Table of Contents
Fortunately, you can get measurements in three simple steps: Measure the inside of the window frame in three places for width: across the top, middle and bottom. Measure for height: at the left, middle and right side. Measure the depth of the window so you know how deep the blinds can be.
What size blinds do I need for a standard window?
Standard window slat widths are ½ inch, 1 inch and 2 inches. Window treatments with wide slats are ideal for deep windows, while window treatments with narrow slats generally complement shallow windows. If you want to enhance the look and feel of a large window, choose custom window treatments with wider slats.
How much smaller should blinds be than the window?
Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame. Need Mini Blinds?Jun 25, 2021.
What are standard blind sizes?
The standard sizes of window blinds ought to match these and can be found in most stores: Picture windows: 1–8 feet high, 2–8 feet wide. Double-hung windows: 36–72 inches high, 24–48 inches wide. Sliders: 24–60 inches high, 36–84 inches wide.
Are blinds supposed to cover trim?
While inside-mounted blinds provide good coverage, some gaps may remain on the side of the blinds as the blinds don’t cover the window trim. Outside-mounted blinds provide better coverage as they cover the entire window frame and thereby, the chances of any gaps existing on the sides become very low.
Do blinds have to fit exactly?
Shades and blinds must fit precisely to a window’s measurements only if they are installed inside the window frame or opening. If the shades are installed outside of the window opening — called an outside mount — the shades typically are wider than the window by a few inches and can also be longer than the window.
How do I measure a window?
Measure the height from the head of the window (top fixed-frame piece) to the windowsill (bottom fixed-frame piece) As with the width, take three measurements: down the left side, right side and the middle. Record the shortest measurement — this ensures that the new window will fit.
How much space do you need on each side of blinds?
Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
What are standard window sizes?
Widths can be 2 feet, 3 feet, 4 feet, 5 feet, 6 feet, and 8 feet. Standard heights can range from 2 feet tall to 8 feet tall, with additional heights of 18, 52, 54, and 62 inches. Rough openings are in whole numbers, while 1/2 inch is taken from each rough opening size to get the actual window size.
How are curtains measured?
Curtain measurements are always written with the width first and then the length. For example, a panel that is 46″ x 54″ is 46 inches wide and 54 inches long. Don’t buy your curtains just so they’re big enough to cover a window.
Should blinds go inside or outside the window?
If you’re installing blackout window treatments to block unwanted light, then you should use outside mount blinds. Mounting blinds outside the window frame will give you more light coverage than blinds that hang from the inside.
Should blinds be flush with wall?
1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
What length should blinds be cut?
Typically, a set of inside-mount blinds should measure about 1⁄2 inch (1.3 cm) less than the width of the window frame. Make sure you measure the inside of the frame, where the blinds actually fit, and not the entire window frame. Measure in at least three places — the top, bottom, and middle of the window.
How do you measure a replacement window?
Measure from the high point of the sill of your window (the surface closest to the inside of the window) to the top of the window opening. Make three measurements: one at the left side, one at the center and one at the right side of the window. Use the smallest of these three height measurements to order the window.
How do you measure a window for a room?
1) A given room must have a window or glass door that is sized to equal at least ten percent of the floor area of the room. So, if a room is 10 feet wide x 12 feet long, then the room area would be 120 square feet and the minimum size of the window in that room would have to be12 square feet.
Should blinds touch window sill?
Generally, blinds are usually fitted within a window recess and are fitting so that they touch or sit just above the window sill.
What widths do mini blinds come in?
Window Width 23 Inch Wide. (92) 36 Inch Wide. (80) 29 Inch Wide. (76) 31 Inch Wide. (76) 35 Inch Wide. (76) 30 Inch Wide. (75) 34 Inch Wide. (72) 24 Inch Wide. (71).
How do you measure a double window for blinds?
For two (2) separate blinds in one window, take the smallest width and divide it by 2. (The factory will deduct 1/8″ – 1/4″ from each blind.) For three (3) blinds in one window, repeat the same steps. Then add 1/8” to the width of the left and right blind.
Does Home Depot cut blinds length?
Once you have properly measured, bring your measurements in to the store. Our associates can cut your in-store bought blinds to the exact size needed, for free.
What is the standard bedroom window size?
The most common window size or average bedroom window size is 24×36. All common window sizes & dimensions for fixed, standard & double-hung windows can differ on manufacture.
How wide should outside mount blinds be?
Outside Mount To minimize light leakage and ensure privacy the blind should overlap the window opening by 4″ on each side for a total of 8″ on entire width.
