Table of Contents
Mulching mowers not only create a stream of air that directs the grass up into the mower blades, but once the grass is cut, the clippings hit the blade multiple times before they go back onto the lawn. This is in contrast to other mowers which direct the clippings out the side or into a bag.
Do mulching blades make a difference?
Mulching blades feature more curves and an increased cutting edge. The curved surface and increased cutting edge allows the blade to cut the grass and bring it into the deck where it is cut several more times before falling back onto the lawn in much smaller pieces.
Can you put mulching blades on any mower?
Q: Can you install mulching blades on any lawn mower? There are mulching blades available for most mowers, but not all mowers should have mulching blades installed. Underpowered models may not have the horsepower to spin a heavy mulching blade at an effective speed, providing mixed results when cutting and mulching.
How do you mow with mulching blades?
How to Cut a Lawn With a Mulch Blade Start at the top left corner of the lawn, and move down toward the bottom left corner. Mow the second row of lawn the same way as the first, mowing another outline inside the outer ring. Continue mowing in concentric circles or rectangles until you reach the center of the lawn.
Do mulching blades point up or down?
Look at both sides of the mulching blade. Most blades have the word “bottom” stamped on them, or they have a model number imprinted onto the underside. Whether a word or a number, that side of the mulching blade must face the ground after it is installed and the mower is standing upright.
Why does my mulching mower leave clumps of grass?
If your mower leaves clumps of clippings all over, it means two things. First, you’re mowing when the grass is wet. Second, you’re letting the grass get too tall between mowings. Mow frequently enough so that you never remove more than one-third of a the grass blades is a single cutting.
Can you use mulching blades with side discharge?
Mulching blades are sometimes called “all purpose” or “3-in-1” blades because you can use them to mulch, bag, or side discharge. Standard blades are called 2-in-1 blades because you can use them to either bag or side discharge the grass. Can I use my current mower to recycle my grass clippings? Yes.
Can you use mulching blades with a bagger for leaves?
Depending on whether you’re using a walk-behind mower or a lawn tractor, using a mulching blade for bagging is not the best idea. A bagging blade has a bend or wing at the back to create more airflow to send the grass to the bag. Using mulching blades for bagging will result in reduced bag filling. Aug 10, 2014.
Are high lift blades good for mulching?
Lifting blades come in three types: High-Lift, Medium-Lift, and Low-Lift. Essentially, the greater the lift, the more horsepower that’s required. You would use High-Lift blades when tackling taller, more dense grass (High-lift = higher-lifting airflow). You should not use Lifting blades for mulching.
What is better for your lawn bagging or mulching?
Many lawn care professionals prefer to bag grass clippings during mowing for a crisp, clean look. Mulching grass clippings provides more nutrients for your soil. As they break down, the clippings will release nitrogen, potassium, and phosphorus.
Why does my lawn mower cut better backwards?
When a gas powered lawn mower runs in reverse, its blade continues to spin in the same direction as it would if the mower were operated in the forward gear. Blade sharpness issues, therefore, can be discounted in powered mowers.
How do I know what mulching blade I have?
The easiest way to tell the difference between mulching and standard lawn mower blades is to look at their shape. A standard blade will have fewer cutting edges and a straight shape, while the mulching blade will have several cutting edges and a curved shape.
How long do mulching blades last?
Depending on your usage lawnmower blades can last at least 200 hours or longer. If the grass is unevenly cut, or a hard object is hit check the condition of the blade. Mower blades normally need to be sharpened every 25 hours, but when the blade is damaged it needs to be replaced.
Does a lawn mower blade spin clockwise or counterclockwise?
Most lawn mower blades rotate in a clockwise direction (counter-clockwise when viewed from below), and as such have the cutting edge on the right side. If you are unsure of how your mower rotates, check the position of the discharge chute; if it is on the right side angled back, the blade turns clockwise.
Which is the cutting side of a mower blade?
To determine which side of your lawn mower blade is up, first figure out which side is the sharp cutting edge, and which side is the blunt edge. Look for a sticker indicating which side goes up and which side faces downward. The cutting edge should face the grass while the dull edge should face the deck of the mower.
