Table of Contents
As a rule, place the top rod 80 to 82-inches up from the floor and the bottom rod about 40-inches up from the floor. For a single rod application, plan 60-inches from the floor for placement. You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging.
How much space do you need to hang clothes?
Shelves for folded clothes should be placed around 12 inches apart. 84 inches is considered the minimum height to hold double hanging rods. Blouses and shirts will take up about 1 inch of rod space, pants and skirts around 1 1/4 inches and dresses, jackets and suits about 2 to 3 inches.
How wide does a closet need to be to hang clothes on both sides?
The short answer: If you want hanging clothes on both sides, you need at least a full 6′ wide space. Any less and people will have a really hard time maneuvering in the space.
How much clearance do you need between closet rod and shelf?
A minimum of 10 inches is best, but it’ll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.
How long can closet rods go without support?
If your closet rod is longer than 48 inches, you will need support. However, regardless of how long the closet rod is, if you’re hanging heavier items such as winter jackets, then you will want support no matter what.
How do you support a closet rod?
Before installing a closet rod, it is best to place closet brackets in a position on the wall that allows for the most support. This will require a stud finder. Once wall studs have been located, closet rods and brackets can be screwed into the stud for optimal support.
How much weight can a wooden closet rod hold?
Never put more than 25-pounds of clothing on one of these rods or it will fail. The motorized version works with a remote control and can hold up to 60-pounds of clothing per rod.
How wide should a master closet be?
A walk-in master closet should be a minimum of 7-by-10 feet, and preferably 100 sq. ft. for two users. That gives you space to line two or three walls with shelves, cubbies, and poles, and the elbow room to reach them easily.
What is depth of closet?
The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn’t deep enough to allow hanging clothes.
How much space do you need around a closet Island?
Closet islands are usually relegated to larger walk-in closets. You need to leave about 36-inches of open space on all sides of the island. Therefore, you are probably looking at a minimum closet size of 10 feet by 10 feet. The type of island you can have in your closet will also be determined by the size of the space.
How much space should be between shelves?
The rule of thumb for spacing is 12 inches between each shelf but bump that up to 15 or 18 inches and you enhance that sense of exposure and accessibility. Length is where you’ll see the most variation.
How far apart should shelves be?
At the very minimum, your shelves should be at least 12 inches apart. However there are exceptions, depending on the use. It can range from 8″ to 16″. Again, I used the level to make sure it was straight.
How do you measure a closet rod?
First, position your tape measure horizontally, and measure 12 inches from the rear wall. This marks the ideal depth of the closet rod. Next, you’ll want measure 66 inches from the ground upward, which marks the ideal closet rod height.
What is the average hanging space per person?
Aim for a minimum of 2.4m of wall space per person (without additional bedroom furniture). Allocate 600mm for the widest items you wish to hang, plus an extra 100mm for easy viewing. You’ll need a corridor of at least 800mm as your ‘walk-in’ space.
How do I get more close space in my closet?
10 Ways to Squeeze a Little Extra Storage Out of a Small Closet Double your available hanging space by adding an extender rod. Store clothes on shelves more efficiently with shelf dividers. Double your shelf space with under shelf baskets. Hooks are your very best friend.
How do you maximize a hanging space in a closet?
If most of your clothes are short hanging, add an extra closet rod to instantly double the amount of hanging space. Add-on, cascading and slim profile hangers are other good ways to save space. Finally, give yourself the benefit of drawers in your closet by using hanging sweater and hanging shoe organizers.
Do closet rods need studs?
Drywall is thin and cannot hold the weight of a loaded closet rod on its own. The key to proper closet rod installation is using wall studs when possible to support your brackets. This ensures that the load of the closet rod isn’t on the drywall but is instead on solid wood.
Does a closet rod have to be in a stud?
Basic Installation It should be placed in front of a stud so you can screw into the stud to give it support. The typical height of a closet rod is from 60 to 80 inches, and both brackets should be at the same height, or the hooks you hang from the rod will slide to one end.
How far apart are studs?
The general spacing for wall studs is 16 inches on center, but they can be 24 inches. At my home, the exterior wall studs are spaced at 24-inch centers, but the interior walls are 16 inches on center.
How much weight should a closet rod support?
Aluminum Anodized Elite 1-5/16”: Up to 80 lbs. Stainless Steel 1-1/16”: Up to 95 lbs. Steel Polished Chrome Round 1-1/16”: Up to 110 lbs. Steel Polished Chrome Round 1-5/16”: Up to 170 lbs.
How much weight can the shelf in my closet hold?
For their closet shelving, you can typically expect to hold around 35 pounds per linear foot, unless you get the shelving with the ShelfTrack Hardware. Then, you can hold a very respectable 75 pounds per linear foot. If you get their Maximum Load Standard Shelving, you can expect to carry up to 600 pounds per unit.
How much weight can Rubbermaid shelving hold?
Total Weight Capacity: 350 lbs.
