Table of Contents
A standard dresser has between six and nine drawers, is around waist tall (26″ – 44″), is 36″ – 60″ wide, and is 16″ – 20″ deep. However, these can vary and you should choose an option that works best in your bedroom.
How deep should a dresser drawer be?
The depth of any dresser is approximately 16 to 22 inches. The greater depth provides more stability needed in taller chests or dressers with mirrors attached to them. Drawers pull out 10 to 12 inches for use, so add that measurement to the depth when planning where to place your dresser.
How big should a dresser drawer be?
Dresser drawers should be no more than 36 inches wide. Specifically, states Squidoo.com, a “standard size pine chest of drawers” is typically sized in either “17-inch width, 24-inch width, 30-inch width or 36-inch width” drawers.
How much clearance does a dresser drawer need?
Three feet of clearance is essential from the doorway to the nearest furniture. Dresser: At least 2 feet of walking space is required in front of a dresser to allow for opening and closing drawers with ease.
What is a good size for a drawer?
Drawers can be built almost any width for bottom mount, but the most common size is 3/4-inch smaller on both sides than the cabinet opening. For example, if the opening is 12 inches wide, the drawer should be built 10 1/2 inches wide.
How deep are typical drawers?
Depth: Standard depths are 14-inches, 16-inches and 20-inches. Height: The height of the drawer refers to the height of the drawer face. The actual height of the box is usually less.
How do you measure the depth of a drawer?
Begin by measuring along the bottom floor of the drawer at the back edge, middle, and front edge. Check for variations across the height of the drawer as well. Take the smallest of these measurements. Repeat this step for the depth measurement on the left edge, middle, and right edge across the floor and the height.
How do you find the area of a drawer?
Measure the height and width of the drawer opening and add 1-1/2 inches to get the face size of the drawer. For example, if the drawer opening measures 18-by-22 inches, you will need to cut one piece 3/4-by-19 1/2-by-23 1/2 inches.
What is the average size of a chest of drawers?
Although there is no standard size for a chest of drawers, the most common size is 38 inches wide. A chest of drawers this size is small enough to fit in most bedrooms, but large enough to have ample storage space.
What are the dimensions of a chest of drawers?
How big are dressers? Dressers come in a large range of sizes to meet varied storage demands, but dressers commonly have overall depths between 18”-24” | (46-61 cm), heights between 30”-50” (76-127 cm), and widths between 30”-74” (76-188 cm).
What depth is a wardrobe?
Most wardrobe cabinets typically are 24 inches deep, but can be as narrow as 18 or even 12 inches in depth. Height also depends on application, but standard height is usually no more than 72 inches.
How much clearance do you need between bed and dresser?
Distance between a bed and the wall or dresser: 24″ inches A bed needs at least two feet of walking space around it to accommodate room to make up your bed (unless you need a good excuse not to) and for opening and closing the drawers of your dresser or doors of a closet.
What are standard closet dimensions?
A typical reach-in closet is approximately 6-feet long, 8-feet high, 24-inches deep with an 80-inch high door opening. Reach-in closets are very practical for a single occupant. They allow for easy viewing and access to all contents. Accessories and baskets work well in them.
How thick are drawer slides?
Light duty slides might be as thin as 1/2″, while heavy duty slides may be over 3/4″ thick. Face frame cabinet slides are easier to install using the specific, optional, face frame brackets. Length sizing is usually simplified by checking manufacturer’s charts, where the drawer size and cabinet depth are both stated.
How do I choose a drawer slide size?
Measure the box, not the drawer front Start at the back of the box and measure to the front of the box without including the face of the drawer. Once you have the length, round the number down. For example, if the drawer is 20 ½ inches long you will need to purchase 20 inch drawer slides.
What’s the difference between a chest of drawers and a dresser?
First, you should know the difference between a chest of drawers and a dresser. However, a dresser is usually wide and short, while a chest of drawers is narrow and tall. Dressers are meant to provide a space you can dress in front of – the top serves as a table to place clothes and provides space for a mirror.
How long is a standard drawer?
You have to measure the inside area (box) for the drawer, which does not include the drawer front. Since kitchen cabinets measure at least 22 inches of depth inside, that box cannot be more than 22 inches. Drawer runners are also sized to standard lengths – whole numbers from 18 to 22 inches.
How tall is a standard 5 drawer dresser?
The standard dresser height is usually between 30 and 36 inches.
How shallow can a closet be?
The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn’t deep enough to allow hanging clothes.
How deep are shelves in a closet?
Most typical closet shelving is 14” deep, partly because that depth works well for most folded clothing but also because that dimension provides excellent yield from the typical sizes of materials that are available to closet manufacturers, which minimizes waste.
How deep should a closet be for a hanger?
Unless you are working with tiny baby garments, your hangers will require a closet with at least 22-inches of depth in order to swing freely on the rod. The rods must also be hung at prescribed distances from the floor and ceiling because they must accommodate the various lengths of clothing found in typical wardrobes.
