Table of Contents
If the problem isn’t resolved Turn off the power and unplug the power cord. Wipe the right and center paper feed rollers inside the rear tray with a moistened cotton swab. Rotate the rollers 2-3 times while wiping. After cleaning the paper feed rollers, turn on the power, then clean the paper feed rollers again.
Why is my printer not grabbing the paper?
The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.
How do you clean the rollers on a Canon printer?
Solution Prepare the printer. Remove all sheets of paper from the rear tray. Open the printer driver setup window. Click Roller Cleaning on the Maintenance tab. The confirmation message appears. Execute paper feed roller cleaning. Make sure that the printer is on and click OK. Complete paper feed roller cleaning.
Why is my Canon printer not grabbing the paper?
Check6 Make sure that there are not any foreign objects in the rear tray. If the paper tears in the rear tray, see Paper Jams to remove it. If there are any foreign objects in the rear tray, be sure to turn off the machine, unplug it from the power supply, then remove the foreign object.
Why is my Canon printer not picking up paper?
If the problem isn’t resolved Turn off the power and unplug the power cord. Wipe the right and center paper feed rollers inside the rear tray with a moistened cotton swab. Rotate the rollers 2-3 times while wiping. After cleaning the paper feed rollers, turn on the power, then clean the paper feed rollers again.
Why does my Canon printer keep saying load paper?
If the paper cassette or multi-purpose tray is empty, the message <LOAD PAPER> appears on the display. Check if the paper is properly loaded in the paper cassette or multi-purpose tray. For the instructions on how to load paper, see “Loading Paper into the Paper Cassette” or “Loading Paper in the Multi-Purpose Tray.”Sep 6, 2011.
Why is my stuff not printing?
First, make sure the printer is on and has paper in the tray. Next, check to make sure the printer cable is properly connected to both the computer and the printer. If you still can’t print, check to make sure the printer is not set to offline mode. Go to Start, Printers and Faxes.
Why is my printer eating the paper?
If your printer keeps jamming, you should know that the most common cause of a jam is misalignment of the paper. Paper needs to load in smoothly, completely flush with the tray. Overfilling the tray is a great way to ensure you will be spending some personal time getting to know the inside of a printer.
How do I fix my Pixma paper jam?
Solution Turn off the printer and unplug it. Retract the paper output tray and open the cover. Important. Check if jammed paper is under FINE cartridge holder. Hold jammed paper firmly in both hands. Slowly pull out paper, so as not to tear it. Make sure all jammed paper is removed. Close cover.
How do you clean a paper feed roller?
Clean each roller using a clean lint-free cloth lightly moistened with water (distilled water preferred). Rotate the rollers to clean the entire surface. Verify that the paper feed rollers on the rear access door are clean and rotate easily.
How do I clean my Canon feeder?
Cleaning the Feeder Turn off the machine and unplug it from the power outlet. Open the original supply tray. Open the feeder cover. Wipe the rollers in the feeder. Close the feeder cover and original supply tray. Open the feeder. Wipe the document feed scanning area. Wait for the cleaned area to dry completely.
How do I clean my Canon printer feeder?
Cleaning the Feeder Turn OFF the power switch and disconnect the power cord. Open the feeder cover. Clean the rollers (A) inside the feeder with a well wrung out cloth dampened with water and wipe them with a soft, dry cloth. Close the feeder cover. Connect the power cord and turn ON the power switch.
Why does my Canon mg3620 keep saying out of paper?
If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly. In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only when necessary. Make sure that the power is turned on and remove any paper from the front tray.
Why does my printer says ready but won’t print?
Switch your printer’s USB cable to another port of your computer. Sometimes the USB driver doesn’t work properly, so it’s time to reinstall the USB drivers. Go to the device manager and uninstall all the USB drivers from there and reboot your computer. After rebooting, your printer should detect your printer properly.
Why is my printer not printing when the ink is full?
There are numerous possible causes for a printer that’s randomly producing blanks. The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles. Driver and software issues can sometimes cause this problem as well.
Why is my printer not printing black when ink is full?
Check if the vents of the cartridges are clogged. Try using a different ink cartridge to determine if your printer is able to recognize cartridges. If your printer used to work with an old cartridge, try installing that old cartridge again and see if your printer produces any sort of output–any shade of gray will do.
How do you clean pickup rollers?
Clean the Paper Pick-up Rollers (1) with a soft lint-free cloth moistened with water. Slowly turn the rollers so that the whole surface is cleaned. After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture.
