Table of Contents
Every skylight floor opening and hole shall be guarded by a standard skylight screen or a fixed standard railing on all exposed sides. Skylight screens shall be of such construction and mounting that they are capable of withstanding a load of at least 200 pounds applied perpendicularly at any one area on the screen.
How do you choose to cover the skylight quizlet?
How do you choose to cover the skylight? I cover the openings with material capable of at least twice the weight of the employees. Rank the items below from most important to least important in preventing the injury discussed in this case study (scaffolds).
Which of the following is generally accepted method of fall protection?
Generally, fall protection can be provided through the use of guardrail systems, safety net systems, or personal fall arrest systems. OSHA refers to these systems as conventional fall protection. Other systems and methods of fall protection may be used when performing certain activities.
What are the ways an employer can protect workers from falls answer?
What are the ways an employer can protect workers from falls? Guardrails, safety net system and personal fall arrest systems.
What is the primary reason for following fall protection requirements?
Why is fall protection important? Falls are among the most common causes of serious work related injuries and deaths. Employers must set up the work place to prevent employees from falling off of overhead platforms, elevated work stations or into holes in the floor and walls.
How do you choose to cover the skylight OSHA answer?
Administration (OSHA) The OSHA General Industry Standard requires that “every skylight floor opening and hole shall be guarded by a standard skylight screen or a fixed standard railing on all exposed sides” [29 CFR* 1910.23(a)(4)].
Which test should be performed on abrasive wheels?
Grinding wheels must be inspected and “ring-tested” before they are mounted to ensure that they are free from cracks or other defects. Wheels should be tapped gently with a light, nonmetallic instrument. A stable and undamaged wheel will give a clear metallic tone or “ring.”Jan 21, 2015.
What are the 4 types of fall protection?
All active fall protection for the construction industry falls into four basic categories: fall arrest, positioning, suspension, and retrieval. OSHA provides standards for each category of fall protection.
What are the three fall prevention systems?
Contents 3.7.1 Fall arrest system incorporating a lanyard and energy absorber. 3.7.2 Fall arrest system incorporating a lanyard and energy absorber on a horizontal line. 3.7.3 Fall arrest system incorporating a retractable type fall arrester.
What should a fall protection plan include?
What to Include in Your Fall Protection Plan State information about the job site. Assess the fall hazards on site. Outline the fall arrest or restraint methods and fall protection equipment being used. Outline the assembly, maintenance, inspection, and disassembly procedures for equipment being used.
What are some of the things your employer should do to prevent worker falls and accidents using portable ladders at the workplace?
The 3 keys to preventing falls from portable ladders are: Choosing the right ladder for the job. Tying the top and bottom of the ladder to fixed points when necessary. Keeping your hands free of carrying tools or other materials when climbing a ladder.
What is the proper safety guard for power saws?
An upper guard must cover the entire blade of the saw. A retract- able lower guard must cover the teeth of the saw, except where it makes contact with the work material. The lower guard must automatically return to the co vering position when the tool is withdrawn from the work material.
Do you need fall protection on scaffolding?
Fall protection on scaffolding is required at 10 feet. In addition to falls from heights, workers also can slip or trip on ground surfaces that are uneven or cluttered with debris.
What is the difference between fall protection and fall prevention?
The key distinction between the two types of products is fairly self-explanatory. Indeed, fall protection ‘protects’ seniors AFTER a fall, whereas fall prevention products attempt to prevent the fall from ever occurring at all. Sometimes, despite all of your precautions, falls still happen.
What size hole requires a cover?
Every floor hole into which persons cannot accidentally walk (on account of fixed machinery, equipment, or walls) shall be protected by a cover that leaves no openings more than one (1) inch wide. The cover shall be securely held in place to prevent tools or materials from falling through.
What is the most common primary fall protection system used by most workers?
On many sites, guardrails are the most common and convenient means of fall protection. Where guardrails cannot be used, workers must use another means of fall protection to prevent a fall. Two basic types of fall protection are travel restraint and fall arrest. Both involve wearing a full-body harness.
Can you walk on a skylight?
With its strengthened design and non-slip coating, the window ensures you can walk across its entire surface safely. The flush design feature provides usability of the roof and terrace. The optimized design of the flat roof window allows for installation of internal accessories for type “F” windows.
How many feet should warning lines be flagged?
All warning lines must be flagged with high-visibility material at no more than 6-feet intervals. from the walking/working surface and the highest point is no more than 39 inches from the walking/working surface.
Can you stand on skylights?
Some workers simply assume that skylights are designed to bear their weight and will intentionally stand or sit on them. Depending on the quality of the safety net or the weight of the victim, roof maintenance professionals can fall through just as easily as they would through a skylight.
What does D mean on an abrasive wheel?
D- Diamond. B- Cubic Boron Nitride. Z- Zirconium (metals) Second digit(s) (number)- Grain size.
How often should you carry out a visual inspection of an abrasive wheel?
Portable grinding machines fitted with an abrasive wheel and used on a construction site may require a PAT every three months. The Management of Health and Safety at Work Regulations 1999 require employers to assess risk and communicate relevant information arising from the assessment to employees.
