Table of Contents
How do you store dock lines on a boat?
How do you stow a dock line?
How can I protect my mooring lines?
Tubular webbing is a flexible sleeve which is easy to fit and keep in place – ideal for threading on to mooring lines and on to the loops spliced in the end of the line. PVC hose is a little unwieldy and bulky but offers robust protection for mooring and anchoring strops or bridles.
How should you approach a dock when the wind or current is pushing you away from the dock quizlet?
Docking With Wind or Current Away From the Dock Approach the dock slowly at a sharp angle (about 40 degrees). Use reverse to stop when close to the dock. Secure the bow line. Put the boat in forward gear briefly, and slowly turn the steering wheel hard away from the dock—this will swing in the stern.
What is a Flemish flake?
The Flemish Flake (ABOK # 3102, p 516) provides an attractive, neat way of temporarily stowing the end of a rope. The alternative method is to lay the rope out so that it has no twists. Then start at the center and rotate the coil on the deck so that the rope winds on from the outside.
What is the best mooring rope?
Nylon for Dock & Mooring Lines recommends using nylon rope for dock and mooring lines; the stretch characteristics of nylon absorb shock and will resist damaging cleats on your boat and on your dock. Nylon is available in 3-strand or twisted line, 8-strand, 12-strand or Mega Braid and in a double braid or yacht braid.
How often should dock lines be replaced?
I change mine when I can’t stand the feel of them (stiff, and green) which is usually about every three years. I use 1/2″ three strand dock line. I try running them through the washing machine each spring, and this helps keep them pliable longer.
What is chafe protection?
To prevent chaffing of boats, chafe guards have been designed to help protect boats from all sorts of damage. A chafe guard forms one of the most important dock products. A chafe guard usually measures around 40 cm in length and can be fixed over and on anchor lines that range anywhere between 10 mm to 23 mm.
What length dock line do I need?
Length. Dock lines should be about 2/3 of the boat’s length when used on the bow and stern. Spring lines should be equal to your boat’s length.
How do I leave the dock?
When the wind or current is pushing your boat away from the dock the procedure is simple. Cast off lines and pull in fenders as the wind blows you away. When clear and safely away from the dock and other boats, shift to forward and depart at idle speed.
Do dock lines float?
The dock line products stay soft and pliable even in cold conditions and the fibers will not sliver. This custom woven product has built in stretch and also releases knots easier than nylon or cotton ropes. The specific gravity of poly rope is less than water so it naturally floats.
How do I make my boat lines soft again?
Soften stiff ropes in a solution of fresh water and fabric softener. Let them sit in it overnight, then rinse thoroughly, and dry away from direct sunlight.
How much does it cost to clean the bottom of a boat?
In an environment such as this, it is crucial to clean boat bottoms every month. Bottom cleaning prices cost between $2.50 and $3.50 USD per foot in this market, so hiring a professional diver with a great service record is important to your boat, your budget and your boating enjoyment.
Can I use oxiclean on sails?
Sail cleaning 101 Add 2 cups of Oxyclean liquid stain remover and mix well. Do not add bleach or other harsh cleaners, which can damage some sail fabrics, bolt ropes, and thread. Completely submerge one sail at a time in the water and let it soak for 24 hours. Thoroughly rinse with clean water (soft if possible).
What is the best way to approach a dock when there was a strong wind or current?
Docking With Wind or Current Toward the Dock Approach slowly, parallel to the dock. Let the wind or current carry your boat to the dock. Shift into gear briefly if you need to adjust position. Secure the bow and stern lines.
What does it mean when you see only a red and green light on another boat?
Navigation lights help you and other boaters determine which is the give-way vessel when encountering each other at night. The red light indicates a vessel’s port (left) side; the green indicates a vessel’s starboard (right) side.
How do you know when you are operating your vessel at a safe speed?
In establishing a safe operating speed, the operator must take into account visibility; traffic density; ability to maneuver the vessel (stopping distance and turning ability); background light at night; proximity of navigational hazards; draft of the vessel; limitations of radar equipment; and the state of wind, sea,.
What is flaking a rope?
Uses: Flaking a rope is to arrange it on the deck ready for easy use. The Figure 8 Flake (ABOK # 3110, p 517) allows the rope to be pulled rapidly off the deck with minimal risk of kinking, twisting, or knotting.
What are the 6 types of mooring ropes?
The most conventional types used in mooring include polyester, polypropylene, polyethylene, and polyamide.Many ropes combine these common materials. Polyester. As a common rope material, polyester offers strength and durability. Polypropylene. Polyethylene. Polyamide.
How thick should a mooring rope be?
Mooring ropes made of polypropylene are weaker and need to be thicker. Mooring ropes of polyester or polyamide can be sligthly thinner. If you have a boat that is significantly heavier than average, make sure to chose a thicker diameter mooring line as well. Mooring lines 8-20 mm are delivered from stock.
