Table of Contents
How does the Lazy Susan work ? The Lazy Susan rotates on a set of bearings, making everything on the tray or shelf easy to reach with a simple spin.
How Lazy Susan bearings work?
How does a lazy susan bearing work? When just one lazy susan bearing is used, all of the force is centered on one point (F1). This can damage the balls that allow for rotation. By adding a second bearing, the force is more evenly distributed (F1 and F2), and the bearing isn’t damaged by the imbalance of weight.
How do you spin a Lazy Susan?
Drill a pilot hole, then screw in small, Flat head screws that fit the Lazy Susan Hardware holes and AREN’T too long for the wood you are using on top. Once you have the first screw in place, carefully spin the hardware to line up for the next screw. Repeat everything from step 4 to attach the last 3 screws.
How do Lazy Susan cabinets work?
A lazy Susan consists of two or three shelves that rotate around a center pole, which, if not properly aligned, can prevent the doors from closing or the shelves from smoothly rotating. Slide the shelves down the pole and allow them to rest on the floor of the cabinet.
What do you do with Lazy Susans?
On a Kitchen Island or Cabinet Top Punctuate your island or your kitchen countertop with a lazy susan on which you can store cooking utensils, tea towels, spices, or oils. With a spinning unit, there is no hard-to-reach row in the back; often-used items can now stay close at hand.
How do you lubricate a lazy Susan?
Lubricate the bearing balls with a small amount of heavy oil or grease. Mount the bearing on the selected center of the base using #6 wood screws.
How big of a lazy susan bearing do I need?
Wood Lazy Susans: How to Size Guidelines Lazy Susan Diameter Table Width (round) Table Width (rectangular/square) 18-24″ 45-52″ 48-52″ 24-28″ 52-60″ 54″ 36″ 66-72″ 72″ or more If a bigger size is required, use the above as a guide.
How do you seal a wooden Lazy Susan?
Seal & Add Hardware With the turntable attached, use a sponge brush and water-based polyurethane to seal the wood round. Once it’s dry, attach hardware.
Who invented lazy Susan?
Elizabeth Howell.
How thick should a lazy susan be?
I generally advise people to leave about 14″ to 18″ for place settings. So if the table is 48″ wide and you are going to use 16″ for place settings, the Lazy Susan can be 16″ in diameter.
How do you balance a lazy susan cabinet?
In some cases, this can be solved by adjusting lazy Susan cabinet door hinges. Loosen the bolt. Move the adjusting rod. Loosen the screws. Lift the shelves to finish adjusting the shelf position. Tightening the screws. Remove the retaining clip to improve top and bottom clearance 2. Turn the adjustment wheel.
How do you organize a lazy susan cabinet?
Tips to remember when organizing Lazy Susans: Round containers work well with the curve of the space. The use of containers keep everything from tipping over and getting lost in the back. Store stuff where you use it. Store frequently used stuff on the top shelves.
Do Lazy Susans save space?
A must-have staple of every pantry should be a Lazy Susan. These can be used for anything that stands up (or has a bottom): drinks, oils, cans, spices, etc.. They are a great way to utilize corners efficiently as well as keep straight shelf space tidy.
How do you organize a Lazy Susan for pots and pans?
11 Simple Ways to Organize Pots and Pans Like a Pro Hang them overhead. Hang them on the wall. Hang them on the side of your cabinet. Hide them in the cabinet corner. Use a pegboard. Put them inside a drawer. Install a sliding pot rack inside your cabinet. Invest in a roll-out organizer.
Why do they call them lazy Susans?
Thomas Jefferson invented the Lazy Susan in the 18th century, though they were referred to as dumbwaiters at that time. It is said that Jefferson invented the Lazy Susan because his daughter complained she was always served last at the table and, as a result, never found herself full when leaving the table.
Why do Chinese restaurants have Lazy Susans?
All three devices were used in Europe and America to save domestic labor during meals. Basically, the idea was to buy a “dumb-waiter” so you could layoff your real waiter. This means that a century ago, the name Lazy Susan had nothing to do with Chinese food.
How did Lazy Susans get their name?
WiseGeek reports that the name was thought to have been given to it in honor of either Thomas Jefferson or Thomas Edison’s daughter. The report states that it was initially thought that Jefferson invented a tool like the lazy Susan because one of his daughters would complain about being served last at the dinner table.
How much room does a lazy susan need?
Most cabinet lines offer either a 33” or 36” lazy susan. That means it will take up 36” of space on each wall. A lazy susan offers the most functionality from the corner with the least dead space. It’s easy to install and plan around since it takes up the same amount of space on each wall.
