Table of Contents
Generally, grommets are spaced about 6 inches apart on center. The first and last grommet are inset the space needed for the return to the wall, and in front of the window at the leading edge.
How do you measure a grommet placement?
Using a ruler, mark the center position of each grommet on the back of the curtain. For large grommets, the center position should be 21⁄4″ from the top of the curtain. For medium grommets, the center position should be 2″ from the top of the curtain. 6.
How do you measure for grommets in curtains?
How to Measure: Grommet Top Curtains Measure from where you’d like your rod installed to where you want the curtain to fall. Measure grommet panel length from the very top of the curtain (not the top of the grommet) to the bottom. The grommet is set down about 1″ from the top of the panel.
How do you keep grommet curtains evenly spaced?
Grommet panels fall into gentle pleats when in the open position, but each pleat must be adjusted every time the drape is closed. To keep them in place requires a small sleight-of-hand trick from a drapery workroom that allows you to open and close the drapes with the pleats remaining even and adjustment free.
How far apart do you place grommets?
Generally, grommets are spaced about 6 inches apart on center. The first and last grommet are inset the space needed for the return to the wall, and in front of the window at the leading edge. If there is a window frame, blinds or shades on the window, you will want the spacing to clear what is behind the rod.
How far from the edge should grommets be?
Spacing Formula and Layout Measure and mark the center of your curtain panel and mark the spacing of your grommets before you start cutting the fabric to be sure you like the spacing and to make sure there is enough room, at least two inches, from the edge of your curtain to the center of the nearest grommet.
What is the standard size for grommets in curtains?
Keep in mind that the standard length of grommet panels is 84”, although longer lengths are also available.
How large are grommets in curtains?
We offer two sizes (2-inch and 1-9/16-inch) of metal curtain grommets in four colors: nickel, black, brass and antique finish. Metal curtain grommets are suitable for any weight of curtain fabric.
How do you adjust grommet curtains?
Step-by-Step Instructions: Grommet Curtains to Pleated Drapes Step 1: Fold grommets down at top seam. Step Two: Attach curtain clip rings. Step Three: Hang drapes on curtain rod. Step Four: Create crisp pleats from the folds.
How do you calculate fabric for eyelet curtains?
For eyelet curtains you need between 1.5 times fullness (adequate) and 2.25 times fullness (maximum). You will need to make sure you have an even number of eyelets on your finished curtains.
How much fullness do you need for eyelet curtains?
– An eyelet curtain will usually have 2 x fullness = 100% of the track width. – A pinch pleat curtain requires more fabric to sew in the pleats as it gathers up tighter. As such you will require 2.5x the track width or 150% fullness.
How do you measure for eyelet curtains?
To work out the length (drop) for your new eyelet curtains. you will need to hold the tape measure at the top edge of the curtain pole. Then measure down to where you want the eyelet curtains to finish. That will be either to just at the window sill or a few inches past the window sill.
How many grommets do I need for a shower curtain?
Standard shower curtains are 72” square with twelve grommets or buttonholes across the top to correspond to the hook placement in the accompanying vinyl liner. Measure your tub or shower to be sure this size works for you and adjust as needed to fit.
How do you put grommets in curtains?
Add Grommets Add Grommets. Debbie Wolfe. Place the raised center of each grommet in the hole from the front of the curtain. On the back of the curtain, position the prong side of the grommet over the raised center and press down to secure. prev. next. Hang. Slip the rings onto a curtain rod and enjoy your new look.
How many grommets does a tarp have?
The kit contains (24) size 2, brass grommets, a cutting block, a hole cutter and an inserting punch with die. with plain washers. These size 2 grommets have a 0.375″ or 3./8″ diameter hole. This grommet setting kit is used for light duty repair work.
What is the difference between an eyelet and a grommet?
An eyelet is a small piece of metal that is used to reinforce a hole in a piece of fabric; usually made of brass. Grommets are very similar to eyelets, because they are used to reinforce a hole as well; however, grommets are typically used for more heavy duty material than eyelets.
What size curtain rod do you use with grommet curtains?
Sizing. A grommet that is 1/4 inch larger than the rod diameter slides smoothly along the rod. For example, a common 1 5/8-inch grommet glides over a 1 3/8-inch diameter rod.
What is a #12 grommet?
*Micron #12 Grommets are made from Heavy-Duty Brass and will not rust. They feature a 1 9/16″ inside diameter (hole size) after setting. NOT SELF PIERCING. A special tool is required to install these grommets. Micron Hand Tool Available on this site.
How high do you hang 84 inch curtains with grommets?
If you are interested in a curtain with grommet tops, there will usually be an inch and half of fabric above the top of the grommet. Therefore, an 84 inch length curtain with grommet tops will have an actual hanging height of around 82.5 inches.
