Table of Contents
On locking the door, key locks work by turning the cylinder. Once the cylinder is turned, it releases the spring to push the latch in a closed position. The right key is also used to trigger the inside door lock mechanism to unlock the door. Once inserted in the keyway, the key will align the pins.
What is inside a door lock?
The main parts of a door lock are the cylinder, bolt, box and strike plate. It’s useful for any DIY-er to know how things around the home operate. Diagram showing the parts of a door lock, including the knob, rose, cylinder, latch assembly, bolt and strike plate.
How does a bedroom door lock work?
Generally speaking, there are two types of locks that are used for bedroom doors or interior doors. The first type uses a push-in button in the knob to lock the door from the inside. The second type of lock uses a twist-button that is turned right or left to work.
How does a lever door handle work?
How do door levers work? When the handle is turned, a square shaped spindle (a thin metal rod) inside turns. This rotates a cylinder, which is connected to the latch bolt that keeps the door closed. As it turns, the latch bolt is withdrawn into the door, allowing it to open.
How does a deadbolt lock work?
How does a deadbolt lock work? Because deadbolt locks operate without the use of a spring, simply turning a key retracts or extends the bolt into the strike plate on the door frame. Thanks to the strong locking mechanism, deadbolts offer an extra layer of resistance and strength compared to other locking mechanisms.
What is the plate behind a door knob called?
Trim: Sometimes called a rose, the trim is a decorative plate attached to the door under the knob or lever.
What is the door lock mechanism called?
The Turnpiece: Also called the tailpiece, this is the part of the locking mechanism that extends through the door from the cylinder on the outer key. The thumb latch connects to this piece of the deadbolt allowing the user to operate the lock.
How does bathroom door lock work?
Both ‘privacy’ door handles and ‘bathroom’ door handles have a thumb turn knob on the handle that is fitted to the inside of the door. If you have a ‘bathroom’ handle then turning the knob will operate the dead bolt in the bathroom mortice lock sending it across the door and into the strike plate in the door frame.
How do you know if a lock is left or right-handed?
Determine the handing of your door by standing on the outside of the door. If the hinge is on the right, it’s a right handed door, and you need a right handed lock. If the hinge is on the left, it’s a left handed door, and you need a left handed lock.
Are door locks reversible?
Any key-in-knob or deadbolt lock can be easily reversed if it has been installed improperly or you need to change the direction of the keyhole for any reason.
Are door knobs reversible?
Reversing a doorknob is a simple task you can complete in just a few minutes. With the turn of a couple screws, you can turn the knob around to keep kids or pets from accidentally locking themselves in a room.
What is a reversible lock?
Definition of reversible lock : a lock that may be applied to a door opening in either direction or hinged to either jamb.
What is the difference between a deadbolt and a deadlock?
Well, deadlocks and deadbolts are the same in that they both need a key to lock. However, while a deadlock can only be unlocked in deadlock mode with a key, deadbolts can be locked and unlocked with a key and have a metal lock that extends from the door into the wall.
What does a deadbolt lock look like?
Deadbolts are thicker and heavier than spring latches, and they are not rounded or angled at the end. They are normally comprised of steel, bronze or brass, and they extend deeper into the door frame–typically about one inch–than spring latches.
What is the extra pin on a door latch?
“Deadlocking plunger” (also called “deadlatch plunger” or “deadlock plunger”) is the name of a very important piece of a door lock assembly; it keeps a locked door from being opened with a small screwdriver or credit card.
What is a door latch set?
The latch is the mechanism that slides into the enge of the door and retracts or protrudes with the turn of the door knob. The latch keeps the door closed and when the knob is turned allows the door to open.
What are door catches?
The door catch is a fitting to keep a closed door at a normal position and not to naturally open due to a wind pressure.
How do you fix a lock that won’t turn?
If the key won’t turn in the door lock, the problem could be dirt or dust in the cylinder causing the pins to be stuck in a partially raised position. If that’s the case, it may be an easy fix. You can spray dry lubricant into the keyway and then insert the key a few times to get the lubricant working.
