Table of Contents
Most
What Is a Counter-Depth Refrigerator? | Maytag
fridge dimensions top out with a depth of around 30 inches. By contrast, traditional refrigerators can be as deep as 36 inches. To make up for the shallower depth measurement, standard counter-depth fridge dimensions tend to be wider (around 36 inches).
What is the shallowest depth refrigerator?
What is the shallowest depth refrigerator? The most shallow counter-depth refrigerators have depths of about 24 inches not including handles.
Are all counter-depth refrigerators the same depth?
Counter-depth refrigerators are typically under 30 inches deep. By contrast, most full-size refrigerators are over 30 inches deep, often in the 35- to 36-inch range. So, in many kitchens, traditional refrigerators may stick out half a foot or more from the edge of the kitchen counters.
What is difference between counter-depth and cabinet depth refrigerator?
Counter-Depth Refrigerators Defined Generally speaking, a kitchen’s counters will arrive at around the 25-inch mark when their depth is measured and cabinets are typically 24 to 24 1/2-inches deep. Manufacturers make fewer counter-depth products compared to standard depth fridges which affects unit-level cost.
Is counter-depth deeper than standard?
The distance from your backsplash to the front of your kitchen counters is one way to gauge your “counter-depth.” To fit within this space, counter-depth fridges are shallower than a standard-depth fridge, with a typical range of 23 to 27 inches deep.
What is standard countertop depth?
While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar. The island countertop depth depends on the availability of space.
How far should a refrigerator stick out from cabinets?
In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.
Why are counter-depth refrigerators so expensive?
Counter-depth refrigerators are less popular than standard-depth refrigerators, which can impact the unit-level price. Manufacturers often use thicker, more expensive insulation materials to maximize interior space. This contributes to their higher price.
How far should a refrigerator be away from the wall?
You should leave between 12 to 12 of clearance between the walls and cabinets. You should leave at least 1 inch of clearance in the rear. 1-2 Inches is ideal because it will help push the fridge out slightly away from the wall.
Does refrigerator depth include handles?
The depth of a refrigerator is the measurement from the back of the unit to its front and does not include its door handle. In comparison, a standard or full-size refrigerator has more depth, which makes it stick out farther from the surrounding cabinetry.
How much space do you lose with a counter-depth refrigerator?
By combining counter depth styling and 25 cu. ft. of capacity, you no longer have to sacrifice space to take home the style you want. Counter depth styling gives you an extra 5″ of kitchen space, while fitting virtually flush with your current counters and other kitchen fixtures.
How deep is a built in refrigerator?
Built-in refrigerators are taller and have cabinet depth, which means they are 24″ deep. They come in many different sizes, ending at 48″ wide. Built-in fridges are taller than their free-standing counterparts, most being at 84″ tall.
How deep are standard kitchen cabinets?
Standard kitchen cabinet heights include 12, 15, 18, 30, 36 and 42 inches tall; depth ranges from 12 to 18 inches. Typically installed 18 inches above countertops, 54 inches above floor and 24 inches above stove.
Will a 36 inch refrigerator fit in a 36 inch opening?
Usually! A 36″ refrigerator is designed to fit into a 36″ finished opening!! A 36 inch wide refrigerator should only be placed in an opening at least as wide as the manufacturer’s recommendation. Remember that appliances are NOT built to machine-shop tolerances and neither are cabinets.
How deep are upper kitchen cabinets?
Standard wall cabinets (sometimes referred to as “upper cabinets”) are 12 inches deep; standard base (below-counter) cabinets are 24 inches deep.
What is the standard overhang for a kitchen countertop?
A countertop overhang is a part of the countertop that extends past the cabinets and covers the drawers and cabinets to help prevent spills of crumbs and liquids from falling off the edge of the counter. A standard countertop usually has an overhang of 1½ inches.
What size cabinet goes above a fridge?
In standard kitchens, the wall cabinets are typically 30 or 36 inches tall, with the space above enclosed by soffits. Where the cabinets run all the way to the ceiling, 48-inch cabinets are the logical choice. A 12-inch or 15-inch tall cabinet fits neatly over a refrigerator.
Are counter-depth refrigerators more popular?
Counter-depth refrigerators have been on the market for a few years and continue to grow in popularity, with more models and options being introduced every year. Let’s take a look at the pros and cons of counter-depth refrigerators, and whether one is right for your kitchen.
Do counter-depth refrigerators cost more?
Counter-depth appliances typically cost about 15 to 20 percent more than standard refrigerators that have comparable features, and it is not uncommon for the appliance to be slightly smaller in capacity.
