Table of Contents
A standard bath tub is 14 to 17 inches in depth. A European style is 18 inches deep and a Japanese (or Greek) style is 22 or more inches in depth. There are numerous makes and models of bath tub styles including built-in, freestanding, soaking, and whirlpool. These tub styles have only frontal exposure.
What is a good depth for a bathtub?
Standard tub depths allow for approximately 12” of water; soaking tubs should offer at least 14” or more so that the water covers the majority of the bather’s body. To determine water depth, measure the tub from the bottom (interior) to the overflow drain.
What is a standard size tub?
Standard tubs usually have external measurements around 60 inches long, 30 inches wide and 14 to 16 inches high.
What is the difference between a soaking tub and regular tub?
Deeper than the average bathtub, soaking tubs are designed to offer the ultimate in relaxation by allowing you to fully submerge. When it comes to size, soaking tubs blow regular tubs out of the water, with some topping out at 90 inches in length and 76 inches in width—big enough to accommodate two bathers.
What is a deep soaking bathtub?
A deep soaking bathtub is a compact bath that is shorter but deeper than conventional baths. Essentially, it relies on depth rather than length for its capacity and comfort. A 3D model of the Yasahiro deep soaking tub, showing the in-built seat, armrests and head-rest.
What makes a good soaking tub?
If you want a true soak experience, consider a capacity of at least 60 gallons. For an extra-deep soak, there are freestanding and clawfoot tubs with capacities up to 80 gallons. A small to midsize whirlpool tub usually falls in this range as well.
Is a 60 inch tub really 60 inches?
Most 60″ tubs are not the full 60″ long (but are often close). The measure is from the outer rim to outer rim of any projection and a 60″ tub is designed to slide into a rough-in space of 60″ long.
Are all bathtubs 60 inches?
In general, standard dimensions will give you a rough figure for the size of the bathtub. However, they all vary depending on the shape and type of bathtub you are looking to purchase. For a typical standard, wall-wall bathtub, the measures will be roughly 60 inches long, 30-32 inches wide.
Can I replace a 30 inch tub with 32?
Going from 30″ to 32″ depends on your space there. Normally if a toilet is alongside, it’s 15″ from tub to center so that you have some elbow room. The drain is most likely about in the same location as before, or at most about an inch offset.
Do I need a soaker tub?
The short answer, when considering resale, is yes. Ideally you should have at least one bathtub in your home if you plan to sell in the near future, but this does not have to be in your master bathroom. If your master bath is spacious enough, consider a freestanding tub and large shower as an additional amenity.
Can a soaker tub have a shower?
All that said: Heck, soaker tubs are great — if you (1) already have one normal-sized tub in the house and (2) have one bathroom large enough for both a walk-in shower and nearby, a stand-alone soaker tub.
How much does it cost to install a soaker tub?
A freestanding, soaking tub measuring 5-feet costs around $650. Installation is easier and costs around $550 for the plumbing. A standard soaking tub without feet or a platform requires no special installation, making the total around $1,200.
How is bathtub soaking depth measured?
To find the soaking depth of a tub, measure the inside wall of a bathtub from the base to the overflow drain at its deepest point. The most common bathtub soaking depth is 14″ – 17″. Once you’ve calculated your desired basin size, consider the volume of water it will take to fill.
How deep should a Japanese soaking tub be?
These Japanese soaking tubs have built-in seats and are much deeper than a regular American-style tub—about 27 inches deep, so that you sit upright and the water comes up to your chin, making it a true deep soaking tub.
What is the deepest alcove soaker tub?
On the other hand, alcove soaking tubs can vary on their depth and size, but will generally have a depth of 19-20 inches with 14 or more inches of soaking depth.
Which is better acrylic or fiberglass tub?
Acrylic is much more durable than a fiberglass tub. The chance of an acrylic tub chipping, cracking or fading is unlikely. Fiberglass tubs can fade and get cracked and scratched over time. Both styles can be cleaned with simple cleaning solutions.
What is the strongest bathtub material?
Cast iron tubs are made by pouring molten iron into a mold of the desired shape, then smoothing it and coating it with a thick layer of enamel. It’s probably the most durable tub available, and the finish is resistant to chipping, scratching and denting, as well as most types of chemicals.
Is porcelain tub better than acrylic?
Acrylic tubs are cheaper, easier to install, and mildew-resistant, but they are less durable and harder to clean and maintain than porcelain. Porcelain tubs are more durable, scratch- and stain-resistant, and easier to clean and maintain, but they are harder to install and more expensive than acrylic tubs.
How do I measure my bathtub?
Using a power tape, measure the edge of the tub from one end to another for height and width. To measure the height of the bathtub, take measurement from the floor to the top. If you don’t get a round figure, take a number that is close to the standard size, that is listed below.
How do you know what size bathtub to buy?
Generally, if your home can support it and you have the space for it, a larger tub is recommended. In the case of freestanding and corner bathtubs, if you have the requisite space, then by all means, choose those styles. But, if your space is more limited, alcove, drop-in, and soaking might be more suitable for you.
What are the rough in dimensions for a tub?
The standard rough-in dimension for a bathtub is 60-¼”. But if there’s a gap, you can attach furring strips to the stud wall. You can also apply some cement or plywood. Finally, if the rough-in space is too small, you have to tear the stud wall down or replace the bathtub.
Do they make a 58 inch bathtub?
– 58 in. – Bathtubs – Bath – The Home Depot.
What is the shortest bathtub available?
The shortest freestanding tub is a mere 48 inches, or four feet long, and can work well for children’s bathrooms or even for adults of average height.
