Table of Contents
Most counter-depth fridge dimensions top out with a depth of around 30 inches. By contrast, traditional refrigerators can be as deep as 36 inches. To make up for the shallower depth measurement, standard counter-depth fridge dimensions tend to be wider (around 36 inches).
What is the difference between standard depth and counter-depth?
standard depth refrigerators is depth dimension. Counter depth fridges fit nearly flush with your cabinetry, but measure smaller in depth than standard size fridges. For certain counter depth models, a larger width and height make up for some lost storage.
Are all counter-depth refrigerators the same depth?
Counter-depth refrigerators are typically under 30 inches deep. By contrast, most full-size refrigerators are over 30 inches deep, often in the 35- to 36-inch range. So, in many kitchens, traditional refrigerators may stick out half a foot or more from the edge of the kitchen counters.
Do counter-depth refrigerators have less space?
Because counter-depth fridges are shallower than standard ones, they tend to offer less cubic feet of interior food storage space. Standard fridge/freezer combos average between 22 and 31 cubic feet of space, while baseline counter-depth fridges are between 20 and 23 cubic feet. Shallower depth can be limiting.
What is a standard counter-depth?
While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar. The island countertop depth depends on the availability of space.
Why are counter depth refrigerators more expensive?
To achieve the same capacity as a standard appliance, a shallower counter-depth appliance needs to be considerably wider. This can mean a reduction in countertop space, as well as a wider door that requires a larger swing radius. And this special design may cost more than a standard appliance.
Why is counter-depth expensive?
Counter-depth refrigerators have some disadvantages. Counter-depth refrigerators are less popular than standard-depth refrigerators, which can impact the unit-level price. Manufacturers often use thicker, more expensive insulation materials to maximize interior space. This contributes to their higher price.
How far is too far for a refrigerator to stick out?
Standard refrigerators are typically 32 to 36 inches deep or more, and since countertops are normally about 25 inches deep (24 inches for the base cabinet with a 1-inch overhang) this means that a standard refrigerator will stick out from adjoining countertops by 6 inches or more.
What refrigerator has the smallest depth?
Above: The Liebherr 36-Inch Counter-Depth 4-Door French Door Refrigerator (CBS2082) is the most shallow on our list at 24 inches deep.
Should refrigerator be flush with cabinets?
In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.
How deep is a built in refrigerator?
Built-in refrigerators are taller and have cabinet depth, which means they are 24″ deep. They come in many different sizes, ending at 48″ wide. Built-in fridges are taller than their free-standing counterparts, most being at 84″ tall.
What is the difference between counter-depth and regular refrigerator?
Counter depth refrigerators tend to be shallower than standard depth but they generally will be wider or taller. This unit typically is 23 to 27 inches deep; the shallower depth makes it easier to grab items near the back of the fridge and provides a blended look with it’s surroundings.
How deep should my countertop be?
What is the Standard Depth of a Kitchen Counter? The standard depth for kitchen countertops is 25 ½ inches deep. While you can have a countertop that is deeper, countertops that measure more than 25 ½ inches deep have vast amounts of wasted space.
How deep should my fridge be?
Step 3: Measure for refrigerator depth To determine refrigerator depth, measure from the wall to the edge of your countertop. These dimensions should be roughly 24 to 25 inches deep.
Which counter-depth refrigerator has the most space?
KitchenAid KFRC704 KitchenAid model KRFC704’s massive 23.8 capacity is one of the largest available in a counter-depth refrigerator and actually rivals capacities of many standard depth options.
Will a 36 inch refrigerator fit in a 36 inch opening?
Usually! A 36″ refrigerator is designed to fit into a 36″ finished opening!! A 36 inch wide refrigerator should only be placed in an opening at least as wide as the manufacturer’s recommendation. Remember that appliances are NOT built to machine-shop tolerances and neither are cabinets.
Does fridge depth include doors?
The depth of a refrigerator is the measurement from the back of the unit to its front and does not include its door handle. In comparison, a standard or full-size refrigerator has more depth, which makes it stick out farther from the surrounding cabinetry.
Do refrigerators come in 24 inch depth?
If you’re dealing with a kitchen full of tight corners, the depth of a refrigerator is just as important as its width. What you need is a slender 24-inch wide counter-depth fridge; counter-depth meaning 24 to 29 inches deep (to stand flush with standard 24- and 25-inch cabinets).
What size cabinet goes above a fridge?
In standard kitchens, the wall cabinets are typically 30 or 36 inches tall, with the space above enclosed by soffits. Where the cabinets run all the way to the ceiling, 48-inch cabinets are the logical choice. A 12-inch or 15-inch tall cabinet fits neatly over a refrigerator.
What is a French door on a refrigerator?
French door refrigerators have one continuous refrigerator space on top accessed by two doors, with a freezer drawer below. Both models tend to come with a wide range of features such as exterior ice and water dispensers, adjustable shelves and door bins, along with higher-end finish options.
