Table of Contents
Charging your Ember The Ember Mug² will display a pulsing red light when it is charging and turn solid green when fully charged and ready for use. The Ember’s exact battery life can be viewed at any time within the ‘Settings’ section of the Ember app.
How long does it take for Ember Mug to charge?
Charge Time: Once your Ember Mug has an empty battery, place the mug on the charging coaster for approximately 2 hours for a full charge.
What do the lights on Ember Mug mean?
Attached you’ll find a list of what each LED color means if displayed on the Ember Mug. Color Light Index. SOLID RED – Ember has low battery and will be unable to maintain the set temperature. PULSING RED – Ember is charging on the plugged in charging coaster (Ember must be empty) SOLID GREEN – Ember is fully charged.
Does the Ember Mug need to be turned on to charge?
1. Plug In Charging Coaster and Turn On. The first thing you need to do is to plug in your charging coaster and turn it on. Without electricity there is going to be no way to charge your Ember Mug and currently the charging coaster is the only way to charge the mug.
How do I know if my Ember is on?
Simply press and hold the Ember logo for 3 seconds to turn on the Ember Travel Mug. You’ll know it’s powered on when you see the “HELLO” text appear towards the bottom of the cup. You can also press the Ember logo to toggle between temperature settings, current temperature and battery power.
Does Ember heat while charging?
If you are keeping your beverage hot while using the coaster, it can maintain your perfect temperature all day!* When Ember is on the charging coaster the battery will stay at a constant level and will not charge any higher until your Ember is empty or is powered off.
Does Ember Mug heat while charging?
Yes, the Ember Mug will continue to heat drinks while charging. As long as the battery is below the regulated max temperature it’ll both charge and heat your drink at the same time. Charging will be slower than if you were charging it whilst it was of.
Why does my Ember Mug say heater off?
The Ember can read as empty or stop heating for a few reasons: The Ember is searching for a drastic temperature change, and when cooler liquids are poured in, it may be unable to detect the liquid and will detect as empty as a result.
Does Ember Mug turn on automatically?
Ember also took the auto sleep and wake features that it introduced with the original Ember ceramic Mug and brought them to the Travel Mug 2, meaning that it’ll turn itself on and off automatically depending on whether it detects liquid inside, or motion from being picked up, to extend battery life even further.
Why is my Ember Mug flashing red?
Pulsing Red You Ember Mug will pulse red when it’s plugged into it’s charging coaster and is charging. This means you mug isn’t fully charged but it’s on it’s way there and soon enough you’ll see a solid green light indicating your Ember Mug is fully charged.
Why is my Ember not connecting?
Turn the bluetooth OFF on your mobile device from the bluetooth settings. After doing so, please allow at least 30 seconds in the OFF state before proceeding to turn ON the bluetooth connectivity. The factory reset will remove all possible corrupt data that is preventing bluetooth connection.
How long does an Ember Mug stay warm?
Our smart mug allows you to set an exact drinking temperature, so your coffee is never too hot, or too cold. Ember then maintains your chosen temperature for up to 1.5 hours with the Ember Mug² 10 oz and up to 80 minutes with the Ember Mug² 14 oz – so your hot beverage stays perfect.
How do I reset my Ember Mug?
To reset the Ember, press and hold the power button on the bottom of the mug for about 15 seconds. The Ember’s LED will first blink blue, then yellow, then red to indicate it is being reset.
How do I turn my Ember heater on?
Power ON – Press the power button located on the bottom of the Ember Mug or Ember Mug². You will see the LED illuminate a white light. Power OFF – Press and hold the power button for 3 seconds until the LED dims to an OFF state. *Note: To make sure the mug is OFF you can pick it up to see if the white light shows up.
How does Ember know its empty?
Why Does Your Ember Mug Say Empty? EMPTY: Displayed when the thermal sensors are not recognizing a change in temperature present in the inner vessel. This notification may also show if liquid is not present or the temperature rapidly decreases (caused by adding cold creamer).
How does Ember Mug know its empty?
The Ember Mug has four temperature and liquid detection sensors built directly into it. This allows the mug to automatically turn itself off when it senses that it’s empty, preserving whatever batter it has remaining. It can also automatically turn itself on the moment a liquid is added.
How do I change the battery in my Ember Mug?
Ember Mug Battery Replacement: Can It Be Done? You cannot buy Ember Mug battery replacements and the base of the mug is molded closed and the battery cannot be accessed without destroying the mug. No, Ember does NOT offer replacement batteries for sale for their mugs.
