Table of Contents
These mechanical rods operate by using small clips that move along a track that is embedded in the rod itself. This allows the curtain or drape to move smoothly along the rod and prevents any snagging that may happen with traditional curtain rods.
How do drawstring curtains work?
The draw cord is attached to master carriers that move when the cord is pulled, carrying the drapes with them. For the traverse rod to work, the pulleys must operate with every pull of the cord.
How does a drapery pull rod work?
A drapery puller is a long rod that is used to pull or push draperies open or closed. You simply hold one end in your hand, and the other up at the top of the draperies, then simply slide the drapery back and forth along the rod with the puller.
What is a curtain draw rod?
Attach the rod to the hook at the top of the curtain to draw the curtains without touching the fabric keeping them soil free and long lasting.
How do adjustable curtain rods work?
Most tension rods are adjustable in length within certain dimensions. You can extend the rod so that it fits as tightly as possible between the two walls. Most rods come with rubber tips on either end to protect your walls from scraping. They are very much like shower curtain rods and work under the same principle.
How do you draw string curtains?
Material. Measure the length of the window. Ribbon. Cut ribbon or a similar-colored cord to use as the drawstring. Pinned Seams. Sew down the side seams of the curtain. Seams. Sew your first top seam. Threaded cord. Sew the ribbon to one end of the curtain, and use the other end as a drawstring.
How do you make a curtain pull rod?
Get Organized! Step 1: Drill Pilot Hole in Dowel Rod. Using a drill bit that is slightly smaller than your screw eye/cup hook, drill a hole in the top of dowel rod. Step 2: Attach Cup Hook/Screw Eye to Dowel Rod. Insert the screw eye/cup hook into the pre-drilled hole. Step 3: Hang on Curtain Rings.
How long should a drapery wand be?
Their length is determined by the mounting height of the drapery in a room and whether that room is ADA complaint. Typical batons are specified to hang 60” off the floor, while ADA batons should be no higher than 48” above the floor.
What are curtain pulls?
Curtain pull wands and batons allow you to easily and quickly improve the functionality of any window treatment. Instead of tugging on the fabric of your curtains when you want to pull them open or close them up, you can pull a simple wand that slides the curtains into place smoothly.
Can you use a shower tension rod for curtains?
1. Window Treatment. We’ll start with the most obvious, which is using a shower rod as a window treatment. You don’t have to use it just as a make-shift curtain rod, although they are perfect for hanging or laying curtains when you don’t want to make holes in your walls or windows.
How do I make my tension rod stay up?
The caps on tension rods are often made of plastic, but even rubber ones are so incompressible that moist, smooth surfaces such as tile or fiberglass can’t hold them. You can fix that by gluing rubber shelf lining material to the ends with strong glue – two-part epoxy or contact cement.
How much weight can a tension rod support?
A tension rod can hold between 10-45 pounds, depending on its material. However, the average tension rod can handle about 20 pounds. Whether you want to suspend curtains or clothes, a tension rod makes an excellent addition to your home.
What are Pull String curtains called?
Traverse curtain rods with a cord allow you to open and close curtains to your heart’s content.
How do you fix a drawstring curtain rod?
Remove the Curtains and the Rod Remove the Curtains and the Rod. Take the curtains off the pin carriers and take remove the rod from the brackets, recommends the Curtain Company. Analyze the Pulleys and Cord. Look at the pulleys in the end of the rod. Lay Down the Rod on a Surface.
How do you put a glider on a curtain track?
A good way of spacing your gliders and ensuring you have enough prior to adding them to your curtain track is to lay your curtains on the floor or any flat surface. You can then place the gliders just above the curtains allowing you to space them out evenly and count the number of gliders needed along your track.
What are non grommet curtains called?
Rod pocket curtains, also called pole top or casement curtains, are a classic, and classy, way to hang drapery. A casing sewn onto the back of the curtain panel at the top allows the rod to slip through unseen. Panels bunch in gathers on the rod for a soft look with clean lines.
How long can curtain rods go without support?
Having said that, a 2 inch or 3-inch diameter pole can span a distance up to a full 12-feet without flexing or bowing using only two end brackets.
What can I use instead of curtain rings?
Unique Ways to Hang Your Curtains Make Your Curtain Hardware. These ideas are just a start. Coat Hooks. Brass or metal coat hooks can be attached above your window to hold curtain panels. Glass or Brass Door Knobs. Spoons. Belts. Clothespins. Wire.
How far should a curtain rod extend past window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
