Table of Contents
finishing polymer clay with Polishing cloths You can lay the paper flat on a folded cloth on your work surface and move your bead over it in a circular motion to sand it. Or you can hold the bead in your hand and sand it there. You can even wrap the polishing paper around your finger to sand beads.
How do you sand and polish clay?
How to sand your polymer clay Supplies: Your polymer clay piece, baked. Step 1: Start with your first grit. I like to start by dipping my lowest grit of sandpaper into my bowl of water. Step 2: Repeat with other grits. Step 3: Rinse. Step 4: Dry. Step 5: Glaze.
How do you get a shiny finish on polymer clay?
Polymer clay is not glossy after baking. You can sand, buff, and polish the clay itself (see below), or you can apply a glossy varnish. To make your clay project less shiny, you could apply a matte varnish. Note that adding a glossy varnish can make translucent polymer clay seem more clear.
How do you smooth polymer clay after baking?
To use the acetone, dip the cotton bud in the liquid so that it’s moist (but not dripping), then gently wipe it over the parts of the baked clay that you want to smooth. Don’t press down on the clay, or attempt to vigorously rub the fingerprints out.
Should you paint polymer clay before or after baking?
Polymer clay doesn’t shrink or expand as it cures, meaning you can paint it before you bake. Unbaked clay may create a better bond with paint as it cures. Test different types and brands of paint to find the best results.
What do you seal polymer clay with?
How to seal polymer clay jewellery with a gloss varnish. A gloss varnish will help you to protect any effects you’ve created on the surface of your piece, helping to reduce any damage caused when the piece is worn. However, gloss varnishes are notorious for reacting with polymer clay so take care when using them.
How do you connect two pieces of polymer clay?
To bond uncured polymer clay to another piece, it’s best to use liquid clay or other bakeable glue such as Kato Poly Paste or Sculpey Bake and Bond. To bond two pieces of cured polymer clay that will not be baked again, use a flexible superglue such as Loctite Gel Control, Zap-a-Gap, or Gorilla Glue GEL Superglue.
Why does my polymer clay bubbles after baking?
Those bubbles are caused by trapped air in your polymer clay. When you fold over your strip of clay and insert it in your pasta machine fold last, a little pocket of air gets trapped in the fold. If you keep doing this over and over, more and more air gets forced into the layers of clay.
How do you keep polymer clay flat when baking?
To prevent brown spots from oven spikes, tent your work with aluminum foil pans or an index card. To avoid flat spots on beads, bake them on quilt batting or a bead baking rack. You CAN bake your polymer clay more than once! This is a common practice for intricate pieces.
Can you sand polymer clay after baking?
Sandpaper is used to sand your clay after it has been baked, however you must make sure that you are using Wet/Dry Sandpaper so that you can keep the polymer dust out of the air and use it with water. Start out with the more COARSE grits of sandpaper and than use a very FINE grit of sandpaper.
Can you wash polymer clay?
Did you know that polymer clay is waterproof? Just like any plastic, you can wash polymer clay creations with water. To clean pieces, gently hand-wash them with soap and water. Avoid the dishwasher, though, as the heat can damage your creations.
Can you paint polymer clay after baking?
The short answer is, you can do both but painting the polymer clay before baking it may cause some problems if not all of the water from the paint evaporated completely. The better and safer way is to paint the clay after baking when it is completely cooled down and hardened.
Is polymer clay waterproof after baking?
Is polymer clay waterproof? Yes, once baked, you can seal your project with our glazes to make them waterproof. We do not recommend making dishes or utensils that you plan to drink from, eat off of or serve food even if they are sealed with the glazes.
Can you use sandpaper on clay?
No matter how much you try to smooth out the clay when it’s wet, sanding is inevitable. I start with medium sandpaper (60-120 grit) to polish rougher areas and remove larger bumps in the clay, then I move on to fine (160-240 grit) and super fine (400-800 grit) sanding papers to polish the clay.
Can you seal polymer clay with clear nail polish?
It seems like such a simple solution to use nail polish to accent your polymer clay creations. Or use clear nail polish as a glaze. If you need a spray sealer to coat polymer clay, then you should use PYM II, or Helmar Crystal Kote. These are both polymer clay safe protective coatings.
Can you add water to polymer clay?
you can use water. Cut up, crumble or break down the hardened polymer clay into small pieces. Put a few drops of oil/water to the clay. If using cling wrap, just wrap up.
Does polymer clay break easily?
Polymer clay beads should be bendable if they are baked correctly. Under-baked polymer clay won’t be bendable. It will be brittle and easy to break.
Can you sand air bubbles out of polymer clay?
Okay, so you’ve baked your clay only to find that air has become trapped in your clay and now appears in your finished work. One option is to sand these down. You should start with 400 or 600 grit, automotive grade sandpaper. Wet sand until you have sanded down through the bubbles.
How do you know when your polymer clay is done baking?
Bake for 15 minutes per quarter inch of thickness. For example, a piece of 1/2″ thickness should be cured for 30 minutes. To test the curing, try pressing the tip of your fingernail into the bottom of your piece after it has cooled; it will leave a mark but will not actually enter the clay.
