Table of Contents
How far in should a table apron be?
Space available for apron is limited. Apron height of 2″-3″ is typical. Balance the need to support end of table with clearance for feet. 10″-12″ minimum, 16″-18″ ideal.
How much should a farmhouse table overhang?
This blog post may help you with general table sizing. Here’s the hard math: With a farmhouse table the top overhangs approx. 2″ on each end, the apron is approx. 1.5″ thick on each end, and each leg is approx.
How much should a tabletop overhang?
Table top overhangs of 2 to 4 inches are quite standard, and give a proportional look to the table. However, some people prefer the look of a shorter overhang. There is no right or wrong in most cases–just make sure you are comfortable with the overhang amount that you choose.
How thick should a farmhouse table top be?
Transitional styles vary greatly, but typically favor table top thicknesses in the mid-range, from 1″ to 1 ¾”. Not excessively thick or thin, but well-proportioned to the interior space. Larger, more rustic pieces may work well with a thicker top.
How do you size a table apron?
My old rule of thumb with typical dining or writing table dimensions was to put the bottom of the apron a minimum of 24 inches off the floor. If your top is, say, 1-1/4 in. thick, you could have a 5″ apron and still have 24″ to the floor for knees.
How much overhang should a coffee table have?
The top should overhang the frame by 1 3/8 inches on the front and back trims and two inches over the end trims.
How much legroom do you need under a table?
Provide about 24″ of leg room below the table (height from floor to bottom of table rail) and at least 12″ for knee clearance (projection of table top beyond table leg). In figuring seating capacity, allow at least 24″ of elbow room width per person and 12″ to 15″ depth from the edge of the table.
How far from the edge of a table should the legs be?
For dining tables, position your legs 16-20” from the end of the table to allow for seating someone on the end. Mark all of your mounting holes with the legs in place.
How far from the edge should your legs be from the table?
The ideal distance from the edge of the table is 2 inches. Keep all four corners consistent to ensure a sturdy mount.
How much clearance do you need around a dining table?
Dining Table Clearance. No matter what shape your table is, leave at least 30 inches (76cm) between the edge of the table and an obstruction (wall or sideboard – or anything else) to allow people to take their seats. With 30 inches it will still be very tight if people get up in the middle of the meal.
Can I use 1×6 for table top?
Consider building your tabletop out of boards about 6″ wide (1×6 or 2×6), or close in size (I use x4 and x8 boards on occasion). If you go smaller, you’ll be adding more joints, which means more pocket holes and more sanding.
How thick should a dinner table be?
Most tables look good with a top thickness dimensions in the ¾” to 1″ range. For a more informal table with a country feel, especially with larger legs I will sometimes go with a thickness up to 1¼”. Overhang is how much the top projects out over the base. Four inches along the sides and ends is a safe dimension.
How thick should a hardwood table top be?
Wood is priced by volume. 2” thick slabs will generally yield a top finished to 1 ½” to 1 ¾” thick. That’s plenty for most tables. If you do want a thicker top, just be aware that the extra bulk is increasing your costs.
What is the apron of a dining table?
Table aprons, (also called table skirts or skirting) are wood extensions that sit right below the surface of the table. Picture your table top and the part that hangs down from it. This is the table’s “apron” or “skirt.” Aprons can range from 1 ½” to 3”.
How far in should legs be on coffee table?
For a coffee table, the ideal cleat length is 3” to 6” shorter than the width of your table top. For an end table, the appropriate cleat length is 7” to 10” less than the width of the table top. For a dining table, select a cleat anywhere from 6” to 12” shorter than the width of the table top.
What are the average dimensions of a coffee table?
54″ Long: A fairly standard length for coffee tables, 54″ in length, and anywhere from 20-30″ wide (or deep) is a good size for larger living rooms. 60″+ Long: If the room is large enough for multiple chairs and a sofa, you’re probably better off with at least a 60″ coffee table.
How do you size a coffee table?
Specifically, your coffee table should be approximately two-thirds the length of your sofa. So for a 96-inch sofa, for instance, you should look for a coffee table that’s 64 inches long.
How much space should be between seat and bottom of table?
How much space between your chair and the table? For optimal leg room, allow 10-12 inches between the seat of your chair and your underside tabletop. Tip: For armchairs, be sure to leave to leave at least six inches between the armrest and the underside of the table.
How much room do you need under counter seating?
The recommended counter overhang also varies with the counter height, with experts suggesting 15 to 18 inches for the lower counter and 12 inches for a raised counter. Whatever height counter you have and whichever kind of seating, allow at least 24 inches of space between each seat for your guests’ comfort.
How much space do you need under island for seating?
If there is no walkway behind the island or peninsula, the National Kitchen and Bath Association (NKBA) recommends a minimum of 32″ of clearance space between the edge of the countertop or table to any wall or other obstruction behind the seating area.
How many legs should a table have?
It usually has four legs. However, some tables have three legs, use a single heavy pedestal, or are attached to a wall.
