Table of Contents
A swimming pool ionizer cleans and sanitizes pool water by releasing positively charged copper and silver ions into the water to destroy algae and bacteria. Even though ionization is a proven method for destroying unwanted bacteria and viruses, it’s generally not as effective as chlorine alternatives.
Do pool ionizers really work?
Yes! Research has shown that those who use solar ionizers have to use significantly less chlorine and chemicals to keep their water clean. While it’s not a substitute for chlorine, some ionizer users have reduced chlorine use by up to 50%. It has also shown to help reduce surface stains and buildup around your pool.
How long does it take for a pool ionizer to work?
Ionizers often require a lot of time before becoming effective in water. On average, expect the pool ionizer to take up to two weeks before the silver and copper ions can accumulate adequately in the water. It may also take a few more days for the ionizers to give their full water purification results.
What should my pool ionizer be set at?
The ideal range is 7.2 to 7.6. Anything outside of this range will affect the feel of the water and the effectiveness of the chlorine. With copper ionization, acidic water will increase the risk of copper staining on the pool lining and surfaces.
Do you need chlorine with a pool ionizer?
Pool ionizers are extremely effective at controlling algae. If you have an ionized pool, you don’t need algaecide and you need less chlorine to keep the water clear. Plus, ionizers use natural minerals with no additives, so they are a clean and healthy way to control algae.
How do I know if my ionizer is working?
Hold the meter approximately one foot (30.5 cm) in front of the ionizer. Monitor the display. The value displayed is the offset balance of the ionizer, which is the difference between the number of positive and negative ions being emitted.
What does an ionizer do for an above ground pool?
The Power Ionizer uses the completely safe process of ionization, releasing precise levels of copper and silver ions into your pool water, which in turn kill algae, bacteria and viruses in your pool water. Chlorine usage is reduced to weekly shocking, thereby reducing red eyes, dry skin, bathing suit fading and odor.
When should I replace my ionizer?
Swimming pool ionizers use a cell to house the minerals that are released into the water. This cell is usually composed of two rods that are either copper or a mix of copper and silver. As the minerals are released into the water, the rods wear down and typically need to be replaced every 6-12 months.
Can you shock a pool with an ionizer?
Ionization Isn’t a Solo Act You must shock your pool water with chlorine, bromine or another acceptable chemical as recommended for the volume of water in your pool. If you run your pool ionizer continuously, you’ll likely need to shock your pool once a week. You won’t need floating chlorinators or chemical dispensers.
Do copper pool ionizers work?
Ionizers release heavy metals that can kill bacteria when exposure is long enough. But pool ionizers have drawn a lot of scrutiny from government authorities. These authorities argue that silver and copper ionizers have not been proven adequately effective in controlling human pathogens in a swimming pool or spa.
How do I start my pool ionizer?
The black power cable must be plugged into a GFI protected outlet. Open any closed valves and restart the pump. With a ClearBlue system, the ‘Ionizing’ light will start flashing when the tee fills up with water and the system starts working.
How long does a solar pool ionizer last?
The Floatron ionizer is rated to treat up to 35,000 gallons, and can do so reliably. Even in warm, algae-friendly climates, you can treat a 35,000-gallon pool with no issues. The existing electrodes should last for one or two seasons.
How do you clean an ionizer?
Only use a slightly moist cloth (preferably a microfibre cloth) to simply wipe the appliance, focusing especially on the carbon brush. Wipe it at least once a month. If the brush is hard and sticky on touch, you can use a small amount of mild soap to dissolve the dirt.
How is ionized air measured?
The ion concentration in the air is measured with ionometers. These measurement devices usually contain an external tube electrode in which an additional, smaller tube electrode is insu- lated and a fan. DC voltage is applied to both electrodes and hence an electrical DC field is generated between both tube electrodes.
Can I use an ionizer with a salt water pool?
However, you can use shock with a salt chlorinator if required. However, if your water is really ‘hard’ meaning there is a lot of ‘dissolved solids’ or sediment, you will need to clean the salt cell more frequently. Pool Ionizer. Pool ionizer systems add microscopic mineral ions to the water.
What is a copper ionized pool?
Copper ionization is a process where copper ions are introduced to a water source essentially using electrolysis. The copper ions are generated by using electrolytic controller devices (ionizers) that apply a low current to a flow cell that is plumbed into the pool’s return line.
How do you clean copper ionizer?
Simply soak your copper ionizer and basket, rinse and gently brush off any left over residue! Prevents messy hands and endless Scrubbing! Now you can prolong the life of your Solar Pool Ionizers’ Copper Anodes and save money over time! One Bottle Lasts up to ONE YEAR!.
Do copper anodes work in pools?
Copper ionization is a safe way to clean your pools. It kills viruses and bacteria including black algae, which is a tougher type of algae. Unlike chlorine, copper ionization does not cause skin, hair or eye problems. It almost completely eradicates the need for chlorine and other pool chemicals.
