Table of Contents
Refrigerators are categorized between counter-depth and standard-depth models, with refrigerator depth ranging from 24 to 36 inches deep. Counter-depth fridges align with the edges of countertops and measure between 24 to 30 inches deep, whereas standard-depth appliances may extend to 30 to 36 inches.
How deep is a standard refrigerator?
In contrast, most full-size standard-depth refrigerators are more than 30 inches deep, commonly in the 35- to 36-inch range. This means a traditional refrigerator may jut out more than six inches from the edge of the countertop.
Are all fridges the same depth?
Counter-depth refrigerators are typically under 30 inches deep. By contrast, most full-size refrigerators are over 30 inches deep, often in the 35- to 36-inch range. So, in many kitchens, traditional refrigerators may stick out half a foot or more from the edge of the kitchen counters.
How deep is counter-depth for a fridge?
Most counter-depth fridge dimensions top out with a depth of around 30 inches. By contrast, traditional refrigerators can be as deep as 36 inches. To make up for the shallower depth measurement, standard counter-depth fridge dimensions tend to be wider (around 36 inches).
How much space is needed around a refrigerator?
Measure the Ventilation Space Air must be able to circulate around the box to help the refrigerator run efficiently, avoid overheating and last its full life span. The refrigerator will need minimum clearances of 2-inches from the back wall, 1-inch from the upper cabinet and 1/8-inch on either side of the fridge.
Will a 36 inch refrigerator fit in a 36 inch opening?
Usually! A 36″ refrigerator is designed to fit into a 36″ finished opening!! A 36 inch wide refrigerator should only be placed in an opening at least as wide as the manufacturer’s recommendation. Remember that appliances are NOT built to machine-shop tolerances and neither are cabinets.
How far is too far for a refrigerator to stick out?
Standard refrigerators are typically 32 to 36 inches deep or more, and since countertops are normally about 25 inches deep (24 inches for the base cabinet with a 1-inch overhang) this means that a standard refrigerator will stick out from adjoining countertops by 6 inches or more.
What refrigerator has the smallest depth?
Above: The Liebherr 36-Inch Counter-Depth 4-Door French Door Refrigerator (CBS2082) is the most shallow on our list at 24 inches deep.
What is standard depth vs counter-depth?
A kitchen’s counters are typically between 24 and 25 inches deep, meaning that standard-depth fridges will stick out from the edge of your countertops by 5 to 10 inches.
Why are counter depth refrigerators so expensive?
Counter-depth refrigerators are less popular than standard-depth refrigerators, which can impact the unit-level price. Manufacturers often use thicker, more expensive insulation materials to maximize interior space. This contributes to their higher price.
How far does fridge need to be from wall?
The refrigerator should be at least two inches from the wall. Top — If you have back coils, you will need at least two inches of top clearance to dissipate heat, but for bottom coils, as little as one inch can be sufficient. Sides — Regardless of coil placement, the sides require the least amount of space.
What happens if fridge is near wall?
Why Do I Need to Leave Room Between the Refrigerator and the Wall? Without adequate ventilation, the refrigerator can overheat, and the unit may display immediate symptoms or slowly deteriorate over the course of time with issues that may include: Insufficient cooling. Unusual or loud operation.
How big of a fridge can I fit?
As a rule of thumb, you want about 4-6 cubic feet of storage per person in your household. Most fridges for sale will list their cubic foot capacity, but if you’re not sure, use a cubic foot calculator to figure it out based on the refrigerator’s width, depth, and height.
What is the rough opening for a 36 refrigerator?
To obtain the most integrated look, the cabinet or soffit above the refrigerator should extend out to the same depth as the side panels. The refrigerator opening must have minimum dimensions of 70″ high x 36-1/8″ wide x 24-1/2″ deep as shown at right.
How wide is a built-in refrigerator?
The typical built-in refrigerator towers over 80 inches and can be up to 48 inches wide, and will take a massive bite out of your budget—sometimes $10,000 or more.
What is standard kitchen counter-depth?
While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar. The island countertop depth depends on the availability of space.
What is difference between counter-depth and cabinet depth refrigerator?
Counter-Depth Refrigerators Defined Generally speaking, a kitchen’s counters will arrive at around the 25-inch mark when their depth is measured and cabinets are typically 24 to 24 1/2-inches deep. Manufacturers make fewer counter-depth products compared to standard depth fridges which affects unit-level cost.
What is counter-depth installation?
A “counter-depth” or “cabinet-depth” appliance is one designed so that the appliance is roughly the same front-to-back depth as the countertops and base cabinets. It’s also an option for other kitchen appliances that typically jut out past the face of the countertops.
Should refrigerator be flush with cabinets?
In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.
