Table of Contents
Is a jointer and planer worth it?
ANSWER: A jointer is one thing and a wood planer (more properly called a “thickness planer”) is another. A stationary, floor-mounted jointer is even better than a benchtop one because it allows you to work with longer pieces of wood and (in some cases) wider pieces of lumber.
What is a jointer and how does it work?
A jointer is used to make the face of a warped, twisted, or bowed board flat. After your boards are flat, then the jointer can be used to straighten and square edges (guard removed for photo).
Can you use a planer without a jointer?
-wide jointer that can keep up with your planer, Asa Christiana gives you a few great ways to get flat, straight boards without owning a wide jointer. One of the first milling tools most people buy is a thickness planer. That means you don’t just need a jointer; you need one as wide as the boards you’ll commonly use.
What is a jointer vs planer?
A jointer creates a flat surface on wood, and yes, it can be used to correct bow and warp on one side of a board at a time. “A planer is a thicknesser. It takes a thick board and makes it thinner. At the same time, the planer will also make the rough side both smooth, and parallel to the other side.
What is a jointer planer machine?
A jointer/planer combination machine is just that. It’s a machine that converts from a jointer to a planer, and it uses a single cutter head for both operations. Combination machines have been the norm in Europe for decades, but they’re becoming more popular stateside.
Do you really need a jointer?
Simply purchase your lumber already milled in S3S or S4S form (surfaced on three sides or surfaced on 4 sides). If you’re at a point in your woodworking where you’re starting to use rough sawn lumber, say from a lumber mill or your local sawyer, then a jointer is absolutely essential to your shop workflow.
Can a planer be used as a jointer?
A planer can be used as a jointer by following a few woodworking tricks. If your workshop doesn’t have a jointer to square up an edge or your wood piece is too large to fit through, you can use your planer to flatten both pieces of wood.
Is buying a planer worth it?
A thickness planer serves three unique purposes that other tools do not: 1) It makes the second face of a board parallel to the other face; 2) It smooths rough stock; and 3) It reduces stock down to the exact thickness you need. If you really want to get into woodworking, a thickness planer is worth the cost.
What is the purpose of a jointer?
The jointer derives its name from its primary function of producing flat edges on boards prior to joining them edge-to-edge to produce wider boards. The use of this term probably arises from the name of a type of hand plane, the jointer plane, which is also used primarily for this purpose.
What are the benefits of a jointer?
Here are some benefits you gain from running your lumber through a jointer. A jointer makes flattening surfaces and squaring edges quick and easy. With a jointer, you can remove all forms of defects (twists, wraps, cups, and bows) that can prevent your lumber from being flat or square. The jointer is fully adjustable.
How do you flatten a board without a jointer or planer?
Use your tablesaw to rip away the runners and square the edges. To flatten the board accurately, cover your tablesaw with craft paper and use it as a flat reference surface when attaching the runners. On roughsawn boards like this one, the flattened area becomes visible as it exits the planer.
What is more useful a jointer or planer?
In my opinion, you should purchase the planer first. You’ll be able to accomplish more with it on its own than you can with a jointer. The jointer excels at making one flat face and one square/flat edge and that’s about it.
What is the purpose of a planer?
A planer is used to shave wood from the surface of boards. Imagine scraping a knife across the top of a block of butter. That’s pretty much the action with a planer – though you might need a bit more muscle power! They’re used to make a rough surface flat and smooth, or to reduce its thickness.
Can you use a table saw as a planer?
Because of this, it is a wise practice to leave enough material in your original chunk of wood to ensure that, should the wood start to warp during the process of flattening it, you can take it back to a planer or jointer to flatten and square one face again.
Can a jointer cut hardwoods?
That’s a job for the thickness planer. Although the jointer can remove wood from both faces in turn, the result is almost certain to be a tapered board.
How much does a jointer planer cost?
Compare prices for the Jet JJP-8BT 8″ Jointer Planer Price $609.99 To Shop.
What can I use instead of a jointer?
If you don’t have one, and one isn’t available to you, you can make a router sled and use that to flatten both faces of your board, then a different technique to edge joint them. Last but not least, this will hold true for all the techniques mentioned, you can always use hand tools!.
Can you plane a 2×4 on edge?
No, it works fine. Knots in the edge may be a problem, so keep the depth of cut shallow. You might want to joint one edge first, before you plane the other edge.
