Table of Contents
How High to Hang Curtains. A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.
How far should a curtain rod extend beyond the window frame?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
How much wider should curtains be than the window?
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.
How far should curtain brackets be from window?
The curtain brackets should be placed about 6 inches from the outside edge of the window frame to allow plenty of natural light.
How far should curtains overhang?
General Installation Recommendations. When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side. This allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.
Where should I place my curtain rod?
DO Hang High The higher the curtain rod, the taller the window will appear, so fix your curtain rod closer to the ceiling than the top of your window, if you can. One rule of thumb is that they should sit 4-6 inches above the window frame.
How wide should curtains be for a 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How wide should curtains be for 48 inch window?
Curtain Width Guide If you hang a 48-inch panel on a 48-inch window, there will be no fullness or draping. According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across.
Which side of curtains should be inside on door?
But the fabric side (also described as the woven or rough side) is made to face the window because of the durability. Face the fabric side out to avoid yellowing or sun damage, which will preserve the lifespan of your curtains.
How should curtains look from the outside?
How to Make Your Curtains Look Good from the Outside Use Transparent Glass for Your Windows. Opt for More Noticeable or Bold Patterns. Make Sure that Your Curtains Create a Good Contrast. Declutter the External Area Around the Window. Keep the Curtains Clean and Tidy.
How high should you hang curtains with 8 foot ceiling?
How High to Hang Curtains 8 Foot Ceiling. An 8 foot ceiling is pretty standard for a residential home. With this standard height will be safe to put the rod about 6 inches above the top of the framing of the window. This avoids any extra framing and gives space between the frame and the rod.
How many curtains do I need for a 72 inch window?
Example: If your window measures 36″ wide (window width x 2 = 72″), you need curtains that will give a minimum width of 72″ or 2 panels for that window. In this case 2 panels will give about 100″ to 120″ of width which will look nice and full. Always round up to the next full number.
How wide should curtains be for 60 inch window?
For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers. Therefore, for a 60 inch window, you need two panels of 60 inches each for twice the width and a luxurious gather.
How long curtains should be?
How Long Should Curtains Be? Floor-length is the way to go, unless there’s a radiator or a deep sill in the way. Ready-made panels are available in lengths from 63 to 144 inches. Measure from the floor to where you’ll hang the rod, then round up.
Do you double the width for curtains?
The actual amount of gather depends on heading styles and personal preference, but as a general rule the width of your curtains should amount to double the width of your track. This is referred to as ‘two times gather’.
How do you measure yardage for curtains?
Yardage Fabric Calculator-Drapes For Standard Width Panels: Finished length of curtains + 16 inches divided by 36 = number of yards required. Add 1 extra yard (or one vertical repeat of the fabric) per pair if using a large print fabric.
Is the width of curtains per curtain?
Width: When we list or write curtain measurements, the width always comes before the drop. The width measurement actually refers to the width of each curtain in the pair, as you need double the width of your track or pole in curtaining for the gathered effect.
Are 84 inch curtains long enough?
Standard curtains come in three lengths—84 inches, 96 inches, or 108 inches. “Generally, you want to stay away from the 84 inch standard curtains unless you have very low ceilings. They don’t look right in most scenarios and end up being an awkward length,” says Curtis.
How wide should curtains be for a 120 inch window?
For a 120-inch window, how wide should curtains be? Depending on the weight of the fabric and how much you want the curtains to be. At least a width and a half is what I would recommend. 180 inches is the width of each curtain.
How wide should curtains be for a 43 inch window?
Curtain widths should typically be about 1 1/2 to 3 times the final width measurement of your window. However, the fullness you choose will ultimately define the style you want to achieve.
