Table of Contents
These systems work like a septic tank in the sense that they are enclosed container that sits beneath the concrete floor, they collect the bathroom waste water and then pump it up-and-out of the basement into you existing septic system.
Can you have a toilet in the basement?
If you think plumbing can be difficult above ground, then you can only imagine the challenges that arise when installing a basement toilet. But don’t give up just yet: With the right plumbing solutions for your space, you can easily install a basement toilet.
How does sewer work in a basement?
At the lowest point on your basement floor, the floor drain acts as the outlet for any unwanted water, whether it’s from a heavy rain, condensation from your HVAC unit, or a leaking water heater. Drains connected to the sewer system are suitable for draining a washing machine, water softener or a basement laundry sink.
What is needed for a basement toilet?
When planning for your basement bathroom, you also need a supply of water, a source of electricity, a small discharge pipe (only 3/4 to 1″), and someone skilled in installing plumbing. You don’t need to break up the floor! You don’t need to drop a ceiling! You don’t need custom equipment!.
How do you put a toilet in a basement without breaking concrete?
The best way to install a basement toilet without damaging the basement floor is to look at a toilet with a high water level. While traditional basement showers require drilling concrete to add drainage, the Saniflo system is installed on upper concrete floors.
Do Upflush toilets work?
Does it work?” The answer is yes! For all intents and purposes, an upflush toilet is exactly the same as any standard toilet. Waste goes in and flushes out the bowl with the help of strong water pressure. The only difference is what happens to that waste after you flush.
Is it worth putting a bathroom in the basement?
Adding a bathroom to your basement makes it livable space, which increases the overall market value of your home. A bathroom in your basement can also be a huge selling point for buyers if you are ever looking to sell. When a basement is unfinished with no bathroom, buyers look at the basement as wasted space.
Does a basement need a floor drain?
Basement Floor Drains Are Essential. However, it is vital to properly install drains in the basement to prevent flooding, remove backflow, water from broken appliances, and reduce exposure to sewer gas. Even when a basement has a finished floor, a drain is necessary in case of an emergency and for a home’s maintenance.
Where does floor drain in basement go?
Your basement floor drain is located at the lowest point of your basement, and its job is to direct any water safely away from the house and to the sewer system or municipal storm drain system.
Does a basement floor drain have a trap?
The floor drain is considered a sanitary fixture. That means it functions just like a toilet or sink or shower. It has a trap inside of it just as those items do, and it holds water to seal away any foul odors trying to get into your basement.
Are Upflush toilets loud?
This toilet was installed in our basement so we needed an upflush. We have the bathroom sink and shower hooked up to it as well. It is very loud especially when someone is taking a shower because it pumps almost continuosly. It works fine though and seems like it is good quality.
How much does it cost to install a basement toilet?
Cost to Install Toilet in Basement Installing a toilet in your basement costs on average $1,695. Most homeowners pay between $1,070 and $2,370. Most of the cost is from the cost of installing new plumbing. If you already have plumbing in your basement, expect to pay closer to $372.
Can a toilet and sink share the same drain?
In the US, with modern regulations, in most municipalities, yes, they do. The water and solids from your toilet waste line and the water from your drains end up in the same sewer line, if you have access to a municipal sewer system.
Why is basement toilet elevated?
Because sewage-ejector units sit aboveground, fixtures like toilets and showers or baths will have to be elevated about six inches to gravity-drain into the tank.
Why were toilets put in basements?
Because of old school plumbing technology, sewage backups were much more frequent many years ago. To prevent sewage backup into the main part of the house, toilets were installed in the basement. “Sewage backs up the pipe and into the fixtures that are connected to it,” Martin told TODAY.
What is a Saniflo toilet?
What is a Saniflo Toilet? A saniflo toilet (also known as a macerator toilet) differs from a conventional toilet in two ways. Secondly, instead of flushing waste through drainage in the floor, a macerating toilet system uses a centrifugal pump to flush the waste out of the toilet and into the general waste system.
How much does an Upflush toilet cost?
Upflush toilets typically cost $600-$800. A professional plumber can usually install one in an hour or two ($100-$200) for a total cost of $700-$1,000. Sewage ejector systems cost $400-$700 depending on the tank size. These systems do not come with a toilet, however, so one must be purchased at additional cost.
How good are Saniflo toilets?
Saniflo toilets are installable almost anywhere in the home, regardless of what your drainage system or plumbing setup happens to be. Because it is an upflush system, these toilets are an excellent addition to a basement bathroom where upward movement of waste is necessary.
