Table of Contents
How to Hydro Dip STEP 1: CLEAN. Using 91% isopropyl alcohol, cleaning cloths and gloves, ensure that the work piece is clean. STEP 3: BASE COAT. Apply the base coat. STEP 2: PRIME. STEP 4: Film placement. STEP 5: FILM hydration. STEP 6: Tape. STEP 7: ACTIVATE & WAIT. STEP 8: DIP.
What materials do you need to hydro dip?
Step-By-Step Guide to Hydro Dipping Large, deep plastic container (the container will have paint on the inside after the hydro dipping is complete) DIY complete hydrographic printing kit. Object to be dipped. Sandpaper to smooth the surface. Rags. Bucket of mild cleaning solution and water. Vinyl, rubber, or latex gloves.
Can I hydro dip at home?
While there are many companies specializing in hydro dip art for large items (e.g. cars and sports equipment), it’s possible to do the process on your own and be creative. Purchase a home hydro dip kit online to apply a design of your choice, with minimal equipment or experience.
What kind of paint do you use for hydro dipping?
You can hydro dip any item with a nonporous surface — all you need are a few simple supplies! Step 1 – Using your 2x Rust-Oleum Spray Paint prime the item that you are going to Hydro Dip. Allow that to dry.
Can you hydro dip without spray paint?
However, you’ll need to be more careful using the spray can because spraying too close can form air bubbles on the surface, leading to undesirable patterns. People would often ask, can you hydro dip without spray paint? Yes, you can.
Can you hydro dip in a bathtub?
You can camouflage your entire rifle by dunking it in your bathtub, using a process known as hydrographics. One side of the film is water soluble, and the film is placed in a tub of water with that side down.
Do you have to prime before hydro dipping?
Dupli-Color Primer The first necessary ingredient to hydro dipping is the primer. It promotes adhesion of the transfer film to the object. After applying the primer, allow for it to dry, before transfering a film onto your part. This can take up to two hours.
Does Hydro dip wear off?
Hydro dipping, also known as Immersion Printing, is a process of transferring colors and patterns onto various materials. The resulting look is 360-degrees of awesome. But does hydro dipping wear off? As long as the base paint remains stable, the hydrographics will remain intact.
How expensive is hydro dipping?
Average Costs for Hydro Dipping The average cost for hydro dipping a wheel for a vehicle is roughly $150, and that pricing can vary by as much as 20% – 50%, depending on the type of activator, finish, and labor costs. Hydro dipping fees for guns typically range from $200 to $500, depending on the make and model.
Do You Use warm or cold water for hydro dipping?
The ideal water temperature range for hydrographic dipping is 80 to 90 degrees Fahrenheit. Some dip manufacturers may recommend a specific temperature, such as 80 degrees.
Can u Hydro dip glass?
These hydro dip glass bottles are colorful and unique and the paint technique is easy. You will never get the same paint finish twice with hydro dipping. I have photos, a tutorial, and a video showing the process. Definitely watch the video because the technique is so much easier to follow.
Does Krylon spray paint work for hydro dipping?
Krylon COLORmaxx Spray Paint It’s good for hydro dipping because it’s simply about two things: colors and surfaces. Krylon’s ColorMaxx is available in 89 colors and adheres to any surface — wood, metal, fabric, glass, ceramic — you name it. This is a great starter paint for those new to hydro dipping.
Is Krylon spray paint acrylic based?
Krylon Crystal Clear Acrylic spray paint provides a permanent, protective gloss coating that will not yellow with age.
Is Hydro dipping permanent?
Hydrographics, otherwise known as Hydro dipping, is paint based printing process. Once your item is painted and hydro dipped, they are protected with an automotive grade clear coat, whilst this is a permanent change, if you ever did change your mind, you could simply paint over it.
Can you use any spray paint for hydro dipping?
Hydro Dipping is where paint resting on the surface of water is then transferred onto an object through dipping. To hydro dip at home, all you need is acrylic spray paint and a large bath of water.
What is the activator for hydro dipping?
INK DRINK FILM ACTIVATOR. INK DRINK Hydrographic Film Activator is an easy to use film activator, compatible with most films on the market. Ink Drink maintains the richness and color vibrancy of your film and activates most films with a single pass (one coat).
What are three methods of applying paint?
Three basic methods apply paint in production installations: spraying, dipping and flow coating. Spraying is by far the most frequently used.
Do you have to clear coat after hydro dipping?
STEP 11: CLEAR COAT Clear coating is highly recommended for all hydrographically decorated parts. This helps to seal in the inks and allows for a cleaner finished product. When the dipped part is dry, apply the clear top coating (matte, semi-gloss or high gloss) to finish off your newly dipped hydrographic part.
How do you prevent bubbles when Hydro dipping?
3. Not Lowering On an Angle. When hydro dipping air bubbles are your enemy and if they get between your product and the paint you’ll be left with a blotchy paint job. Putting your item flat into the paint allows air bubbles to form.
Is Hydro dip waterproof?
Hydro dipping works because when the spray paint is on the water, it does not mix, so when you submerge the object, the paint sticks to the base coat providing a water proof sealant on the outside of the object.
How tough is hydro dipping?
Durability: Hydro dipping is as durable as the paints and clears you use. If you use an automotive grade paint, then your graphics will be as long lasting and beautiful as the paint on a new car.
