Table of Contents
In general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level. Posts that extend 6 feet above ground level should have holes at least 2 1/2 feet deep.
How much concrete do I need for an 8 foot post?
The post must be at least two feet into the ground, and the concrete should reach about four inches from the surface. Depends on how big you make that hole, that’s how much concrete you will need. 8ft post 4/4 6ft out 2 ft in ground 1 and 1 /2 bag poured in the hole then add water. 8ft post 4/6 2 bags.
How deep should a 7 foot post be in the ground?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
How deep should a 9 ft post be?
Determining Post Length For any type of fence, the depth of the hole you must dig depends on how tall the post will be above ground. You should always bury one-third of your fence post underground. For a 6-foot fence, for example, you need a 9-foot post, so that 3 feet can be underground.
How deep should post be for 8 foot fence?
How Deep Should a Fence Post Be? For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.
Can you put dry concrete in a post hole?
Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.
How deep should a 10 foot post be in the ground?
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post.
How far apart should I put fence posts?
Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.
Should wooden fence posts be set in concrete?
Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.
How long should a 6 foot fence post be?
Keep the height of your fence in mind when digging your post holes. As a general rule of thumb, you’ll need to place at least 1/3 the height of the post in the ground. For example, a 6-foot tall fence will need at least 2 feet of post in the ground.
How do you dig a 6 foot post hole?
How to Dig a Hole: Pro Tips Step 1: String your line and pound the stakes. Step 2: Carve out a soil divot with a spade. Step 3: Loosen earth with a tile shovel. Step 4: Use your clamshell digger. Step 5: Use a reciprocating saw on large roots. Step 6: Dislodge rocks with a digging bar. Step 7: Tamp the soil with the other end.
How many rails do I need for a 6 foot fence?
All fences will have a top and bottom rail. One general rule of thumb is to have a horizontal rail for every 24 inches in height. For a six-foot-high fence, this means three rails. While a middle rail may not be a structural necessity, it will help keep fence boards in place and may limit warping and twisting.
How big of a hole do you need for a 4×4 post?
The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter. For a six-foot-high fence post, we would need a hole that’s 36 inches deep and 12 inches in diameter.
Can pressure treated posts be set in concrete?
Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. Concrete should be poured around the post – no concrete under the post.
How big should the hole be for a deck post?
Dig, align, and finish the job Dig an 8″-diameter hole at least 6″ deeper than your area’s frost line for each 4×4 post, using a power auger, hand auger, or post-hole digger. A 6×6 post requires a 10″-diameter hole. Shovel a 6″ layer of gravel into the hole to provide drainage.
How long is an 8 foot fence post?
Length: 8 ft. Diameter: 3 to 4 in.
