Table of Contents
Instructions
- Strip the Walls to the Studs. Remove everything in the shower alcove down to the studs.
- Install a Moisture Barrier.
- Install Cement Board Backer Panels.
- Mark Layout Lines.
- Install the First Row of Tiles.
- Continue Tiling Upward.
- Grout the Tile.
- Clean the Tile Surface.
How do you install tile over a shower surround?
How to Attach Tile to Drywall Above a Shower Surround
- Step 1: Create a Template.
- Step 2: Lay Out Your Tile Pattern.
- Step 3: Cut Edge Tiles.
- Step 4: Create Chalk Lines.
- Step 5: Apply Tile Glue.
- Step 6: Attach the Tiles.
- Step 7: Make Additional Chalk Lines.
- Step 8: Finish Attaching Tiles.
What should I put above my shower surround?
You’ll want to highlight the former if it has custom or decorative tile, and the latter to distract from a plain or inexpensive shower surround.
- Tile It Up. Add a few rows of decorative tile above the surround to extend it all the way to the ceiling.
- Waterproof Art.
- Touch of Paint.
- Simple Shelves.
- Raise a Panel.
How do you waterproof a shower without tile?
If you’re looking to mix it up a little with alternative shower materials, here are a few options to consider:
- Acrylic Panels. Acrylic shower panels offer a smooth and seamless look to your shower.
- PVC Panels.
- Marble.
- Stainless Steel.
- Stone Resin.
- Wood Shower Walls.
- Paint.
Can you tile over acrylic shower surround?
Note that you cannot tile on the floor of standard fiberglass/acrylic shower pans. Slight flexing will quickly crack the grout and even the tiles. However, some specialty shower pans such as those made by Tile-Redi are designed for over-tiling.
What goes behind shower panels?
In showers, the standard substrate is tile backer, also called cement board or cement backer board. Ceramic and porcelain tile, more than almost any other surface material, needs a stable, flat, flex-free substrate. Even the slightest amount of movement in a building structure can telegraph to the tile and crack it.
How do you repair drywall over a shower surround?
How to Repair the Drywall in the Bathroom Above the Shower/Bathtub
- Step 1: Remove Crumbling Drywall.
- Step 2: Attach Furring Strips.
- Step 3: Cut and Install Greenboard.
- Step 4: Apply Joint Compound.
- Step 5: Apply Additional Joint Compound.
- Step 6: Prime the Patch.
- Step 7: Apply Silicone Caulk.
- Step 8: Dispose of Excess Drywall.
Does shower tile need to go to ceiling?
With the many customization options available when you are buying a new shower, one question many ask is, “Should I go up to the ceiling with my tile?” The answer is, IT’S UP TO YOU!Mar 21, 2020
Do you have to put drywall behind shower surround?
Fiberglass and acrylic tub and shower enclosures come with a flanged edge that attaches directly to the wall studs, and the proper way to hide this flange is to install drywall over it. Consequently, enclosures are typically installed on the bare studs.
How do you replace a shower wall panel?
- Step 1: Remove the Plumbing Trim. Unscrew and remove the faucet handle, tub spout, showerhead and (optionally) the shower arm.
- Step 2: Cut the Sealant Around the Surround.
- Step 3: Pry Off Any Molding.
- Step 4: Remove the Corner Panels (if Applicable)
- Step 5: Remove the End Panels.
- Step 6: Remove the Back Panel.
How do you waterproof drywall above a shower?
How do you waterproof drywall in a shower?
- Clean the drywall with a shop vac or microfiber tack cloth.
- Allow the drywall to dry.
- Pour the oil- or latex-based waterproofing primer into a paint tray.
- Pour the waterproofing paint into a clean paint tray.
Should I use a shower pan or tile?
Over time, these structures can give out, develop cracks or holes, and turn into a leak that rots the floor underneath. With proper sealing, a shower pan can eliminate this issue and the need to install a base underneath. In contrast to a tiled shower, a shower pan has no grout to clean, maintain or worry about.
Can you cut FlexStone shower surround?
Trim the panel to size with a utility knife, jigsaw, or power plane and dry fit until a tight fit is achieved. 2.2) When satisfied with the fit, peel protective masking back from the edges of the panel (approx. 4”) and clean burs from any rough edges.
How do I know if my shower surround is fiberglass or acrylic?
Look for dulling of the color. Fiberglass shower color fades over time. Look in different areas of the shower for inconsistency in color. In addition, if the shower surface is cold to the touch even in a heated bathroom, it is likely fiberglass, as acrylic is warm.
Can you tile above a shower insert?
Just as you can use tile inside the shower itself, you can finish the wall above it with ceramic tile. Using subway tile above shower inserts adds a different look than traditional tile because of its smaller size.
Is FlexStone a good product?
Unlike tile grout and natural stone, FlexStone won’t mold or mildew and is easy to clean. FlexStone is also an excellent choice for other projects, such as wall-cladding, wainscoting, window sills, etc. FlexStone has passed commercial fire testing and is suitable for commercial work as well.
How do you cut a shower surround?
- If you need to trim the panels for a proper fit, you can use a piece of masking tape on the panel to mark it.
- Make your measurements and draw the cut line using a straightedge.
- Use a jig saw to cut the panel to the proper size.
- If you need to trim the corner panels, you can do that with scissors.
What type of shower base is best?
4 of the Best Shower Base Flooring Options
- Tile Shower Bases. You may decide that you want to tile the floor of your shower to match the walls or bathroom floor tile.
- Molded Stone Shower Bases. Molded stone shower pans can offer you another high-end and elegant solution.
- Acrylic Shower Pans.
- Fiberglass Shower Pans.
Do you drywall over shower flange?
Take a whole sheet of dry wall and cut out for the shower stall. They drywall only up to the flange, then attach a tear away bead to the flange, then put mud between the bead and the drywall.
