Table of Contents
For a single rod application, plan 60-inches from the floor for placement. You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging. When spanning an opening of more than 48-inches, consider adding a center support to the closet rod for added stability.
What is the standard height for a closet rod and shelf?
Generally, a closet shelf is about 87 inches above the floor, and a single closet rod is mounted at around 72 inches in height. These numbers are not carved in stone, however, and you can create designs and modifications that work for you.
How much space do you need for a hanger?
A hanger is 18 inches wide, the width of an average man’s shoulders, and the garment needs breathing space. Allow 36 inches from the top of a clothing rod to the top of another clothing rod when creating double hanging space.
What is the depth of a closet rod?
Opt for a closet rod depth of at least 12 inches. You can avoid this clothing disaster by mounting the rod at least 12 inches from the rear wall of the closet. Keep in mind that the average closet has a depth of 24 inches.
How wide should a closet shelf be?
The comfortable recommended depth of a closet is 24” (61 cm), but closet depths as narrow as 20” (50.8 cm) can be used if desired. Shelf depths of 12” (30.5 cm) should be used for shoes and smaller clothing elements.
How much clearance do you need between closet rod and shelf?
A minimum of 10 inches is best, but it’ll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.
How long can closet rods go without support?
If your closet rod is longer than 48 inches, you will need support. However, regardless of how long the closet rod is, if you’re hanging heavier items such as winter jackets, then you will want support no matter what.
What is the best depth for a closet?
A clothes closet should have a minimum depth of at least 24 inches deep, so the clothes can clear the back wall.
How shallow can a closet be?
The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn’t deep enough to allow hanging clothes.
How do you support a closet rod?
Before installing a closet rod, it is best to place closet brackets in a position on the wall that allows for the most support. This will require a stud finder. Once wall studs have been located, closet rods and brackets can be screwed into the stud for optimal support.
How much weight can a wooden closet rod hold?
Never put more than 25-pounds of clothing on one of these rods or it will fail. The motorized version works with a remote control and can hold up to 60-pounds of clothing per rod.
How deep should wall shelves be?
As far as shelf size, a depth of 10 or 12 inches fits most functions without concern of drooping in the middle, while length should be determined based on where you want to install yours. If you want a long span but are concerned about weight, install adjacent, identical floating shelves, or opt for bracket supports.
How much space should be between shelves?
The rule of thumb for spacing is 12 inches between each shelf but bump that up to 15 or 18 inches and you enhance that sense of exposure and accessibility. Length is where you’ll see the most variation.
How far apart should Shelves be?
At the very minimum, your shelves should be at least 12 inches apart. However there are exceptions, depending on the use. It can range from 8″ to 16″. Again, I used the level to make sure it was straight.
What is maximum length for closet rod?
The maximum pole length is 36″, and the maximum length for a continuous shelf is 40″. Your design consultant can recommend the best design to accommodate any space, no matter how wide, by combining our products to optimize your space.
Is 18 deep enough for a closet?
The standard closet depth in the U.S. is 24 inches or 61 cm, but you can also opt for a narrower closet depth of 20 inches if desired. Drawers for folded clothes, on the other hand, should have a minimum depth of 18 inches or 45.7 cm, while deep drawers can follow the standard closet depth, which is 24 inches or 61 cm.
How high should clothes rod be?
As a rule, place the top rod 80 to 82-inches up from the floor and the bottom rod about 40-inches up from the floor. For a single rod application, plan 60-inches from the floor for placement. You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging.
How small can a bedroom closet be?
Minimum Closet Size Standards and Dimensions. Minimum walk-in bedroom or walk-in coat closet: 4’D x 4’W. The minimum for a walk-in pantry or linen closet: 32″D x 32″W. Minimum reach-in bedroom or reach-in coat closet: 22″D (standard reach-in closet depth is 24″) x 36″W.
What do you do with a shallow closet?
10 Ways to Squeeze a Little Extra Storage Out of a Small Closet Double your available hanging space by adding an extender rod. Store clothes on shelves more efficiently with shelf dividers. Double your shelf space with under shelf baskets. Hooks are your very best friend.
How do you maximize a hanging space in a closet?
If most of your clothes are short hanging, add an extra closet rod to instantly double the amount of hanging space. Add-on, cascading and slim profile hangers are other good ways to save space. Finally, give yourself the benefit of drawers in your closet by using hanging sweater and hanging shoe organizers.
How do you install a closet rod in drywall?
To securely install a closet rod in drywall: Measure the size of the space where the closet rod will go. Buy a closet dowel rod and cut it to length. Choose a wall bracket that can be positioned so that you can screw it into wall studs. Mark the place where your first bracket will be installed. Drill pilot holes.
What is standard shelf height?
For ease of shelf access, bookcases are generally no higher than 84 inches. Small bookcases are usually 30 to 42 inches high. The highest shelf in a bookcase should be as high as an average-sized person can comfortably reach – about 72 to 78 inches.Contact Us. Species Modulus of Elasticity (E) Western Red Cedar 1.12.
Does a closet rod have to be in a stud?
Basic Installation It should be placed in front of a stud so you can screw into the stud to give it support. The typical height of a closet rod is from 60 to 80 inches, and both brackets should be at the same height, or the hooks you hang from the rod will slide to one end.
How far apart are studs?
The general spacing for wall studs is 16 inches on center, but they can be 24 inches. At my home, the exterior wall studs are spaced at 24-inch centers, but the interior walls are 16 inches on center.
Do closet walls have studs?
Closet shelves are usually anchored to the wall where the mounting screws can grab wall studs. If your walls are masonry, you likely don’t have studs at all. You’ll need the proper materials and methods to build a stud-free closet shelf.
