Table of Contents
Fortunately, you can get measurements in three simple steps: Measure the inside of the window frame in three places for width: across the top, middle and bottom. Measure for height: at the left, middle and right side. Measure the depth of the window so you know how deep the blinds can be.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
Are blinds measured width by height?
One of the most important steps is to measure both the height and width in 3 places – top, middle, and bottom. For Roller Shades, Solar Shades, Sheer Shades, or Vertical Blinds use the measurement from the top of the window. For all other styles, use the narrowest width measurement of the top, middle and bottom.
What are standard blind sizes?
If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches. However, window sizes and shapes can vary greatly, especially in older homes or homes with custom windows.
Do blinds have to fit exactly?
Shades and blinds must fit precisely to a window’s measurements only if they are installed inside the window frame or opening. If the shades are installed outside of the window opening — called an outside mount — the shades typically are wider than the window by a few inches and can also be longer than the window.
How much should I subtract for window blinds?
Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame.
How do you measure for ready made blinds?
Use a metal tape measure for accuracy. Measure across the window width, adding an extra 10cm (4″) to the total width to allow a 5cm (2″) overlap either side of the window to block out light effectively. For roller blinds add a further 5cm (2″) to the width to allow room for the operating mechanism.
How much space do you need on each side of blinds?
Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.
Should blinds be flush with window?
1. Measuring window frame for accurate blinds fitting. 1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
What size blinds do I need for a regular window?
The standard sizes of window blinds ought to match these and can be found in most stores: Picture windows: 1–8 feet high, 2–8 feet wide. Double-hung windows: 36–72 inches high, 24–48 inches wide. Sliders: 24–60 inches high, 36–84 inches wide.
How do I measure a window?
Measure the height from the head of the window (top fixed-frame piece) to the windowsill (bottom fixed-frame piece) As with the width, take three measurements: down the left side, right side and the middle. Record the shortest measurement — this ensures that the new window will fit.
How much smaller should blinds be than the window inside Mount?
Inside-Mounted Vertical Blinds Window should have a minimum recessed space of 2 3/8″ for inside mount. Measure the width of the window from the top of the opening to the sill in 3 places.
What length should blinds be cut?
Typically, a set of inside-mount blinds should measure about 1⁄2 inch (1.3 cm) less than the width of the window frame. Make sure you measure the inside of the frame, where the blinds actually fit, and not the entire window frame. Measure in at least three places — the top, bottom, and middle of the window.
How much shorter should blinds be than opening?
To minimize light leakage the blind should overlap the window opening by at least 1 1/2″ on each side for a total of 3″ on entire width. 2) Measure distance from where the top of the blind will be located to the window sill. The blind should overlap the window opening on the top by at least 1-1/2″.
Should blinds touch window sill?
Generally, blinds are usually fitted within a window recess and are fitting so that they touch or sit just above the window sill.
Can you buy ready made blinds?
Steve’s ready made in-stock blinds ship same day or free!* Blinds, shades and other window treatments purchased from Steve’s Blinds In-stock collection are ready made so they will be prepared and shipped to you fast! Most stock blinds even ship same day or they are guaranteed free (see details below).
Does the width of a roller blind include the fittings?
For roller blinds, you only need to measure the width at the top of the recess. This is because the fabric is narrower than overall width of the blind which includes the controls and brackets.
Are blinds better inside or outside recess?
Why fit outside of the recess? The main advantages of hanging your blinds outside of the recess are that more light will enter the room when the blinds are open. You can block out more light when the blinds are closed. However, any items that you have placed on the windowsill won’t be visible when you close the blinds.
Where should blinds be fitted?
They are best described as the depression space between the inside wall and the glass itself. Blinds can be hung within the recess or outside the recess (also called the “actual fit”), and both possess their own list of pros and cons that you will need to consider.
How deep should inside mount blinds be?
3⁄4″ is the minimum depth required for inside mount blinds.
