Table of Contents
The basic calculation for board feet is: Thickness x Width x Length / 12 = Board Feet. 2 x 4 x 10 / 12 = 6.667 Board Feet. A 2 x 10 -16′ has 26.67 board feet: 2 x 10 x 16 / 12 = 26.667 Board Feet. PCS x T x W x L / 12 = Board Feet. 84 x 2 x 8 x 12 / 12 = 1,344 Board Feet. 1.25 x 6 x 14 / 12 = 8.75 Board Foot.
How do you figure board feet of wood?
Board footage is calculated by multiplying the nominal thickness in inches (T) by the nominal width in inches (W) by the actual length in feet (L) and dividing by 12. The formula is: T x W x L = Board ft.
How do you figure out cost per board foot?
Here’s how to calculate the cost of your order: The number of square feet of a piece of lumber is calculated by multiplying the length (in inches) by the width (in inches) and then dividing by 144. Example: Calculating the total cost of a piece of lumber 6″ wide by 46″ long at a price of $6.30 per square foot.
How do you calculate board feet in a calculator?
To estimate the board feet from a log, measure the average diameter of the smaller part of the log in inches. Then, measure the length of the log in feet. Move the scale’s marker over to where these two measurements meet. Where the two measurements intersect is the approximate board foot output.
What is 200 board feet in square feet?
A 600 board foot kit will cover 600 square feet at 1 inch thickness or 300 square feet at 2 inches thick; a 200 board foot kit will cover 200 square feet at 1 inch thickness, and so on.
How do you calculate wood for a project?
TIP: To calculate board feet: rough standard thickness X actual width X actual length divided by 144. Use the thickness of the material you intend to start with, not end with. For example, the 3/4″ top will start from 4/4 lumber. The legs will start from 6/4 lumber.
How do you calculate lumber for a project?
You can measure board feet by multiplying length x width x thickness in inches, and then dividing by 144. If ordering a large amount by board feet, just multiply the total board feet needed by the price per board foot for the total cost.
How do I calculate board feet in Excel?
Here is the relation: 1 board foot = 144 cubic inches = 1/12 cubic foot. Board foot formula = length * width * thickness. board foot = length(ft) * width(in) * thickness(in) / 144. board foot = length(ft) * width(ft) * thickness(in) / 12.
How many board feet are in a 4×8 sheet of plywood?
Find the square footage of each space and add together to find the total square footage needed. Divide by the total square footage by the square footage of a sheet of plywood to find the number of sheets required to cover the space. A 4×8 sheet of plywood is 32 ft2.
How many board feet are in a 1×6?
1” x 6” x 1′ = 0.50 bd. ft. 1” x 8” x 1′ = 0.67 bd. ft.
How do you figure board feet in standing timber?
The board-foot content of any board may be determined by multiplying the length by the width by the thickness, all expressed in inches, and dividing by 144 cubic inches. The board foot is also the most common volume measure for trees and logs to be used for lumber and veneer.
How many square feet are in a 12×12 room?
How many square feet is a 12×12 room? The square footage of a room 12 feet wide by 12 feet long is 144 square feet. Find the square footage by multiplying the width (12 ft) by the length (12 ft).
Is board feet and square feet the same?
A board foot is actually a measure of volume. By definition, a board foot is one square foot, one inch thick. The most common mistake made in calculating board footage is forgetting to multiply by the thickness.
What does 600 sq feet look like?
So what does 600 square feet actually look like? If you can’t quite visualize how big 600 square feet is yet, no worries. Six hundred square feet is about the size of a standard three-car garage that has enough space to park the cars and walk around comfortably.
How many boards do I need calculator?
To find the number of boards you need, divide the total deck square footage by the board square footage.
How do I figure out how much wood I need for framing?
Multiply the total height and length of the wall to find the total area. Multiply the width and height of each opening to find the area. Subtract the area of the openings from the total area of the wall. Divide the result by 32.
How many shiplap boards do I need calculator?
To calculate the area of this shiplap, we multiply the length and width and then divide by 144 to get the result in square feet. You should then round up to at least 258 boards.
How many decking boards do I need for a 10×10 deck?
For a 10×10 square deck, you would therefore need twenty-two 10′ deck boards. Dimensions for deck boards can vary depending on the look you want and the deck board type you use. However, the most common is a 5/4” thick by 6” wide deck board of any length.
How many board feet of lumber do I need to build a house?
The precise amount of lumber required to build a wood-framed house varies slightly across the nation, but a good average would be 6.3 board feet for the structural framing materials in every square foot of house.
