Table of Contents
Ceramic disc cartridges are simply two ceramic discs with holes through them. One disc is fixed in place whilst the other moves with the tap handle. When both discs are in alignment, the water is allowed to flow through the tap. When they are no longer aligned, the water stops.
Are ceramic disc taps any good?
Plumbing connections for ceramic disc are no different to other taps, and with that comes all the ease of a quarter-turn technology, and a more durable, longer lasting tap without those annoying leaks. From a long-term maintenance point of view, ceramic disc taps are much better than normal taps.
Do ceramic disc taps wear out?
Ceramic disc taps are designed to last a lifetime. Unfortunately, in hard water areas they do not and it is as well to know how they operate and how to service them. It is very rare for the ceramic discs to wear out and the need to replace them is even rarer.
How long do ceramic disc taps last?
How Long Do Ceramic Disc Cartridges Last? A lifetime. But it depends on the hardness of your water (contact your water provider), and the quality of the tap itself. A cheap tap, even with ceramic discs, is going to wear down over time.
Can ceramic taps be repaired?
Ceramic disk faucets are durable, but need repairing if they develop leaks or water flow problems. To fix a ceramic disk faucet, you can get new seals and replacement parts. Disassemble the faucet and take the old parts with you when you go shopping for replacement parts so you can get exactly what you need.
What causes a ceramic disk faucet to leak?
If the faucet leaks, the culprits are usually the inlet and outlet seals. When repairing a disc faucet, the handle should be on in the on position.
How do you fit ceramic taps?
How to Install Ceramic Disc Taps Step 1: Turn Off the Water Source. First things first. Step 2: Drain Your Pipes. Step 3: Remove the Old Tap Washer. Step 4: Prepare Your Ceramic Disc Tap. Step 5: Disassemble Your New Tap. Step 6: Separate Locking Nut. Step 7: Screw in the Ceramic Cartridge. Step 8: Place the Fiber Washer.
Why does my tap drip after I turn it off?
The faucet valve (working parts) is housed in the handle and controls the on/off, volume, and temperature control. Over time, a faucet valve can lose its ability to make a water-tight seal, so water will drip out even in the off position.
Why do tap cartridges fail?
What is a ceramic disc cartridge? It is not usually the ceramic tap cartridges themselves that fail, however, as these tap cartridges are incredibly durable and designed to last a lifetime. Rather, it is the inlet or outlet seals falling apart or the build-up of sediment within them that creates leakages.
How long do bathroom taps last?
Most generally last for 15-20 years. If yours is nearing the end of its lifespan, it might be time to consider a replacement. If your faucet constantly needs repairs. One of the most common signs that it’s time to replace your faucet is when it needs constant repairs to function.
How long do tap spindles last?
‘ Tap washers can last a long time, but sometimes they can only last 12 months or less. You know your tap washers need replacing when the taps are turned off and the faucet still drips. Or if the water won’t turn off – which is a sign that the tap washer has been completely stripped and no longer seals on the tap seat.
How do you fix a disc faucet?
remove decorative cap and lift out cylinder. Remove the Cylinder. remove neoprene seals and check for debris or wear. Check for Debris, Damage or Wear. lift out old cylinder and drop in replacement. Replace the Cylinder. Reassemble the Faucet.
How do ceramic faucet valves work?
Ceramic Disc Valve. The newest type of faucet valve is the ceramic disc valve. This innovative valve design incorporates two rotating discs made from ceramic. The discs contain channels that align when rotated, which allows water to flow and control over temperature settings.
How do you install new taps?
Turn Off Your Water. First, you need to turn off the water supply for both hot and cold taps from the mains supply. Remove Your Old Tap. Get under your basin and unscrew the nut that locks the basin to your old tap. Install Your New Tap. Connect Your Plumbing. Switch Your Water Supply Back On.
How do you descale a shower valve?
Remove handle and trim piece from the front of the valve body. With channel lock pliers, unthread the cartridge and remove from the valve body. Soak the cartridge in white vinegar for an hour. Remove and rinse thoroughly with water.
How do you descale a tap cartridge?
Soak the cartridge in the water and vinegar mix for around 10 minutes. If when you take it out, the cartridge still has limescale on it, it simply needs to be soaked for longer. Add a little more vinegar to the mixture, soak a cloth in it and wrap it tightly around the cartridge.
How do you remove a grub screw from a mixer tap?
Turn the grub screw clockwise slightly with either an Allen wrench or flat-head screwdriver, depending on the screw. When the screw moves, turn the screw counterclockwise to remove it from the part. The movement clockwise, as if tightening, sometimes breaks the seal any rust may have on the screw.
How do you remove a vandal proof tap handle?
How can I remove stuck anti-vandal rings in tap head? Using an anti-vandal tap head spanner (shown below), but the prongs bend/break, as the screws are quite stuck. Using a hair-dryer to heat up the ring before using the spanner. Adjusting the rings to tighten, then to loosen. Applying WD-40 to the rings.
What causes dripping faucet?
The typical causes for a leaky faucet include corrosion, mineral deposit on the internal parts, or defective gaskets, o-rings, or washers. The most common issues of leakage are a dripping faucet, leakage in toilet flappers, or leaking valves, all of which can be easily fixed.
