Table of Contents
Should I use 2X8 or 2X10 for pergola?
Most builders use a minimum of 2×8 for the upper framing members, and that’s for a small pergola. On this pergola, the builder Ricky Chavez used 2×12 for the girders, 2×10 for the rafters, and 2×4 for a layer of decorative purlins fastened atop the rafters.
How far can a pergola beam span?
There’s not quite enough information here to give a definitive answer, but for decks, a rule of thumb is when supporting joists that span 12 feet, a double ply beam can span in feet a value equal to its depth in inches. Thus, a double 2×12 beam could span 12 feet – with 20′ beams, posts at 10′ might look the best.
How far can a 2X8 span for a pergola?
The IRC 2018 does not specify a maximum span for pergola beams. Because of this, it is best to go by the standard rule and multiply the depth by 1.5. This would give you 12 feet. You may be able to get away with another 1 to 2 feet depending on the species and grade of the wood but should avoid going past that.
How far can a 2X10 span between posts?
The length of one 2×10 joist span depends on the wood species and how far apart it is from the next 2×10. A 2×10 southern yellow pine joist can span 16 feet and 1 inch without support. A doubled 2×10 beam can span 11′ without support for a deck that is 4′ wide.
How far can a 2×8 span without support?
Based on different manufacturers’ specifications, the maximum span a 2×8 LVL is from 12′ to 15′. Spans are also affected by the species of wood used in the manufacture of the laminated joists, with western woods edging out eastern woods in unsupported span distance.
What is the maximum distance between pergola posts?
To shorten the span, install two additional posts to bring the centre distance to around a maximum of 10′ (less if possible). So for this particular pergola we’d need to position posts at 5′ in from the outside posts, giving the two 5′ spaces and a 10′ space in the middle.
How big of a beam do I need to span 20 feet?
Wood beam size for a 20 foot span:- as per general thumb rule, for a 20 foot span, size of wood beam or lumber joist should be 2×14 which placed at 16″ apart from centre used for residential building or projects or construction in which depth of section of beam is 350mm (14″) and width of beam is 50 mm or 2″.
What size beam do I need for an 18 foot span?
What size lvl beam for a 18 foot span:- as per general thumb rule, for a 18 foot span, size of LVL beam or GLULAM should be 9 to 10 inches deep and 3 inches wide, thus you need something like a 9-10″ GLULAM or LVL to span upto 18 feet and can use simple 2×12 dimensional lumber at 16″ apart from centre as floor joists.
How far can I span 2X12?
A 2×12 with an E of 800,000 psi and Fb of 790 psi also works, since it can span 15 feet and 10 inches. Given a design span of 15 feet 1 inch and a 16 inch joist spacing, first determine which size lumber will work.
How far can a triple 2×10 header span?
How Far Can a Triple 2×10 Beam Span? A triple #2 – 2×10 beam of Southern pine can span between 7′-6” and 13′-0” with a live load of 40PSF depending on the joist span. Using DF-L, Hem-Fir, or SPF and the span changes to 7′-2” and 12’6” under the same conditions.
What size beam do I need to span 16 feet?
Wood beam size for a 16 foot span:- as per general thumb rule, for a 16 foot span, size of wood beam or lumber joist should be 2×10 which placed at 16″ apart from centre used for residential building or projects or construction in which depth of section of beam is 250mm (10″) and width of beam is 50 mm or 2″.
What size timber do I need for a pergola?
For the uprights you will need at least 75mm x 75mm (3” x 3”) timber, and 100mm x 100mm (4” x 4”) is better if it is to be a sizeable structure. The uprights need to be around 3m (10ft) long, as they will need sinking into the ground by 0.5m (2ft) to give a firm foundation.
How far can a 2×10 joist span?
Douglas fir 2-by-10 joists graded as “Structural Select” allows joist spans up to 21 feet for a live load of 30 pounds per square foot when spaced 12 inches apart, 19 feet 1 inch for 16 inch spacing and 16 feet 8 inches for 24 inch spacing.
How much weight can a 2X10 hold?
Each 2×10 will support 1,200 lbs.
What size lumber can span 13 feet?
A 2×6 spaced 16 inches apart can span a maximum distance of 13 feet 5 inches when used as a rafter, 10 feet 9 inches when used as a joist, and 6 feet 11 inches when used as a deck beam to support joists with a 6-foot span. What is this?.
How far can a 8X8 beam span?
From contributor I: 20 to 25 feet is a serious span – an 8X8 won’t even come close.
