Table of Contents
Recessed lighting is easiest to install during new construction but can be retrofitted into existing ceilings. Just look for recessed lights designed to fit through a small hole in the ceiling and mounted to the drywall with clips instead of the joists and strapping.
Do you need an electrician to install recessed lighting?
Yes, you need (sic) to hire a licensed electrican to install recessed lights in a ceiling. Yes, a person with good knowledge and experience in electrical work is able to preform the work.
Is it worth installing recessed lighting?
Recessed lighting definitely has some great advantages that make it a great choice for your next lighting installation. The simple fact that the lights are built straight into the ceiling make them an effective application for any room or space with low clearance.
How much does it cost to have someone install recessed lighting?
Expect to pay between $100 to $480 per fixture, or $360 on average, when having recessed lighting installed by a pro. At the average price, the project runs about $2,160 for six fixtures. The total varies depending on the type of housing, trim, and bulbs you select.
Can I add recessed lighting myself?
If you have a nearby power source, you can easily install recessed lights by yourself. Bringing in a power source adds some time to the project, but this can be accomplished by wiring your own circuit or hiring an electrician.
Why is recessed lighting bad?
Used properly, recessed lights are sleek, unobtrusive fixtures that can be good problem-solvers. Used improperly, they can waste electricity, provide poor lighting and cause your heating and cooling bills to go up. Kitchens are common places where recessed lighting fixtures are used.
Is installing recessed lighting easy?
Recessed lighting is easiest to install during new construction but can be retrofitted into existing ceilings. Because recessed lighting is installed in the ceiling, it’s simplest to put in before ceiling material goes up—during new construction or a major renovation.
How much does it cost for an electrician to install recessed lighting?
The cost for an electrician to install recessed can or canless LED lights will generally be between $200 and $250 per fixture. Professionals charge at a rate of $85 to $105 per hour and each installation takes approximately 2 to 2.5 hours.
What is the difference between can lights and recessed lights?
Recessed lights, also known as can lights, are described as metal light housings installed in the ceiling for a sleek look that gives you back your ceiling.
Does recessed lighting use more electricity?
Recessed lighting does use more electricity. The amount of electricity (kWh) consumed by recessed lighting is up to 90 kWh per day which is 2,700 kWh per month. This is in reference to recessed lighting with fluorescent lightbulbs. Typical electrical costs differ depending on where you live.
Does adding recessed lighting add value to a house?
Does recessed lighting add home value? Recessed lighting can absolutely add home value of you take the time to place them correctly and use the right light temperature for the room. There are also ways to make recessed lighting more energy efficient which is not a bad additional benefit.
Are canned lights out of style?
Recessed lighting will never go out of style. However, the finishes and sizes will vary and change as time goes by. There are too many advantages of having the lighting recessed for them to eventually go out of style or phase out.
Can you add recessed lighting to existing ceiling?
Thinking about adding recessed lights or pot lights but don’t want to tear out your whole ceiling to do it? Luckily you don’t have to. With a little ingenuity and special remodeling housings, you can install a roomful of recessed lights or canister lights with minimal drywall tear-out and patching.
How far apart should recessed lights be?
A good general rule for placement is to divide the height of the ceiling by two. The result is the amount of space to leave between each light. For example, recessed lighting spacing for an 8-foot-high ceiling would be 4 feet between each light. This will provide good spacing for general room lighting.
How many can lights for a 12×12 room?
The typical rule-of-thumb is 24″ from each wall, and then 3-5 feet between cans. So in a 12′ room you’d probably want two rows of lights. Considering it is a bedroom and you don’t need it as bright as a kitchen, you can probably get away with 2 rows of 4 lights for a total of 8.
Do LED recessed lights get hot?
Answer: While LEDs run much cooler than incandescents, their electronic components and external heat sinks do get quite hot; you would still need to keep the insulation away from your fixtures. You could hire an electrician to replace each fixture with a sealed one rated for insulation contact (IC).
How many recessed lights can you put on one switch?
The main limitation on the number of recessed lights that a single switch can control is the rating of the circuit breaker controlling the circuit. Each incandescent or halogen 60-watt bulb draws around 1/2 amp, and therefore, standard lighting with a 15amp breaker can manage 30 lights.
How long does it take to install recessed lighting?
Installing recessed lighting is fairly simple and should only take between 2-4 hours, depending on how many lighting fixtures you need.
How do you calculate how many recessed lights are needed?
Formula: total sq. footage x 1.5 = total wattage needed. Total wattage divided by 60 watts (or whichever wattage you select) = total amount of recessed can lights. Example: 240 square foot room x 1.5 = 360 divided by 60 (the bulb wattage I’d like to use) = 6 recessed lights needed.
What size recessed light for 8ft ceiling?
When spacing recessed lights, use this general rule of thumb: divide the height of the ceiling by two to get the distance the lights should be from one another. For example, an 8-foot tall ceiling should have recessed lights spaced 4-feet apart.
