Table of Contents
A toilet tank’s height is measured from the floor to the top of the toilet tank. Place the end of the tape measure on the floor, and take the measurement at the very top edge of the tank lid. Toilet bowls and seats are either round or oval.
How do you measure a toilet tank?
Measure from the floor to the top of your toilet seat. Then measure from the floor to the top of your toilet’s tank to make sure your new toilet can fit into the same space or under any an over-the-toilet storage racks that you do not want to get rid of.
Are toilet tanks a standard size?
Tanks come in a few different sizes, and one of them is small. Small tanks vary in size; however, one standard length is 15 1/8 inches. It is common to see these tanks on toilets with bowls and seats of a similar size.
Will any tank fit any toilet?
When asking the question is a toilet tank universal, the short answer is no. While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model. When looking to purchase a new tank, you need to learn the measurements and model number.
How do I choose the right toilet tank?
Measure and write down its length, width and depth, as well as the thickness of the walls. Measure the size and dimensions of any pipes, like the overflow pipe, to make sure that the fittings of the new tank will precisely match the fittings of the rest of the toilet.
How wide is the back of a toilet tank?
The general rule of thumb for standard toilet sizing is between 27 and 30 inches deep, the back height is usually between 21 to 31 inches and the width is about 20 inches.
What is the smallest toilet you can get?
Tiny Bathrooms Julius Compact Toilet. The Julius toilet from Tiny Bathrooms is one of the smallest standard-plumbed toilets on our list. It has a depth of just 24 inches, is 14.25 inches wide, and stands 27 inches tall. If you don’t want the noise of a macerator, it’s about the most compact loo out there.
Are all toilet tank lids the same size?
EVERY toilet tank lid is unique and there isn’t any other in the world exactly the same because porcelain tank lids shrink a lot and all warp slightly while being fired in a kiln at high temperatures. For the most common toilet tank lids we do charge less than most.
Can you mix and match toilet bowls and tanks?
There are a few models that can interchange tanks and bowls, but most are configured to work as a set, as indicated in our product showcase. If you mix and match yourself, the toilet may not flush at all. Tanks and bowls can not be mixed.
Can I replace a toilet tank only?
Replacing a toilet tank is a task most homeowners can do without a call to the plumber. Because the tanks and bowls may be sold separately, you can often buy just the tank. However, it is important to match the toilet manufacturer and model to ensure proper installation and function of the toilet when you’re done.
How much does a new toilet tank cost?
Tank. A replacement tank will range from $50 to $100, not including the labor to install it. A professional plumber can put in a new tank in 1-2 hours for a total cost of $45 to $300.
Are toilets universal?
As far as the overall size of toilet itself, getting the proper rough will allow the toilet to fit the space. Toilet sizes vary beyond the rough though. Round bowls don’t project out as much as elongated, and then there are variations within the round and elongated categories as well.
How much is a new toilet?
The cost of a new toilet ranges from $90 to $1,500 or more, depending on the brand and type of toilet you choose, as well as the extra features you want.Cost of Toilet by Type. Type of Toilet Average Cost* Typical Range Wall Mounted Toilet Installation $675 $150 – $1,200 Dual Flush Toilet $350 $200 – $500.
Which is better 1 or 2 piece toilet?
Performance-wise, there is no difference between the one-piece and two-piece toilets. They can have the same flushing power and efficiency. The interior parts are almost identical if they are from the same manufacturer. They may even have the same features and specifications.
Is 1.6 or 1.28 toilet better?
So, what is the difference between 1.28 GPF and 1.6 GPF toilets? A 1.28 GPF toilet uses 1.28 gallons of water per flush while a 1.6 GPF toilet uses 1.6 gallons per flush. 1.28 GPF toilets are therefore more water efficient than 1.6 GPF toilets but none is necessarily better at flushing than the other.
How do I know if my toilet is 10 or 12?
Take the cover off of the toilet tank, and lay the toilet on its side to access the underside of the base. Measure from the back edge of the base to the center of the closet hole, or drain hole. Note if the measurement is 10 inches or 12 inches.
How much space is required in front of and beside a toilet?
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
How high is a standard toilet?
Standard toilet height is around 14 1/2” from the floor to the bowl rim, without a toilet seat. In recent years toilet bowl height has increased to assist people with sitting and standing up, for the benefit of taller people, and those with physical handicaps and/or the elderly.
How deep is the top of a toilet tank?
Although toilets range in size, most fit standard dimensions between 28 and 30 inches deep, about 20 inches wide, and between 27 inches and 32 inches high. The distance to the top of the toilet seat is between 15 and 17 inches from the floor.
