Table of Contents
While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar.
What is the average depth of a counter?
Average Counter Depth: Average kitchen countertop depth comes in at 25-1/2 inches. Occasionally, depth can go down as low as 24 inches or as high as 26 1/2 inches. Various factors may change depth: Base cabinets positioned at slightly different distances away from the wall.
What is the standard height and depth of a kitchen counter?
Countertop dimensions Standard countertop height is 36 inches (92cm). There’s a bit more discussion on different mid height and desk height countertop heights further down this page. Standard countertop depth is 25 inches (63.5cm) or 30 inches (76cm).
What is a standard kitchen counter size?
Countertop Width Standards Most homes are fitted with kitchen countertops that measure 25.5 inches in width (from the wall to the edge of the counter), with some measuring up to 28 inches. Standard measurements allow for a 1.5-inch overhang over 24-inch deep base cabinets.
How deep is a granite countertop?
What is the standard depth of granite countertops? The industry standards typically hover around 1 and 1/4 inch (or 3 centimeters) for granite and marble kitchen island countertops and 3/4 inch (or 2 centimeters) for bathroom granite and marble vanity tops.
What is the typical depth of kitchen counters?
Countertops in many home stores are sold by the linear foot not a square foot, which is 12 inches by 12 inches. A linear foot is 12 inches wide and 25 inches deep because the standard depth of kitchen countertops is 25 inches.
What is standard depth and counter depth?
Counter depth refrigerators are shallower and wider than standard depth refrigerators, with a depth range of 23 to 27 inches. These units usually have French doors or side-by-side doors, with a smaller freezer compartment on the left and a larger refrigerated section on the right.
What is the best height for kitchen counter?
For countertops, the established standard is for the top of the countertop to fall about 36 inches above the floor. So widely accepted is this standard is that base cabinet manufacturers build all their cabinets to a height of 34 1/2 inches, assuming an adequate toe kick and countertop thickness will be 1 1/2 inches.
What is the height of a standard kitchen counter top?
Kitchen – The standard kitchen counter height is 36 inches (3 feet) above the floor. Kitchen islands designed for bar-style seating can climb as high as 42 inches.
What is the ideal height for kitchen worktops?
Kitchen worktop height should be no more than 900mm or 36”. This is standard height.
Is there a standard size for countertops?
The standard width for kitchen countertops is 25 inches. Depending on your specific space, this number can fall within the range of 24 ½ to 25 ½ inches. In the bathroom, countertops are typically between 19 ½ to 22 ½ inches wide.
How big should a countertop be?
Sizing Countertops Counters should be a minimum of 24 inches deep. Altogether, this will give you just a little over 26 square feet of workspace. Additionally, you should allow at least 15 inches of vertical space between your countertop and the upper cabinets.
What size countertop do I need?
To measure your countertops, start by measuring the length of all counter tops, base cabinets, and island. Also include the inches of back splash. Now measure the width of the counter tops and multiply the total length of the counter tops by the width in inches.
Are all countertops the same depth?
What is the Standard Depth of a Kitchen Counter? The standard depth for kitchen countertops is 25 ½ inches deep. While you can have a countertop that is deeper, countertops that measure more than 25 ½ inches deep have vast amounts of wasted space.
How far do countertops overhang?
How far should a countertop overhang on the side? Generally, the standard overhang of a countertop is 1 to 1 ½ inches from the cabinet, while the exposed ends of a countertop will usually have a ½ inch overhang, and the ends that meet a wall don’t have any overhang at all to keep the fit flush to the wall.
How deep is a kitchen island with seating?
The standard length of a 6-seat island is 14′. Depth is 42″.
How much space should be between kitchen counter and island?
The recommended distance between a kitchen counter and a kitchen island is at least 42 inches. If sharing cooking duties, it should be at least 48 inches. Wheelchairs require 60 inches of space.
What is the difference between standard depth and counter depth refrigerator?
Counter depth refrigerators tend to be shallower than standard depth but they generally will be wider or taller. This unit typically is 23 to 27 inches deep; the shallower depth makes it easier to grab items near the back of the fridge and provides a blended look with it’s surroundings.
What is standard depth on a refrigerator?
Standard-depth fridges do take up more space than counter-depth models—as mentioned, generally running 35- to 36-inches deep when the doors and handles are included.
What is the standard depth of a counter depth refrigerator?
Most counter-depth fridge dimensions top out with a depth of around 30 inches. By contrast, traditional refrigerators can be as deep as 36 inches. To make up for the shallower depth measurement, standard counter-depth fridge dimensions tend to be wider (around 36 inches).
What is the standard height for a kitchen island?
A standard counter-height kitchen island is 36 inches high while a bar-height kitchen island is 42 inches high.
What height is counter height?
A counter-height table runs about 34 to 36 inches tall, and standard dining-height tables range from 28 to 30 inches tall.
Is 45 inches too high for a bar?
Commercial Bars They should measure between 42 to 45 inches. In this case, you should consider the average height of both males and females, which is 5 feet, 4 inches. This is equivalent to 64.8 inches, which makes 42 -45 inches perfect for a commercial bar setting.
