Table of Contents
What do you need to epoxy tumblers?
Along with at least three days, here’s a list of what you’ll need for your first tumbler: Stainless Steel Tumbler (I used a 20oz) Spray Paint. Painters Tape. Mod Podge. Silicone Brushes. Fine Glitter. Clear Coat Spray. Epoxy (Both A and B parts).
What kind of epoxy is used for tumblers?
Art N Glow is an example of what kind of epoxy to use on tumblers. Being self-leveling and self-degassing, this product can be easily manipulated and adjusted according to the time. It normally takes 40 minutes for it to get ready. It is very user-friendly and is very suitable for tumbler epoxy.
How many coats of epoxy does a tumbler need?
It does depend on what you’re creating, but the average is 2-3 coats. To properly seal all the layers beneath, we recommend using a topcoat of your resin. For a sparkling finish, you can mix in glitter from our friends at Alumilite to realize your epoxy glitter tumbler vision.
Do you have to sand between coats of epoxy on tumbler?
💡TIP: Remember: whenever your resin is dry, you need to sand before you apply a second coat to ensure the two layers bond together. If you don’t sand, you run the risk of the two layers eventually delaminating.
Can you use any epoxy for tumblers?
One of the questions most beginners ask is, what kind of epoxy to use on tumblers. One brand that you can use is the Amazing Clear Cast epoxy, you will find it comes in a 2-part clear coating and casting resin. There is also an entire epoxy tumbler kit available in this brand.
How long does it take for epoxy to dry on a tumbler?
Let The Tumbler Cure: Leaving the motor running, allow the cup to continue turning until the resin is dry to the touch, approximately 18-24 hours later. Remove the tumbler from the cup turner and remove the tape. Allow the cup to continue curing – it will be fully cured at the 72 hour mark.
Why did my epoxy tumbler crack?
So, what exactly causes epoxy to crack? The most common reason is the epoxy got too hot while curing, causing it to cure faster and unevenly. The changes and differences in tempurature throughout the pour caused expanding and shrinking, which in turn cracked the already cured areas.
Why is my epoxy separating on my tumbler?
This problem usually occurs in small spots, but it can happen to an entire piece too. It is caused by the resin and hardener not catalyzing properly, which means that the two parts were either not mixed thoroughly enough, or their mixing ratio was off. To avoid curing issues: Use fresh resin and hardener.
Why does my epoxy tumbler have dimples?
A: Dimples can occur for 3 reasons: 1) If the temperature fluctuates in the room while the ArtResin is curing during the first 24 hours. Make sure that the temperature stays stable in the room ( 72-77F or 23-25C ) while your piece cures. 2) If you get some dust particles in your piece.
What can be used instead of epoxy?
Hard plaster and concrete are excellent epoxy resin alternatives, and their use is not limited to small surfaces only. Unlike epoxy resin, concrete and plaster can be easily applied to large surfaces as well. Other great alternatives to epoxy resin include slush latex, metal, plastic, and alabaster.
What is the difference between epoxy and resin?
The most noticeable difference between these two compounds is their intended use. The Epoxy Coating Resin is intended for coating surface applications, while the Casting Resin is used mainly for jewelry, molds or figurines.
When can I apply a second coat of epoxy on a tumbler?
Depending on the epoxy you’ve chosen to work with, you’ll have to wait between 4 and 24 hours before applying your second coat. Be sure to read your directions very thoroughly before beginning your project.
How long should you wait between coats of epoxy?
When using epoxy, it can be a helpful process to add a second layer, but you want to make sure to follow the correct procedures. With most coating epoxies, if you are trying to build up to your desired thickness, it is recommended to pour your second coat once the first coat is tacky to the touch (usually 4-6 hours).
How do you fix a bumpy epoxy on a tumbler?
An uneven hardening of your epoxy resin can lead to dull, or even tacky spots. To fix an uneven epoxy finish, wait until the epoxy has dried thoroughly, and then sand it lightly with fine-grained wet sandpaper. After this, make sure to wipe down the surface, so it is entirely free of any sanding dust and other debris.
Will epoxy set in cold weather?
Some resin/hardener combinations are formulated to cure in temperatures as low as 35°F. However, simply using a hardener that cures in colder temperatures does not guarantee dependable bonds. Epoxy can be used at cold temperatures but must be handled and applied with techniques adapted to cold temperatures.
Is one coat of epoxy enough?
A durable floor will require at least two coats of epoxy, which must cure overnight between coats. “There is no such thing as a good one-coat job,” says Parker. Once the final coat is down, it’s best to wait at least three days before allowing a vehicle into the garage; full curing can take up to two weeks.
How long should epoxy cure before sanding?
Tip: The epoxy resin must be really dry before sanding. You should therefore allow a waiting period of at least 48 hours before processing. Follow the manufacturer’s instructions, as there are resins that take even longer to harden completely.
