Table of Contents
How do the hydraulics on a log splitter work?
Most log splitters use a hydraulic cylinder (like these) to push a cut piece of log into a sharpened wedge, which splits it. The cylinder is driven by hydraulic oil, under pressure, produced by a hydraulic pump. The oil from the pump runs to a hydraulic valve, which provides control over the movement of the cylinder.
How does an electric log splitter work?
A general log splitter or an electric model works in a manner that is very similar to a human using an ax to cut wood. These log splitters are based on a hydraulic pump system which either pushes a log of wood into a blade or the hydraulic pump swings a blade through the wood.
How does a mechanical wood splitter work?
How Log Splitters Work An engine, normally a small four-stroke gasoline engine, provides the power for the system. The hydraulic oil pump creates a stream of high-pressure oil, which runs to a valve. The valve lets the operator actuate the hydraulic cylinder to split a log.
How do you split logs with a log splitter?
Cut Wood Down to Size: Vertical/Horizontal Log Splitters Flip the splitter into a vertical position. Stand your logs on their ends – no need to lift them! Cut your logs in two. Shift your splitter back to its horizontal position. Split your wood into smaller logs that you can catch and cradle with minimal effort.
Do electric log splitters work good?
If you want to do you back a favor and replace your axe with a log splitter, there are many great options to choose from. While gas-powered versions are bigger and more powerful, electric splitters are quiet, less polluting – and usually quite sufficient for most home users.
Are electric wood splitters any good?
Electric log splitters are typically priced a lot lower than a gas powered model due to the decreased amount of spitting capacity in which they provide. Another added benefit is that due to the lack of gas used to power the log splitter they do not release any fumes which makes them safe to use indoors as well.
How many tons do I need for a log splitter?
Six-inch logs that are season require a 4-ton splitter, 12” seasoned logs need a 7-ton splitter, 12” green logs require a 16-ton splitter, 24” seasoned logs need a 20-ton splitter, and 24” green logs need a splitter that’s 30 tons or bigger. As you probably noticed in the first factor, the type of log matters.
How many horsepower is a log splitter?
A regular hydro splitter around 20-30 tons seem to have around 6.5hp gas engine. Get above ~30 tons and you typically get 9-11 hp range.
Is kinetic or hydraulic log splitter better?
One more benefit: gas-powered kinetic wood splitters are incredibly energy-efficient tools that use less fuel than their hydraulic counterparts. Obviously kinetic splitters have a lot to offer. However, in certain cases, a hydraulic splitter still might be the better option for some people.
Is it best to split logs wet or dry?
Dry Wood Is Typically Easier to Split Normally, though, you’ll find that dry, seasoned wood is easier to split than wet wood. Regardless of the tree species from which it was harvested, dry wood contains less moisture, so there’s less resistance when cutting and splitting it.
How long after cutting a tree can you split it?
In general, whole logs take anywhere between nine and 12 months to season, while split wood only takes about six months. This time, of course, will depend on the conditions to which the wood is exposed.
Will a log splitter split green wood?
Green logs still have moisture in them, so they’re harder to split than dry wood. You’ll want more tonnage if you plan on splitting newly cut logs. How thick are the logs you need to split? As you can guess, the thicker the logs, the more tonnage you’ll want.
What size hydraulic pump do I need for a log splitter?
This 16 gallon per minute hydraulic pump is a must have for any log splitter application. Fits a wide range of applications, most commonly used on log splitters with a rated force less than 35 TON. This 2 stage gear pump allows for maximum speed without a loss of pressure.
How can I make my log splitter come back faster?
Only way to speed up a splitter is to move more oil. Either get a bigger pump or speed up the existing pump.
What is the fastest hydraulic log splitter?
This Hyper Split Fast Cycle log splitter by Tool Tuff Direct is one of the fastest hydraulic log splitters on the market today thanks to their new cylinder technology. Powered by a Ducar 6.5HP horizontal shaft engine. This proven engine has been tested in cold weather and high elevations.
What does P and T stand for in hydraulics?
Directional control valves are one of the most basic components in any hydraulic circuit. The supply port, which is called the ‘P’ or pressure port, a tank or ‘T’ port which takes the spent fluid back to the hydraulic tank, and a working port, called the ‘A’ port, that delivers the fluid to the load.
How do you adjust a 2 stage log splitter pump?
How to Adjust a 2-Stage Pump Adjust the hydraulic gauge by locating the adjustment screw on the back of the gauge. Use a flathead screwdriver to turn the screw. Adjust the pressure switch, located behind the hydraulic gauge, by using a wrench to loosen the lock-nut on the switch, then turning the adjusting screw.
How do you adjust the pressure on a log splitter?
Twist the screw on the side of the pump clockwise with a flat blade screwdriver to increase pressure, according to the scale printed or embossed on the side. Turning the screw counterclockwise decreases pump pressure. Raise the guards on the sides and back of the splitter to the upright locked position.
