Table of Contents
24 inches Height, without countertop 34 1/2 inches Height, with countertop 35 to 36 inches Depth (front to wall), without countertop 24 inches Depth, with countertop 25 to 26 inches Standard widths 12, 18, 24, 30, 33, 36, 48 inches.
How deep should lower cabinets be?
How deep should the cabinet boxes be? Standard wall cabinets (sometimes referred to as “upper cabinets”) are 12 inches deep; standard base (below-counter) cabinets are 24 inches deep.
Do kitchen base cabinets come in different depths?
An inch or an inch and a half can make a huge difference in cabinet size and installation. Base cabinets are rarely more than 24 inches deep, for a good reason. Anything deeper makes items stored at the back of the cabinets almost impossible to access without pull-out fittings.
Are upper and lower cabinets the same depth?
Their depths are certainly never identical. In fact lower cabinets are usually two feet deep, covered by a countertop that is longer only by an inch. Presumably designed to stay out of the way and create an uninhibited work space, upper cabinets therefore were made with a usual depth of only twelve to fifteen inches.
How deep are standard kitchen base cabinets?
Base cabinets: Rest on floor to support countertop. Typically, between 34 1/2 to 36 inches tall and 24 to 30 inches deep.
What is the standard toe kick height and depth?
Below the base cabinet, there is a recessed area known as the toe kick. It typically measures 3 inches in height and the depth is approximately 3.5 – 4 inches.
How much space should be between upper and lower cabinets?
The standard distance between the top of a kitchen counter and the bottom of the wall cabinets above it is 18 inches. For the average person, this distance is the ideal balance between plenty of space to work on the countertop and the ability to reach all of the shelves in the cabinet.
How do you measure for base cabinets?
Measurements should be taken from wall edge to wall edge in order to get the total space. The measurements for openings like doors or windows are taken from one underside of trim to the other underside of trim. The trim or molding around it are not included in the measurement.
How thick should kitchen cabinets be?
Side and floor panels inside the cabinet should be least a half-inch thick. Side panels should be routed with a groove to support the drawer base. Floor inside the cabinet should be fitted into the routed side panel. Shelves inside the cabinet should be least three-quarters of an inch thick.
How deep are shallow kitchen cabinets?
The shallowest base cabinets are 12 inches deep (Usually, a wall cabinet is used to achieve this depth). The width can range from nine inches wide to 36 inches wide.
Why are kitchen cabinets 24 inches deep?
More Usable Storage One 24-inch drawer offers 15% more storage than two 12-inch drawers. And full-extension deep drawers offer 55% more storage than a shallow drawer of the same width.
How deep is a kitchen counter?
While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar. The island countertop depth depends on the availability of space.
How much should a countertop overhang?
How far should a countertop overhang on the side? Generally, the standard overhang of a countertop is 1 to 1 ½ inches from the cabinet, while the exposed ends of a countertop will usually have a ½ inch overhang, and the ends that meet a wall don’t have any overhang at all to keep the fit flush to the wall.
How deep are kitchen cabinets UK?
Kitchen cabinets are usually 60 cm deep and have widths that are multiples of 10 cm or 15 cm. This sizing is illustrated by the base units shown below. Drawer units are usually offered in a variety of widths. Larder units are usually 30 cm wide and appliance units 60 cm wide.
Should toe kick match cabinets?
To avoid standing out, most toe kicks are painted either black the same color as the cabinets. They are there to serve a practical purpose, after all. According to the trend-setters at Apartment Therapy, that doesn’t always have to be the case.
How deep is a cabinet kick plate?
The optimal depth for a toe kick is 3 inches. This provides an adequate recess to stand comfortably and maintain balance while working at a countertop. Almost all factory-made stock cabinets will comply with this depth standard.
What is the minimum height of a toe board kickboard?
Toe boards should have a minimum height of 150mm, however typically on tube and fitting scaffold structures toe boards are 225mm scaffold boards.
How high should kitchen cabinets be from the floor?
However, the prevailing “standard” among kitchen remodelers is 54 inches from the floor to the bottom edge of the cabinet. The 18-inch clearance that spans the top of the base cabinets and the bottom of the upper cabinets are considered optimal working space and shouldn’t be blocked.
How tall are base cabinets with countertop?
This means that after you add the countertops, a base cabinet can be anywhere between 35 to 36 inches tall. Many designers and installers will quote the old adage, “countertops should fit the user.” This sometimes results in countertops at 32 inches or as high as 38 inches. Width- 9-46 inches (in 3 inch increments).
What is the distance between base and wall cabinets?
The distance between the base cabinet (including kitchen countertops) and wall cabinet is normally between 18 and 20 inches. This is low enough to provide easy access to the wall cabinet contents for most people, and still have enough space to keep and use small appliances as well as use the workspace comfortably.
