QA

Question: How Do You Calculate Board Feet

The basic calculation for board feet is: Thickness x Width x Length / 12 = Board Feet. 2 x 4 x 10 / 12 = 6.667 Board Feet. A 2 x 10 -16′ has 26.67 board feet: 2 x 10 x 16 / 12 = 26.667 Board Feet. PCS x T x W x L / 12 = Board Feet. 84 x 2 x 8 x 12 / 12 = 1,344 Board Feet. 1.25 x 6 x 14 / 12 = 8.75 Board Foot.

How many board feet are in a 2x4x10?

A 2x4x10 board has 6.66667 total board feet in it: the board foot factor (BFF) of a 2×4 is 0.666667. Multiply 0.66667 by the length of 10 which gives total board feet of 6.66667.

How do you figure out cost per board foot?

Here’s how to calculate the cost of your order: The number of square feet of a piece of lumber is calculated by multiplying the length (in inches) by the width (in inches) and then dividing by 144. Example: Calculating the total cost of a piece of lumber 6″ wide by 46″ long at a price of $6.30 per square foot.

What is 200 board feet in square feet?

A 600 board foot kit will cover 600 square feet at 1 inch thickness or 300 square feet at 2 inches thick; a 200 board foot kit will cover 200 square feet at 1 inch thickness, and so on.

How many board feet are in a 2x10x10?

ft. 2” x 10” x 1′ = 1.67 bd. ft. 2” x 12” x 1′ = 2.0 bd.

How do you calculate board feet in a calculator?

To estimate the board feet from a log, measure the average diameter of the smaller part of the log in inches. Then, measure the length of the log in feet. Move the scale’s marker over to where these two measurements meet. Where the two measurements intersect is the approximate board foot output.

How do you figure board feet of wood?

Board footage is calculated by multiplying the nominal thickness in inches (T) by the nominal width in inches (W) by the actual length in feet (L) and dividing by 12. The formula is: T x W x L = Board ft.

How do you calculate wood for a project?

TIP: To calculate board feet: rough standard thickness X actual width X actual length divided by 144. Use the thickness of the material you intend to start with, not end with. For example, the 3/4″ top will start from 4/4 lumber. The legs will start from 6/4 lumber.

How many square feet are in a 12×12 room?

How many square feet is a 12×12 room? The square footage of a room 12 feet wide by 12 feet long is 144 square feet. Find the square footage by multiplying the width (12 ft) by the length (12 ft).

How many sq ft is a board foot?

A board foot is actually a measure of volume. By definition, a board foot is one square foot, one inch thick. The most common mistake made in calculating board footage is forgetting to multiply by the thickness.

How many board feet are in a 4×8 sheet of plywood?

Find the square footage of each space and add together to find the total square footage needed. Divide by the total square footage by the square footage of a sheet of plywood to find the number of sheets required to cover the space. A 4×8 sheet of plywood is 32 ft2.

How do you calculate board feet in the Philippines?

The formula is (Width x length x thickness) / 144.

How do I calculate board feet in Excel?

Here is the relation: 1 board foot = 144 cubic inches = 1/12 cubic foot. Board foot formula = length * width * thickness. board foot = length(ft) * width(in) * thickness(in) / 144. board foot = length(ft) * width(ft) * thickness(in) / 12.

What is a board foot of lumber?

1. Hardwood lumber is typically sold by the board foot, a unit of volume equivalent to a board that is one inch thick, one foot wide and one foot long, or 144 cubic inches. These units refer to nominal or roughsawn dimensions, not surfaced dimensions.

How do you measure for wood?

Volume of Wood The cubic feet, or volume, of a cylindrical log is given by the volume of a cylinder V=πhr2. A log with radius of 2 feet and height of 10 feet would have a volume of about 125.66 cubic feet (or ft3).

How do you calculate board feet in inches?

How do you measure a board foot? Take a rectangular piece of lumber. Measure the length of it in feet, rounding to the nearest decimal place. Measure the width in inches. Measure the thickness in inches. Multiply all three numbers together and divide by 12.

What is the first step in solving board foot?

Calculate Board Feet with Board Feet Formula First, measure the length of the board in feet. Next, measure the width of the board in inches. Then, measure the count (board thickness) in quarters of an inch. Next, multiply width (inches) x length (feet) x count. Finally, divide the result by 12.

What is the difference between a board foot and a linear foot?

Linear feet (LF) is a measurement of length of a specific sized board. Board feet (BF) is a measurement of volume which the a Board foot is 1 foot by 1 foot by 1 inch thick volume. If you have any questions about how to go about the conversions or the units feel free to ask below in the comments or contact us.

How do you calculate wood material?

A single board foot is one square foot of wood that is one inch thick. You can measure board feet by multiplying length x width x thickness in inches, and then dividing by 144. If ordering a large amount by board feet, just multiply the total board feet needed by the price per board foot for the total cost.

How many boards do I need calculator?

To find the number of boards you need, divide the total deck square footage by the board square footage.

How do I calculate how much lumber I need for framing?

Multiply the total height and length of the wall to find the total area. Multiply the width and height of each opening to find the area. Subtract the area of the openings from the total area of the wall. Divide the result by 32.

How many square feet is a 14×12 room?

In the present case, the area of the room is 14×12= 168 sq feet.

How many square feet is a 10×16 room?

10×16 Sheds. Square footage: 160 sq. ft.