Table of Contents
The answer -— as it often does in fencing construction — depends. As a general rule, Fencing Direct recommends at least a 24-inch footing depth for a 4-foot fence, plus an extra 3 inches for every foot of height (for example, 27 inches for a 5-foot post).
Should I concrete my chain link fence posts?
You can install a chain link fence without using concrete, but it is not recommended. Anchoring each fence post in concrete is the best way to ensure your fence will stand straight and tall for many years.
Do fence post need to be in concrete?
Do Fence Posts Need To Be Set in Concrete? No, fence posts don’t need to be set in concrete, and there are plenty of other ways to fix your posts if this feels a bit too permanent. If you are using wooden posts, concrete may actually be the worst option.
How far apart do chain link fence posts need to be?
SPACING FENCE POSTS As chain link fence posts are smaller and sturdier than many other types, the holes should be smaller and can be farther apart. Follow the fence manufacturer’s instructions for spacing, which typically ranges from 4-10′ apart—spacing should not exceed 10′ on-center.
What height should a chain link fence post be?
End, corner and gate posts should be marked at the height of the fence plus 1 inch; 49″ for a 4′ fence, 61″ for a 5′ fence, etc. Mark intermediate or line posts at height of the fence minus 3 inches; 45″ for 4′ fence, 57″ for 5′ fence, etc. When you add your line post cap and top rail, the height will be accurate.
How deep should a metal fence post be?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
How do you install a chain link fence without digging?
5 Ways to Set a Fence Post Without Digging A Metal Spike Anchor and a Sledgehammer. If you are not wanting to dig to set your fence post, a metal spike anchor might be the easiest option. T-Post Driver. E-Z Spike. Steel Posts in the Ground. Above the Ground Fences.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
How shallow can a fence post be?
For any type of fence, the depth of the hole you must dig depends on how tall the post will be above ground. You should always bury one-third of your fence post underground. For a 6-foot fence, for example, you need a 9-foot post, so that 3 feet can be underground.
How much does a 100 foot chain link fence cost?
Average Chain-Link Cost Per Foot Linear Feet 4-foot Tall 6-foot Tall 50 $600 $750 100 $1,200 $1,500 150 $1,800 $2,250 200 $2,400 $3,000.
How do you secure the bottom of a chain link fence?
The simplest way to reinforce your chain link fence at the bottom is by using tent stakes. Tent stakes can be bought at any hardware store, and they are very cheap. If you don’t want to do any kind of installation or you’re just not the DIY person, then using tent stakes is a simple and straightforward solution.
Do I need a top rail for chain link fence?
Almost all permanent chain link fences have a top rail to support the weight of the chain link fabric and keep it from sagging over time. Often, chain link fences taller than 6′ also have a mid-brace rail, at least on each section between a terminal post and line post.
How far do you space fence posts?
Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.
What is the difference between a line post and a terminal post?
Terminal posts include corner posts and gate posts. They are usually taller and larger than line posts. Line posts are the vertical support structures for the chainwire fence which are usually spaced 10 or less feet apart. Other horizontal logs could rest on these line posts.
How deep should a 8 foot fence post be?
In general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level. Posts that extend 6 feet above ground level should have holes at least 2 1/2 feet deep.
How much concrete do I need for a chain link fence post?
Chain Link Fences Terminal posts require a hole with an eight-inch diameter that is anywhere from thirty inches to three feet deep. It takes about . 9 cubic feet to fill each of these holes. Three fifty-pound bags of concrete should be plenty to set each terminal post.
Can you put dry concrete in a post hole?
Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.
How do you install metal fence posts without concrete?
Here’s the step-by-step process in detail: Step 1: Dig the Hole. The first step is selecting your fence post location and digging your hole. Step 2: Fill the Base with Gravel. Step 3: Position your Fence Post. Step 4: Filling Hole & Tamping.
