QA

How Do You Install A French Drain

How deep should French drain be?

French drain depth: About 8 inches to 2 feet deep should be sufficient for many water-diverting projects, though related systems, such as those built around foundations and sub-ground living spaces, as well as the bases of retaining walls, may be deeper.

Can I install a French drain myself?

Because digging the trench can be difficult work on your own, get friends and family to help if possible. Once the trench is complete, installing a French drain is a straightforward process. The new drain will get runoff water under control, protect your basement and keep your yard from becoming a swamp.

Does French drain need an outlet?

A properly designed French drain system does not require an outlet. The water will simply soak into the soil as it flows along the perforated pipe. In fact, a French drain doesn’t require an inlet on just one end either.

How far should French drain be from foundation?

Recommended French Drain Installation Distance We recommend installing the french drains between 2 and 5 feet away from the foundation. There are a few variables that impact the exact distance to dig the new drain lines to carry water away from your home.

Why do French drains fail?

Over time, a French drain may become clogged. Tiny soil and clay granules slip through the pores of the landscape fabric and gradually build up inside the pipe. Another common cause of French drain clogs is root intrusion from grass, shrubs, and trees.

How do I put drainage in my yard?

5 Yard Drainage Solutions You Can Do Yourself Reduce Your Watering Schedule. Extend Your Downspout. Dig a Creek Bed or Swale. Construct a Rain Garden. Install a French Drain and/or Dry Well.

How much does a DIY French drain cost?

According to Fixr, the average French drain costs $4,500. An exterior drain located fairly close to the surface could cost as little as $1,000, or $25 per linear foot on average. Drains installed under your basement floor could cost $2,000 or more. Expect to pay $60 to $70 per linear foot for installation.

What is the difference between a French drain and a trench drain?

Aside from what we’ve listed here, the difference between a French drain and a trench drain is that a French drain is used for water that is underground while a trench drain diverts excess water from a surface.

Can I cover a French drain with dirt?

Can I cover a French drain with dirt? Because a French drain has holes throughout the pipe which allow it collect water, you should not install dirt on top of the drain pipe. Installing dirt will clog the pipe and the holes, rendering it useless.

Where should a French drain drain to?

LOCATION: French drains should run along the center of the low area(s) needing drained, and end at the desired drainage point. There should be adequate “fall” in the french drain construction, for water to naturally run downhill, toward the drainage end.

Where do French drains run to?

As mentioned a moment ago, French drains ensure any rainwater in outside your property will flow away from the building. The liquid runs into a gravel trench and then flows into a pipe at the bottom of the drain. The water travels through the tube and then empties somewhere safe away from the house.

How shallow can a French drain be?

DIGGING A TRENCH FOR A FRENCH DRAIN Because there is a direct relationship between the diameter of a drain pipe and its relative effectiveness, make your trench no smaller than 12 inches wide, and aim for a depth between 18 and 24 inches.

What size gravel is best for French drain?

In general, you want to aim for ½ inch to 1-inch gravel for drainage. Areas that will see especially heavy flow may need larger gravel. Or, projects without drainage pipes may also need larger gravel. For example, a French drain without perforated pipe needs 1 ½ inch gravel.

What is the difference between a curtain drain and a French drain?

A curtain drain is an underground trench that slopes downward. It usually begins around two feet below ground level and is one and a half feet wide. A French drain sits at ground-level. You can see the gravel even with the ground around it.

How much gravel do I need for a 50 foot French drain?

How much gravel do I need per foot of French drain? You would need around 0.72 cubic feet of gravel per foot length of French drain for a typical French drain width of 10 inches and a depth of 12 inches if you’re using a 4″ drain pipe.

Are french drains worth it?

French drain systems are incredibly effective because, unlike typical surface drains, they collect water over the entire length of the drain as opposed to one dedicated area. The force of gravity helps to guide water along a reliably smooth path to a desired discharge point.

How long will a French drain last?

Properly installed drains use advanced plastic sheeting called geotextile to protect the drainpipe from a blockage. French drains can last decades before needing maintenance. If your home requires a sump pump, a high-quality model will last around ten years before needing replacement.

Do you cap the end of a French drain?

Cap the end at beginning of the system. Level rock 4 inches from the top of the trench. Note: If you just dump rock on top of the pipe, it will shift to one side of the trench. Make sure to keep it in the middle of the trench.

How do I keep water from pooling in my yard?

Identify where you have standing water in your yard. Use a shovel to dig a trench in that area that leads to a place where the water can more easily drain. Line the trench with pea gravel. Purchase a French drain pipe or simply get a plastic, flexible landscape pipe.

How long does it take to install a French drain?

Completed Installation Time 6 – 8 Hours | A simple french drain installation can be done in one day by a team of professional landscapers barring any complications. 1 – 2 Days | If you rent a trencher and do the project yourself, you can expect it to take up most of your weekend.

When should a French drain be installed?

When You Need a French Drain When you have a problem with surface water, such as a soggy lawn or a driveway that washes out. If water is getting into your basement. If you’re building a retaining wall on a hillside.