Table of Contents
Flocculation is a process by which a chemical coagulant added to the water acts to facilitate bonding between particles, creating larger aggregates which are easier to separate. The method is widely used in water treatment plants and can also be applied to sample processing for monitoring applications.
What causes flocculation?
In dispersed clay slurries, flocculation occurs after mechanical agitation ceases and the dispersed clay platelets spontaneously form flocs because of attractions between negative face charges and positive edge charges.
What is the mechanism of flocculation?
Flocculation is the chemical process of adding substances, known as flocculants, to cause the colloidal substances in the water to stick together, thus facilitating their subsequent filtration and removal.
What is flocculating ion?
Coagulation or precipitation:-it is a process of aggregating together the colloidal particle so as to change them into large sized particles which ultimately settles as a precipitate. The ion which is responsible for neutralization of charge on the colloidal particles is called the coagulating ion or Flocculating ion.
What is flocculant made of?
The aluminum-based flocculants include aluminum sulfate, aluminum chloride, sodium aluminate, aluminum chlorohydrate, and polyaluminum chloride. The iron-based flocculants include ferric chloride, ferric sulfate, ferrous sulfate, and ferric chloride sulfate [15, 69].
What is flocculation simple?
Flocculation, in physical chemistry, separation of solid particles from a liquid to form loose aggregations or soft flakes. These flocculates are easily disrupted, being held together only by a force analogous to the surface tension of a liquid.
What causes flocculation in water treatment?
Coagulation and flocculation occur in successive steps intended to overcome the forces stabilising the suspended particles, allowing particle collision and growth of flocs, which then can be settled and removed (by sedimentation) or filtered out of the water.
How is flocculation used in industry?
The flocculation process is applied in wastewater treatment to separate the destabilized colloid particles (or the particles formed during the coagulation phase) by forming flocs. The scope of this research was to identify the predictability of the synthetic organic flocculants use for industrial wastewater treatment.
How can flocculation be prevented?
When particles of a suspension come close together they can form aggregates called flocculates which will settle more rapidly. To prevent that we often coat the particle with a charged surfactant. The charge (Zeta potential) acts to keep the particles separate and prevent flocculation.
What is an example of flocculation?
Flocculation and coagulation treatment chemicals are used in effluent wastewater water treatment processes for solids removal, water clarification, lime softening, sludge thickening, and solids dewatering. Examples of ChemTreat coagulation products include aluminum salts, iron salts, and polyelectrolytes.
How do you pick a flocculant?
How to choose flocculant? the molecular structure:the molecular structure of flocculant depends on the dewatering performance be required. the molecular weight::The choice of molecular weight depends on the types of dewatering equipment, and molecular weight are also said the length of the polymer chain.
Why is flocculation important?
Applying flocculation ensures a high flux over filtration units as well as efficient and cost effective separation of cell material from supernatant. Used water can contain significant amounts of suspended particulate matter, which often takes long to sediment.
What is an example of flocculation test?
A Flocculation Test Procedure is used to determine how much Flocculants need be added to solids in suspension (slurry or pulp) to cause the individual particles to collect in the form of flocs. Flocculation, i.e. aggregation through the use of long-chain organic polymers that bridge between adjoining particles.
What chemicals are used in flocculation?
Chemicals (coagulants) are added to the water to bring the nonsettling particles together into larger, heavier masses of solids called floc. Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
Where is flocculation used?
Flocculation is a process by which a chemical coagulant added to the water acts to facilitate bonding between particles, creating larger aggregates which are easier to separate. The method is widely used in water treatment plants and can also be applied to sample processing for monitoring applications.
What is flocculation wastewater?
Flocculation is a water treatment process where solids form larger clusters, or flocs, to be removed from water. This process can happen spontaneously, or with the help of chemical agents. One of the requirements for treated water leaving wastewater plants is the removal of suspended solids.
What is difference between flocculation and coagulation?
Coagulation: Particles that aggregate with themselves e.g. by the influence of a change in pH. Flocculation: Particles that aggregate by the use of polymers that binds them together. Coagulation and flocculation are well-known techniques within wastewater treatment.
What is the difference between flocculation and Deflocculation?
The key difference between flocculation and deflocculation is that flocculation is the formation of flocs by the clumping of fine particles, whereas deflocculation is the dispersion of flocs to form a stable colloid. Flocculation refers to the formation of clumps from fine particles in a colloid.
What causes yeast flocculation?
Flocculation involves the interaction of cell wall proteins of one cell adhering to a receptor site of another cell. Lager yeast strains aggregate into large groups, rapidly sedimenting to the bottom of the fermenter, while ale strains may rise to the surface to form a thick top layer.
Can you drink flocculant?
In addition, coagulants and flocculants are expensive, which is why you want to avoid adding more than are necessary to the water; drinking water treatment plants use “jar tests” to identify the optimal coagulant and flocculant concentrations. Do not drink any of your water samples—even if they appear clear.
