Table of Contents
Most
What Is a Counter-Depth Refrigerator? | Maytag
fridge dimensions top out with a depth of around 30 inches. By contrast, traditional refrigerators can be as deep as 36 inches. To make up for the shallower depth measurement, standard counter-depth fridge dimensions tend to be wider (around 36 inches).
What is the shallowest refrigerator depth?
What is the shallowest depth refrigerator? The most shallow counter-depth refrigerators have depths of about 24 inches not including handles.
What is difference between counter-depth and standard depth?
Standard Depth: Which Refrigerator is Right For You? The main difference between counter depth and standard depth refrigerators is dimension. Counter depth fridges are shallower to achieve a built-in appearance while standard fridges generally offer more capacity.
What is difference between counter-depth and cabinet depth refrigerator?
Counter-Depth Refrigerators Defined Generally speaking, a kitchen’s counters will arrive at around the 25-inch mark when their depth is measured and cabinets are typically 24 to 24 1/2-inches deep. Manufacturers make fewer counter-depth products compared to standard depth fridges which affects unit-level cost.
How far should a refrigerator stick out from cabinets?
In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.
Why are counter depth refrigerators more expensive?
To achieve the same capacity as a standard appliance, a shallower counter-depth appliance needs to be considerably wider. This can mean a reduction in countertop space, as well as a wider door that requires a larger swing radius. And this special design may cost more than a standard appliance.
Does refrigerator depth include handles?
The depth of a refrigerator is the measurement from the back of the unit to its front and does not include its door handle. In comparison, a standard or full-size refrigerator has more depth, which makes it stick out farther from the surrounding cabinetry.
Are counter depth refrigerators wider?
With a refrigerator depth between 23 to 27 inches, counter-depth fridges are typically wider and taller than standard-depth fridges to compensate for the reduced volume and to be more space-efficient. Counter-depth units usually have French doors or side-by-side doors.
Do you lose space with a counter-depth refrigerator?
By shaving off a few inches, counter depth refrigerators offer a shallower build than their standard depth counterparts. However, the disadvantage to this is that you lose some interior space and will have less storage capacity for food items.
How deep is a built in refrigerator?
Built-in refrigerators are taller and have cabinet depth, which means they are 24″ deep. They come in many different sizes, ending at 48″ wide. Built-in fridges are taller than their free-standing counterparts, most being at 84″ tall.
Do counter depth refrigerators have less space?
Because counter-depth fridges are shallower than standard ones, they tend to offer less cubic feet of interior food storage space. Standard fridge/freezer combos average between 22 and 31 cubic feet of space, while baseline counter-depth fridges are between 20 and 23 cubic feet. Shallower depth can be limiting.
Will a 36 inch refrigerator fit in a 36 inch opening?
Usually! A 36″ refrigerator is designed to fit into a 36″ finished opening!! A 36 inch wide refrigerator should only be placed in an opening at least as wide as the manufacturer’s recommendation. Remember that appliances are NOT built to machine-shop tolerances and neither are cabinets.
What size cabinet goes above a fridge?
In standard kitchens, the wall cabinets are typically 30 or 36 inches tall, with the space above enclosed by soffits. Where the cabinets run all the way to the ceiling, 48-inch cabinets are the logical choice. A 12-inch or 15-inch tall cabinet fits neatly over a refrigerator.
How much clearance does a refrigerator need?
Measure the Ventilation Space The refrigerator will need minimum clearances of 2-inches from the back wall, 1-inch from the upper cabinet and 1/8-inch on either side of the fridge.
What is standard countertop depth?
While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar. The island countertop depth depends on the availability of space.
How far should a refrigerator be away from the wall?
You should leave between 12 to 12 of clearance between the walls and cabinets. You should leave at least 1 inch of clearance in the rear. 1-2 Inches is ideal because it will help push the fridge out slightly away from the wall.
How much space do I need for a 36 inch refrigerator?
1-8 of 8 Answers. The unit is 35 and 3/4 inches wide. If you’re installing next to a wall, you’ll need a minimum clearance of 3 and 3/4 inches for the door.
Is 2 cubic feet a lot in a refrigerator?
Refrigerator capacity ranges It varies, but a general rule of thumb is that you’ll want 4 to 6 cubic feet (cu. ft.) of refrigerator space per adult in your household, along with a little bit of extra contingency room.
What’s the biggest counter depth refrigerator?
KitchenAid KFRC704 KitchenAid model KRFC704’s massive 23.8 capacity is one of the largest available in a counter-depth refrigerator and actually rivals capacities of many standard depth options.
How big of a fridge can I fit?
As a rule of thumb, you want about 4-6 cubic feet of storage per person in your household. Most fridges for sale will list their cubic foot capacity, but if you’re not sure, use a cubic foot calculator to figure it out based on the refrigerator’s width, depth, and height.
How far do upper cabinets stick out?
How high should wall cabinets be hung above the counter? “The standard distance is 18 inches” from the top of the counter to the bottom of the wall cabinet, Scott says.
