Question: How Do You Reset The Anti Theft System On A Chevy Cobalt

To reset the 2009 Chevy Cobalt anti-theft system, You start by turning the on-position ignition key and waiting for about 10 minutes until the blinking anti-theft system goes off. Switch off the key and go back to the vehicle to start the car to see if it has been reset.

How do I get my Chevy out of theft mode?

How Do I Reset Anti-Theft System: Chevy Silverado? Insert ignition key. Turn it to the on position. Attempt to start the engine. Leave the key in that position until the security light stops flashing. Once the light goes off, switch the ignition key to off. Wait about five seconds. Try to start the engine again.

How do I get my 2007 chevy cobalt out of theft mode?

To reset your 2007 chevy cobalt security system you need to stick the key in, turn it to start, and let the key sit in the on position for 10 minutes, the light will start to blink. Turn the key back to off, and then turn it and it should start right up.

How do you reset the antitheft system on a 2008 Chevy Cobalt?

To reset the security system or anti-theft system in Your 2008 Chevy Cobalt depress the key fob’s panic button for five seconds before pressing the lock button twice standing 10 feet away from the vehicle. Follow that up by depressing the unlock button twice and Your immobilizer should be reset.

Will disconnecting battery reset anti-theft?

It is another way to solve the problem of anti theft system car wont start. Disconnect the positive terminal of the battery for a minute or two. It will reset the computer system and your car is likely to kick off.

How do I disable GM anti-theft system?

How to Disable a GM PassLock System Leave the ignition key turned to the “On” position after the vehicle has stalled and will not start. Look at the dashboard and locate the theft system light. Turn the ignition to the “Off” position to disable the PassLock system, and wait for 20 seconds for the system to reset.

How do you start a Chevy Cobalt without the key?

There is no way to start a chevy cobalt without keys unless you break the starter system.

Does a 2007 cobalt have a chip in the key?

If your Chevy Cobalt was made in the years 2006, 2007, 2008, 2009, or 2010, then your Chevy Cobalt has a transponder chip key. These keys have a hidden chip inside of them and they need to be programmed to your car. The dealer will ask you to come in or bring your car in.

What does the car with a lock light mean?

The lock and car symbol and warning light you are seeing is saying that the anti-theft system has been activated. If the anti-theft system is stopping the vehicle from wanting to start, it may be contributing to the starting issues. The first thing you should do is try to deactivate the security system.

What triggers theft deterrent system?

The theft-deterrent system in your vehicle may be triggered by the following: Key learning (copy of key made) Forced entry alarm (door, trunk, hood) Charging alarm (electric vehicles only).

How do I know if my PASSLock is activated?

Most PASSLock-equipped vehicles have a telltale indicator in the instrument panel. When a PASSLock-equipped vehicle is being started, the instrument panel warning light for PASSLock remains on until the engine starts.

How long does it take for the anti-theft system to reset?

Leave the key there for 15 minutes; it doesn’t always take that long, but it can. After that time, check to see if the anti-theft light has gone out, if one was lit up. Turn the key backward two places to the Lock position, then wait three more minutes. When that has elapsed, try to start the car.

Is there a fuse for anti-theft system?

It is usually located on the dashboard by the driver’s door, in front of your left knee. You may find the alarm fuse in this fuse box. If you do not find an alarm fuse inside of the car, look in the fuse box under the hood on the driver’s side. Your car model may or may not have additional fuse boxes.

How do I get my car out of anti-theft mode without remote or key?

Disabling the Alarm Without a Remote Insert your key into the car’s ignition and turn the key to the “ACC” position. Locate the transmitter system for your alarm. Repeatedly press and release the toggle switch on the system.

How do you bypass a security system?

Bypass a Zone Enter the following: Your 4-digit code. The number 6 (bypass button) Two-digit zone number of the zone you want to bypass. (01, 02, 03, etc.) Repeat this process for all zones you would like to bypass. Once your system is disarmed, this process will need to be repeated in order to arm your system again.

How do you program a key for a Chevy Cobalt?

Turn the key inside the ignition twice fast without starting the engine. After that release the unlock button on the driver’s door and wait for the locks to lock and unlock. When that happens You will need to hold down the lock and unlock button on Your remote until the doors lock and unlock again.

How much is a key for a Chevy Cobalt?

Compare with similar items This item Key Fob Keyless Entry Remote fits Chevy Cobalt Malibu Pontiac G5 G6 Solstice Saturn Sky Aura (15252034 w/ignition key) KeylessOption Keyless Entry Remote Control Car Key Fob Replacement for 22733524 with Key Price $1495 $14.95$14.95 Sold By USAREMOTE KeylessOption.

How do you program a key for a 2008 Chevy Cobalt?

INSERT working Transponder Key into Ignition and TURN to the ‘ON’ position (just prior to cranking engine), WAIT 1 second and TURN back to the OFF position to successfully enter Programming Mode. REMOVE key from Ignition. INSERT NEW key into Ignition and TURN to the ‘ON’ position (just prior to cranking engine).

How do you program a 2009 Chevy Cobalt key?

INSERT working Transponder Key into Ignition and TURN to the ‘ON’ position (just prior to cranking engine), WAIT 1 second and TURN back to the OFF position to successfully enter Programming Mode. REMOVE key from Ignition. INSERT NEW key into Ignition and TURN to the ‘ON’ position (just prior to cranking engine).

How do you reset the security system on a 2005 Chevy Cobalt?

To reliably reset Your anti-theft system, You’ll need to first enter the vehicle. Turn the key to the starting position, then let it spring back to the “ON” position. Leave this on for twelve to fifteen minutes, or until the Passlock light goes out.

How do you unlock theft deterrent?

Key Insert the key into the driver’s side door lock. Turn the key once, but not all the way to unlock the door. Leave the key in this position for 40-60 seconds. Do this again, but turn the key in the opposite direction. Remove the key from the door, get into your Ford, and start the engine. The system should be reset.

Is the anti-theft light supposed to blink?

So this is the ‘security indicator light’. It blinks slowly when the car is off as a warning the alarm is active. This is normal. It will do this whether the car is locked or unlocked, so long as the ignition is in the off position.