attractive design statement, supports a traditional theme as well as allows under-bed storage. A high-bed strategy is the largest option for mattress heights.
How high should a bed be for an elderly person?
The Disability Rights Education and Defense Fund recommends beds should be 20 to 23 inches high from the floor to the top of the mattress. Before getting out of bed, sit on the edge of the bed with both feet flat on the floor.
Why are American beds so high?
Why are American beds so high? – Quora. There are two things: the height of the bedframe and thickness of the boxspring/mattress assembly. The taller bed height was simply style. Some of it can be traced back to the sumptuous, over done styles of the 1980’s, where everything was bigger, taller, grander than before.
How do you raise a bedside table?
There are several different ways that you can raise a nightstand or lower your bedframe.Raise the Nightstand Add something on top to make your nightstand higher. Use furniture risers on the bottom of your nightstand. Use a piece of furniture to raise the nightstand. Pay a carpenter to raise it however you like.
Can side tables be higher than bed?
A nightstand can be higher than a bed, according to style experts. However, not just any height of nightstand that is higher than the bed will do, and it’s best to keep the difference in height no more than a few inches.
How big can bedside tables be?
Nightstand sizes depend on the space of a bedroom and the size of the bed frame. Standard nightstands are typically 21″ – 29″ wide and pair well with queen- or full-sized beds. Twin-sized beds look best with a narrower silhouette. For large king-sized beds, opt for a wider nightstand to match the scale.
How wide should a nightstand be for a queen bed?
NIGHTSTAND WIDTH & DEPTH Queen beds: 22″ to 24″ x 23″ to 27″ is a great size range for nightstands paired with a queen bed. King bed: 23″ to 25″ and larger width and depth will work well with you king size bed.
How tall should my dresser be?
A standard dresser has between six and nine drawers, is around waist tall (26″ – 44″), is 36″ – 60″ wide, and is 16″ – 20″ deep. However, these can vary and you should choose an option that works best in your bedroom.
