Table of Contents
Electric strikes replace a standard door strike and is connected to a power supply. When an electric strike is activated, it releases the latch, unlocking the door. Electric strike locks remain locked from the outside at all times. When the door closes behind you, it automatically returns to a locked position.
Does an electric strike need a power supply?
Electric strikes require a power supply to function. Electric strikes have some type of keeper, or gate, for the latching mechanism on the lock. When a credential is presented and the strike is disengaged, the gate on the strike will allow the latch to be pulled through the gate.
Are electric strike Fail Safe?
A fail safe electromechanical lockset is locked when power is applied and unlocked when power is removed. When power is removed, the lever can be turned to retract the latch. Fail safe electromechanical locks are used for stairwell doors providing re-entry.
Do you need an electric hinge with an electric strike?
Your hinges must be compatible with other devices such as electrified mortise locks, electrified cylindrical locks, delayed egress exit devices, electric trim, and electric strikes for door pairs. Additionally, you’ll want to ensure hinge compatibility of power control inputs for electric locks.
Can you put an electric strike on a double door?
6100 Series Electric Strike The 6100 Series are heavy-duty stainless steel construction rim exit strikes. They are ideal for drop-in replacement or new construction with five models providing coverage for many single or double door applications, including fire-rated doors.
What is electric strike release?
Electric strikes replace a standard door strike and is connected to a power supply. When an electric strike is activated, it releases the latch, unlocking the door. Electric strike locks are opened from the inside by pressing a panic bar or other manual release device.
How do you install a buzzer lock?
How do I Install a Buzzer Door Lock? Switch off the doorbell installed on your door. Attach the mounting bracket on the wall over the wires of the doorbell. Take the disconnected wires of the doorbell and connect them to the AC adapter of the buzzer. Disconnect any other wires that are connected to the doorbell.
How much power does an electric strike use?
Low Current Draw ™ electric strikes use less then 300 Milliamps (. 300 Amps) or around 3.6 – 3.7. Watts to activate. This provides plenty of “cushion” for PoE based access control systems, room to run longer wires, or extra amps to run additional devices.
How does an electric door lock work?
The lock system works just like a traditional lock – with a latch and a bolt. Electronic door locks use something called actuators, which move the bolt of the lock into place so that they door can open. You simply have to trigger the actuator and your door will open.
What is strike lock?
What are Electric Strike Locks? Electric strike locks are electromechanical door locking mechanisms. These locks enable you to release the locked latch or bolt on a given door from the outside (using a key card, key pad, or other electronic access key).
What is a magnetic door lock?
Magnetic locks use electromagnetism to control the entire locking mechanism. When the magnet is energized, it bonds to the armature and locks the door. As the electric power activates the magnet, the bolt locks the door. To unlock the door, simply remove power.
Can an electric strike be installed in a fire rated door frame?
According to current codes, most stair doors have to allow reentry back into the building during a fire, therefore, a fail safe product must be used. If a door is fire-rated, an electric strike has to be fail secure to provide positive latching.
What is storeroom door hardware?
Storeroom locks are used when the outside lever should be locked at all times. A key is used to retract the latchbolt and open the door; when the key is removed the door is locked on the outside. There is no means to lock/unlock the door from the inside.
What does electric hinge do?
Electric hinges are used when a locking device is mounted on a moving door and power and signals must be brought off the door to the controller and house wiring. The electric hinge is typically used to replace the center hinge, or one of the center hinges on four hinge doors.
What is the difference between electric strike and magnetic lock?
The primary difference between electric strike locks (door strike) and magnetic locks (maglocks) is their power requirement. Maglocks are fail-safe, while electric strikes are generally fail-secure. In other words: Magnetic locks require power to lock the door, whereas electric locks require power to unlock the door.
What is an electrified door?
Electrified hardware uses power to control the locking and unlocking of the door. Most electrified hardware is available in one of two functions: fail safe or fail secure. Fail safe and fail secure refers to the status of the secure side (key side, outside) of the door.
Why do doors Buzz?
Electric strikes are sometimes equipped with buzzers that allow someone outside the door to hear when the door is open. The buzzing noise is typically made by applying alternating current (AC) to the strike instead of direct current (DC).
How does an electrified mortise lock work?
The electrified mortise lock is a standard mortise lock with a solenoid-activated pawl within the lock that places a barrier to turning the lock from the outside. Typically, the inside handle is always free to turn, making egress possible at any time with no special knowledge.
